Cross-Section Size Optimization of Cold-Formed Steel Lipped Channel Structural Members Subjected to Axial Compression

被引：0
|
作者：
Yurchenko, Vitalina [1 ]
Perelmuter, Anatoly [2 ]
Peleshko, Ivan [3 ]
机构：
[1] Kyiv Natl Univ Civil Engn & Architecture, Dept Civil Engn, Chair Steel & Timber Struct, 31 Povitroflotsky Av, UA-03680 Kiev, Ukraine
[2] SCAD Soft Ltd, 3A Osvity Str,Of 2, UA-03037 Kiev, Ukraine
[3] Lviv Polytech Natl Univ, Dept Bldg Prod, Inst Civil Engn & Bldg Syst, 6 Karpinskoho St,Bldg 2, UA-79013 Lvov, Ukraine
来源：
CIVIL AND ENVIRONMENTAL ENGINEERING | 2022年 / 18卷 / 02期
关键词：
Cold-formed steel; Buckling resistance; Torsional-flexural buckling; Parametric optimization; Gradient-based methods; SHAPE OPTIMIZATION; BEAMS; COLUMNS; DESIGN;
D O I：
10.2478/cee-2022-0044
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
A parametric optimization problem of cross-sectional sizes for cold-formed steel lipped channel structural members subjected to axial compression has been considered by the paper. An optimization problem is formulated to define optimum cross-sectional sizes of cold-formed structural member taking into account post-buckling behavior and structural requirements when stripe width, profile thickness and profile type are constant and specified in advance. Maximization of the load-carrying capacity of the cold-formed structural member has been assumed as purpose function. As optimization results cold-formed steel lipped channels with optimum dimensions have been obtained. Steel lipped channels structural members with the optimum cross-sectional dimensions have higher load-carrying capacities at the same material consumption (stripe width) comparing with the ones proposed by the manufacturer when the material consumption.
引用
收藏
页码：472 / 481
页数：10
相关论文
共 50 条
  • [21] Cross section distortion due to cutting of cold-formed steel lipped C-section
    Wang, X. P.
    Lam, S. S. E.
    Chung, K. F.
    THIN-WALLED STRUCTURES, 2006, 44 (03) : 271 - 280
  • [22] Fire design proposal for members with cold-formed lipped channel and sigma sections under compression
    Arrais, Flávio
    Lopes, Nuno
    Real, Paulo Vila
    ce/papers, 2021, 4 (2-4) : 1447 - 1456
  • [23] Experimental study on distortional buckling of high strength cold-formed steel lipped channel columns under axial compression
    Xi'an University of Architecture and Technology, Xi'an 710055, China
    不详
    不详
    Jianzhu Jiegou Xuebao, 2006, 3 (10-17):
  • [24] Distortional buckling behavior and design method of cold-formed steel lipped channel with rectangular holes under axial compression
    Guo, Yanli
    Yao, Xingyou
    MATHEMATICAL BIOSCIENCES AND ENGINEERING, 2021, 18 (05) : 6239 - 6261
  • [25] Effect of corrosion on the buckling behaviour of cold-formed steel channel section columns under axial compression
    Nie, Biao
    Xu, Shanhua
    Chen, Huapeng
    Wang, Youde
    ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2023, 23 (02)
  • [26] Overall stability of cold-formed steel lipped channel axially compressed members with baften plates
    Sun, Defa
    ADVANCES IN STRUCTURAL ENGINEERING, PTS 1-3, 2011, 94-96 : 953 - 957
  • [27] Structural behaviour of cold-formed cut-curved channel steel section under compression
    Sani, Mohd Syahrul Hisyam Mohd
    Muftah, Fadhluhartini
    Tan, Cher Siang
    Tahir, Mahmood Md
    CIVIL ENGINEERING INNOVATION FOR A SUSTAINABLE, 2015, 125 : 1008 - 1014
  • [28] Cold-formed steel lipped channel columns at elevated temperatures
    Chen, Ju
    Young, Ben
    ENGINEERING STRUCTURES, 2007, 29 (10) : 2445 - 2456
  • [29] Buckling behaviour of cold-formed steel sigma and lipped channel beam-column members
    Ozturk, Ferhan
    Mojtabaei, Seyed Mohammad
    Senturk, Mehmet
    Pul, Selim
    Hajirasouliha, Iman
    THIN-WALLED STRUCTURES, 2022, 173
  • [30] Laser-based cross-section measurement of cold-formed steel members: Model reconstruction and application
    Zhao, Xi
    Tootkaboni, Mazdak
    Schafer, Benjamin W.
    THIN-WALLED STRUCTURES, 2017, 120 : 70 - 80
12345