Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel

被引：44
|
作者：
Cicek, Adem [2 ]
Kivak, Turgay [1 ]
Samtas, Gurcan [1 ]
机构：
[1] Duzce Univ, Cumayeri Vocat Sch Higher Educ, TR-81700 Cumayeri, Duzce, Turkey
[2] Duzce Univ, Fac Technol, Dept Mfg Engn, Duzce, Turkey
来源：
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING | 2012年 / 58卷 / 03期
关键词：
cryogenic treatment; drilling; surface roughness; roundness error; Taguchi method; MACHINING PARAMETERS; CUTTING PARAMETERS; TOOL WEAR; OPTIMIZATION; DEVIATION; FORCE;
D O I：
10.5545/sv-jme.2011.167
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this study, the effects of deep cryogenic treatment and drilling parameters on surface roughness and roundness error were investigated in drilling of AISI 316 austenitic stainless steel with M35 HSS twist drills. In addition, optimal control factors for the hole quality were determined by using Taguchi technique. Two cutting tools, cutting speeds and feed rates were considered as control factors, and L-8(2(3)) orthogonal array was determined for experimental trials. Multiple regression analysis was employed to derive the predictive equations of the surface roughness and roundness error achieved via experimental design. Minimum surface roughness and roundness error were obtained with treated drills at 14 m/min cutting speed and 0.08 mm/rev feed rate. Confirmation experiments showed that Taguchi method precisely optimized the drilling parameters in drilling of stainless steel.
引用
收藏
页码：165 / 174
页数：10
相关论文
共 50 条
  • [41] The optimum condition selection of electrochemical polishing and surface analysis of the stainless steel 316L by the Taguchi method
    Seung-Geon Choi
    Seong-Hyun Kim
    Woong-Kirl Choi
    Eun-Sang Lee
    The International Journal of Advanced Manufacturing Technology, 2016, 82 : 1933 - 1939
  • [42] The optimum condition selection of electrochemical polishing and surface analysis of the stainless steel 316L by the Taguchi method
    Choi, Seung-Geon
    Kim, Seong-Hyun
    Choi, Woong-Kirl
    Lee, Eun-Sang
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (9-12): : 1933 - 1939
  • [43] Modelling the Boronizing Kinetics in AISI 316 Stainless Steel
    Abdellah, Z. Nait
    Keddam, M.
    Elias, A.
    ACTA PHYSICA POLONICA A, 2012, 122 (03) : 588 - 592
  • [44] Study on surface finish of AISI 2080 steel based on the Taguchi method
    Yalcinkaya, S.
    Sahin, Y.
    13TH INTERNATIONAL CONFERENCE ON TRIBOLOGY (ROTRIB'16), 2017, 174
  • [45] Application of Taguchi coupled with genetic algorithm (GA) for optimizing surface quality in drilling of duplex stainless steel 2205
    Sharma, Rajeev
    Pahuja, Vipin
    Jha, Binit Kumar
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2023,
  • [46] Effect of surface treatment on surface characteristics and biocompatibility of aisi 316L stainless steel
    Selvaduray, Guna
    Trigwell, Steve
    Proceedings of the Frontiers in Biomedical Devices Conference, 2007, : 27 - 28
  • [47] An investigation on boriding kinetics of AISI 316 stainless steel
    Ozdemir, O.
    Omar, M. A.
    Usta, M.
    Zeytin, S.
    Bindal, C.
    Ucisik, A. H.
    VACUUM, 2008, 83 (01) : 175 - 179
  • [48] Nitrocarburising of AISI 316 stainless steel at low temperature
    Jiang, L.
    Luo, H.
    Zhao, C.
    SURFACE ENGINEERING, 2018, 34 (03) : 205 - 210
  • [49] Effect of copper on the strength of AISI 316 stainless steel
    Carolan, R.A., 1600, (20 A):
  • [50] Diffusion bonding of zirconia to stainless steel AISI 316
    Vegter, RH
    van Helvoort, ATJ
    den Ouden, G
    JOURNAL OF ADVANCED MATERIALS, 2003, 35 (01): : 17 - 24
12345