Influence of Rotational Speed in the Friction Surfacing of Titanium Grade 1 on Ti-6Al-4V

被引：0
|
作者：
do Vale, Natalia Lopes [1 ]
Fitseva, Viktoria [2 ]
Hanke, Stefanie [2 ]
Urtiga Filho, Severino Leopoldino [1 ]
dos Santos, Jorge Fernandez [2 ]
机构：
[1] Univ Fed Pernambuco, Programa Posgrad Engn Mecan, Recife, PE, Brazil
[2] Helmholtz Zentrum Geesthacht GmbH, Inst Mat Res, Mat Mech, Solid State Joining Proc WMP, Geesthacht, Germany
来源：
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS | 2017年 / 20卷
关键词：
Friction Surfacing; Titanium; Coating Geometry; Microstructure; TOOL STEEL H13; PROCESS PARAMETERS; COATINGS; EVOLUTION;
D O I：
10.1590/1980-5373-MR-2016-1011
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Titanium Grade 1 was deposited on Ti-6Al-4V, 2 mm thickness, by Friction Surfacing. The process parameters were rotational speed, deposition speed and consumption rate. Only the rotational speed was varied in order to evaluate the influence of this parameter on the coatings generated. The applicability of the process has been described for a large number of materials, although the depositions of titanium alloys are still not widely studied. The objective is to investigate the effects of the rotational speed on the coatings' geometry and microstructural evolution. This investigation has shown that Titanium Grade 1 coatings can be deposited onto a Ti-6Al-4V by Friction Surfacing depending on the rotational speed. The coatings' surface homogeneity was influenced by the rotational speed, being inhomogeneous for the lowest speed. The coatings' thickness and width increased with enhancing this speed. The heat affected zone in the substrate corresponded to the complete thickness under the depositions.
引用
收藏
页码：830 / 835
页数：6
相关论文
共 50 条
  • [41] Friction welding of conventional Ti-6Al-4V alloy with a Ti-6Al-4V based metal matrix composite reinforced by TiC
    Prikhodko, Sergey, V
    Savvakin, Dmytro G.
    Markovsky, Pavlo E.
    Stasuk, Olexander O.
    Penney, James
    Enzinger, Norbert
    Gaskill, Michael
    Deley, Frank
    WELDING IN THE WORLD, 2021, 65 (03) : 415 - 428
  • [42] Influence of hydrogen contents of Ti-6Al-4V alloy on friction and wear mechanism between titanium alloy and cemented carbide
    1600, Trans Tech Publications Ltd (584):
  • [43] Amelioration of the tribological behaviour of carbon/Ti-6Al-4V and graphite/Ti-6Al-4V couples by plasma nitriding of the titanium alloy
    Sylvestre, M.
    Zaidi, H.
    Riviere, J. P.
    Eyidi, D.
    Doyen, F.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2010, 224 (J9) : 979 - 988
  • [44] SALT BATH NITRIDING OF CP TITANIUM GRADE-2 AND TI-6AL-4V GRADE-5
    Deepak, J. R.
    Raja, V. K. Bupesh
    Kumar, K. Arun
    Radhakrishnan, Varun H.
    Thomas, Sonu Skariah
    FRONTIERS IN AUTOMOBILE AND MECHANICAL ENGINEERING, 2017, 197
  • [45] Genesis of Microstructures in Friction Stir Welding of Ti-6Al-4V
    Jacques Tchein, Gnofam
    Jacquin, Dimitri
    Coupard, Dominique
    Lacoste, Eric
    Girot Mata, Franck
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (06): : 2113 - 2123
  • [46] Microstructural evolution in Ti-6Al-4V friction stir welds
    Ramirez, AJ
    Juhas, MC
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 2999 - 3004
  • [47] Texture of friction stir welded Ti-6Al-4V alloy
    Zhou, Li
    Liu, Hui-jie
    Wu, Lin-zhi
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2014, 24 (02) : 368 - 372
  • [48] Genesis of Microstructures in Friction Stir Welding of Ti-6Al-4V
    Gnofam Jacques Tchein
    Dimitri Jacquin
    Dominique Coupard
    Eric Lacoste
    Franck Girot Mata
    Metallurgical and Materials Transactions A, 2018, 49 : 2113 - 2123
  • [49] Friction welding of electron beam melted Ti-6Al-4V
    Qin, P. T.
    Damodaram, R.
    Maity, T.
    Zhang, W. W.
    Yang, C.
    Wang, Z.
    Prashanth, K. G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 761
  • [50] Texture development in Ti-6Al-4V linear friction welds
    Karadge, M.
    Preuss, M.
    Lovell, C.
    Withers, P. J.
    Bray, S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 459 (1-2): : 182 - 191
12345