Cross-Section Size Optimization of Cold-Formed Steel Lipped Channel Structural Members Subjected to Axial Compression

被引:0
|
作者
Yurchenko, Vitalina [1 ]
Perelmuter, Anatoly [2 ]
Peleshko, Ivan [3 ]
机构
[1] Kyiv Natl Univ Civil Engn & Architecture, Dept Civil Engn, Chair Steel & Timber Struct, 31 Povitroflotsky Av, UA-03680 Kiev, Ukraine
[2] SCAD Soft Ltd, 3A Osvity Str,Of 2, UA-03037 Kiev, Ukraine
[3] Lviv Polytech Natl Univ, Dept Bldg Prod, Inst Civil Engn & Bldg Syst, 6 Karpinskoho St,Bldg 2, UA-79013 Lvov, Ukraine
关键词
Cold-formed steel; Buckling resistance; Torsional-flexural buckling; Parametric optimization; Gradient-based methods; SHAPE OPTIMIZATION; BEAMS; COLUMNS; DESIGN;
D O I
10.2478/cee-2022-0044
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
A parametric optimization problem of cross-sectional sizes for cold-formed steel lipped channel structural members subjected to axial compression has been considered by the paper. An optimization problem is formulated to define optimum cross-sectional sizes of cold-formed structural member taking into account post-buckling behavior and structural requirements when stripe width, profile thickness and profile type are constant and specified in advance. Maximization of the load-carrying capacity of the cold-formed structural member has been assumed as purpose function. As optimization results cold-formed steel lipped channels with optimum dimensions have been obtained. Steel lipped channels structural members with the optimum cross-sectional dimensions have higher load-carrying capacities at the same material consumption (stripe width) comparing with the ones proposed by the manufacturer when the material consumption.
引用
收藏
页码:472 / 481
页数:10
相关论文
共 50 条
  • [31] Study the effect of intermediate and closer stiffener on the behaviour of the cold - formed steel lipped channel section under axial compression
    Sangeetha, P.
    Shanmugapriya, M.
    Manjula, R.
    Vijay, Aparna P.
    Sooraj, K.
    JOURNAL OF MATERIALS AND ENGINEERING STRUCTURES, 2022, 9 (01): : 49 - 60
  • [32] SEARCHING FOR A COMPROMISE SOLUTION IN CROSSSECTION SIZE OPTIMIZATION PROBLEMS OF COLD-FORMED STEEL STRUCTURAL MEMBERS
    Yurchenko, V. V.
    Peleshko, I. D.
    OPIR MATERIALIV I TEORIA SPORUD-STRENGTH OF MATERIALS AND THEORY OF STRUCTURES, 2022, (109): : 72 - 92
  • [33] Section classifications for cold-formed channel steel
    Maduliat, Soheila
    Mendis, Priyan
    Tuan Duc Ngo
    PROCEEDINGS OF THE INSTITUTION OF CIVIL ENGINEERS-STRUCTURES AND BUILDINGS, 2014, 167 (07) : 426 - 435
  • [34] Nonlinear distortional-buckling strength estimation of cold-formed thin-walled steel members with lipped channel section
    Department of Building Engineering, Tongji University, Shanghai
    200092, China
    不详
    330099, China
    Zhongnan Daxue Xuebao (Ziran Kexue Ban), 8 (3067-3074):
  • [35] SIZE OPTIMIZATION OF SINGLE EDGE FOLDS FOR COLD-FORMED STRUCTURAL MEMBERS
    Bilyk, S. I.
    Yurchenko, V. V.
    OPIR MATERIALIV I TEORIA SPORUD-STRENGTH OF MATERIALS AND THEORY OF STRUCTURES, 2020, (105): : 73 - 86
  • [36] Bifurcation analysis of cold-formed steel compression members
    Young, B
    PROCEEDINGS OF THE SEVENTH INTERNATIONAL SYMPOSIUM ON STRUCTURAL ENGINEERING FOR YOUNG EXPERTS, VOLS 1 AND 2, 2002, : 54 - 59
  • [37] Numerical and Theoretical Studies on Cold-Formed Steel Unlipped Channels Subjected to Axial Compression
    Ananthi, G. Beulah Gnana
    Palani, G. S.
    Iyer, Nagesh. R.
    LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2015, 12 (01): : 1 - 17
  • [38] Experiment and design of cold-formed steel equal-leg lipped angle under axial compression
    Yao, Xingyou
    Ruan, Chuhang
    Liu, Yafei
    Liu, Yilin
    Chen, Hou
    Guo, Yanli
    Zeng, Kaihua
    RESULTS IN ENGINEERING, 2024, 23
  • [39] Numerical studies on the behaviour of intermediate length cold formed steel lipped channel compression members
    Marimuthu, V.
    Saravanan, M.
    Prabha, P.
    Sabareshwaran, S.
    Arul Jayachandran, S.
    Journal of Structural Engineering (India), 2012, 39 (01): : 15 - 19
  • [40] Controlling Measure for Distortional Buckling of Cold-formed Thin-walled Steel Lipped Channel Members
    Yao, Xingyou
    Yin, Jiawen
    Hu, Pengwen
    Song, Xiaoqing
    Li, Xiao
    6TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND CIVIL ENGINEERING, 2020, 455