Application of Taguchi Method for Surface Roughness and Roundness Error in Drilling of AISI 316 Stainless Steel

被引：44
|
作者：
Cicek, Adem [2 ]
Kivak, Turgay [1 ]
Samtas, Gurcan [1 ]
机构：
[1] Duzce Univ, Cumayeri Vocat Sch Higher Educ, TR-81700 Cumayeri, Duzce, Turkey
[2] Duzce Univ, Fac Technol, Dept Mfg Engn, Duzce, Turkey
来源：
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING | 2012年 / 58卷 / 03期
关键词：
cryogenic treatment; drilling; surface roughness; roundness error; Taguchi method; MACHINING PARAMETERS; CUTTING PARAMETERS; TOOL WEAR; OPTIMIZATION; DEVIATION; FORCE;
D O I：
10.5545/sv-jme.2011.167
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this study, the effects of deep cryogenic treatment and drilling parameters on surface roughness and roundness error were investigated in drilling of AISI 316 austenitic stainless steel with M35 HSS twist drills. In addition, optimal control factors for the hole quality were determined by using Taguchi technique. Two cutting tools, cutting speeds and feed rates were considered as control factors, and L-8(2(3)) orthogonal array was determined for experimental trials. Multiple regression analysis was employed to derive the predictive equations of the surface roughness and roundness error achieved via experimental design. Minimum surface roughness and roundness error were obtained with treated drills at 14 m/min cutting speed and 0.08 mm/rev feed rate. Confirmation experiments showed that Taguchi method precisely optimized the drilling parameters in drilling of stainless steel.
引用
收藏
页码：165 / 174
页数：10
相关论文
共 50 条
  • [21] Effect of Surface Roughness on Oxidation Resistance of Stainless Steel AISI 316Ti During Exposure at High Temperature
    Nowak, Wojciech J.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (12) : 8060 - 8069
  • [22] Application of Taguchi method to determine resistance spot welding conditions of austenitic stainless steel AISI 304
    Thakur, A. G.
    Nandedkar, V. M.
    JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2010, 69 (09): : 680 - 683
  • [23] Multi-response optimization of TIG dissimilar welding of AISI 1008 mild steel and AISI 316 stainless steel using grey-based Taguchi method
    Ogbonna, Okwudili Simeon
    Akinlabi Akinlabi, Stephen
    Madushele, Nkosinathi
    Fatoba, Olawale Samuel
    Akinlabi, Esther Titilayo
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 126 (1-2): : 749 - 758
  • [24] Splitting of AISI 316 austenitic stainless steel
    Janovec, J
    Bogyó, M
    Blach, J
    Záhumensky, P
    Vyrostková, A
    CANADIAN METALLURGICAL QUARTERLY, 2001, 40 (01) : 97 - 104
  • [25] Multi-response optimization of TIG dissimilar welding of AISI 1008 mild steel and AISI 316 stainless steel using grey-based Taguchi method
    Okwudili Simeon Ogbonna
    Stephen Akinlabi Akinlabi
    Nkosinathi Madushele
    Olawale Samuel Fatoba
    Esther Titilayo Akinlabi
    The International Journal of Advanced Manufacturing Technology, 2023, 126 : 749 - 758
  • [26] Laser Surface Melting of AISI 316L Stainless Steel for Bio-implant Application
    Majumdar, Jyotsna Dutta
    Kumar, Arun
    Pityana, Sisa
    Manna, I.
    PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES INDIA SECTION A-PHYSICAL SCIENCES, 2018, 88 (03) : 387 - 403
  • [27] Laser Surface Melting of AISI 316L Stainless Steel for Bio-implant Application
    Jyotsna Dutta Majumdar
    Arun Kumar
    Sisa Pityana
    I. Manna
    Proceedings of the National Academy of Sciences, India Section A: Physical Sciences, 2018, 88 : 387 - 403
  • [28] Effect of surface treatment on the surface characteristics of AISI 316L stainless steel
    Trigwell, Steve
    Selvaduray, Guna
    MEDICAL DEVICE MATERIALS III: PROCEEDINGS FROM THE MATERIALS & PROCESSES FOR MEDICAL DEVICES CONFERENCE 2005, 2006, : 208 - +
  • [29] Surface Roughness Optimization in a Drilling Operation Using the Taguchi Design Method
    Zhang, Julie Z.
    Chen, Joseph C.
    MATERIALS AND MANUFACTURING PROCESSES, 2009, 24 (04) : 459 - 467
  • [30] Experimental Investigation Of Quality Characteristics In Nd:YAG Laser Drilling Of Stainless Steel (AISI 316)
    Chatterjee, Suman
    Mahapatra, Siba Sankar
    Sahu, Anshuman Kumar
    Bhardwaj, Vijay K.
    Choubey, Ambar
    Upadhyay, Brahma N.
    Bindra, Kushvinder S.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (05) : 11526 - 11530
12345