Research on Optimal Cutting Parameters of High-Speed Machining Based on Taguchi Method

被引：0
|
作者：
Tang, Zhonglin [1 ]
Liu, Hongbin [2 ]
机构：
[1] Kunming Univ Sci & Technol, Room 216,Unit B,Build 1,Lianhua Campus, Kunming City 650093, Yunnan Province, Peoples R China
[2] Kunming Univ Sci & Technol, Inst Mech & Elect Engn, Kunming City 650093, Yunnan Province, Peoples R China
来源：
MEMS, NANO AND SMART SYSTEMS, PTS 1-6 | 2012年 / 403-408卷
关键词：
High-Speed Machining; Taguchi method; surface roughness; optimal cutting parameters;
D O I：
10.4028/www.scientific.net/AMR.403-408.732
中图分类号：
TP18 [人工智能理论];
学科分类号：
081104 ; 0812 ; 0835 ; 1405 ;
摘要：
In order to find optimal cutting parameters of carbon steel C45, the optimizing experiment of the cutting parameters in High-Speed Machining based on Taguchi method is presented in this paper. High-Speed milling experiments were designed with high-speed machining tool and surface roughness tester as the equipment. The cutting speed, the feed per tooth and the cutting depth were selected as the cutting parameters while the surface roughness was taken as the criterion. The mean surface roughness and SNR of every factor at different levels was obtained. The effects of these parameters on the surface roughness have been researched by means of the analysis of variance, and then the optimal cutting parameters were found.
引用
收藏
页码：732 / +
页数：2
相关论文
共 50 条
  • [41] High-speed machining
    Tlusty, J.
    CIRP Annals - Manufacturing Technology, 1993, 42 (02) : 733 - 738
  • [42] HIGH-SPEED MACHINING
    KASABIAN, J
    MACHINE DESIGN, 1972, 44 (31) : 68 - 72
  • [43] Research on Thermodynamic Characteristics in High-Speed Machining System
    Wan, Y.
    Liu, Z. Q.
    Ai, X.
    Wu, Z. X.
    HIGH SPEED MACHINING, 2011, 188 : 21 - +
  • [44] Cutting force regulation in high-speed CNC machining of corner zones
    Wang, D
    Loftus, M
    ADVANCES IN MANUFACTURING TECHNOLOGY - XVII, 2003, : 41 - 46
  • [45] HIGH-SPEED FILMS OF INCIPIENT CUTTING PROCESS IN MACHINING AT CONVENTIONAL SPEEDS
    THE, JHL
    JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1977, 99 (01): : 263 - 268
  • [46] HIGH-SPEED FILMS OF INCIPIENT CUTTING PROCESS IN MACHINING AT CONVENTIONAL SPEEDS
    THE, JHL
    MECHANICAL ENGINEERING, 1977, 99 (07) : 99 - 99
  • [47] Transformation of Cutting Burr/Fracture in High-Speed Machining Al Alloy
    Shen, Q. X.
    Wang, G. C.
    Zhu, Y. M.
    Qu, H. J.
    SURFACE FINISHING TECHNOLOGY AND SURFACE ENGINEERING, 2008, 53-54 : 101 - 107
  • [48] Chip geometries during high-speed machining for orthogonal cutting conditions
    Sutter, G
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2005, 45 (06): : 719 - 726
  • [49] COATED CUTTING TOOLS - A STUDY OF WEAR MECHANISMS IN HIGH-SPEED MACHINING
    CHUBB, JP
    BILLINGHAM, J
    WEAR, 1980, 61 (02) : 283 - 293
  • [50] Performance of Multilayered Nanocoated Cutting Tools in High-Speed Machining: A Review
    Ganeshkumar, S.
    Venkatesh, S.
    Paranthaman, P.
    Arulmurugan, R.
    Arunprakash, J.
    Manickam, M.
    Venkatesh, S.
    Rajendiran, G.
    INTERNATIONAL JOURNAL OF PHOTOENERGY, 2022, 2022
12345