Research on Optimal Cutting Parameters of High-Speed Machining Based on Taguchi Method

被引：0
|
作者：
Tang, Zhonglin [1 ]
Liu, Hongbin [2 ]
机构：
[1] Kunming Univ Sci & Technol, Room 216,Unit B,Build 1,Lianhua Campus, Kunming City 650093, Yunnan Province, Peoples R China
[2] Kunming Univ Sci & Technol, Inst Mech & Elect Engn, Kunming City 650093, Yunnan Province, Peoples R China
来源：
MEMS, NANO AND SMART SYSTEMS, PTS 1-6 | 2012年 / 403-408卷
关键词：
High-Speed Machining; Taguchi method; surface roughness; optimal cutting parameters;
D O I：
10.4028/www.scientific.net/AMR.403-408.732
中图分类号：
TP18 [人工智能理论];
学科分类号：
081104 ; 0812 ; 0835 ; 1405 ;
摘要：
In order to find optimal cutting parameters of carbon steel C45, the optimizing experiment of the cutting parameters in High-Speed Machining based on Taguchi method is presented in this paper. High-Speed milling experiments were designed with high-speed machining tool and surface roughness tester as the equipment. The cutting speed, the feed per tooth and the cutting depth were selected as the cutting parameters while the surface roughness was taken as the criterion. The mean surface roughness and SNR of every factor at different levels was obtained. The effects of these parameters on the surface roughness have been researched by means of the analysis of variance, and then the optimal cutting parameters were found.
引用
收藏
页码：732 / +
页数：2
相关论文
共 50 条
  • [21] Increasing of tool resistance to high-speed machining by cutting
    Chernobay Sergey P.
    广东有色金属学报, 2005, (Z1) : 638 - 638
  • [22] The assessment of cutting temperature measurements in high-speed machining
    Wan, Y
    Tang, ZT
    Liu, ZQ
    Ai, X
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY, 2004, 471-472 : 162 - 166
  • [23] Formation and Control of the Cutting Vibration in High-Speed Machining
    Chen, Jian
    Song, Zhipeng
    Wang, Guicheng
    Shen, Chungen
    HIGH SPEED MACHINING V, 2012, 723 : 62 - 66
  • [24] Stability-based selection of cutting parameters to increase material removal rate in high-speed machining process
    Cao, Hongrui
    Zhou, Kai
    Chen, Xuefeng
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2016, 230 (02) : 227 - 240
  • [25] The Effect of Surface Roughness of End-Mills on Optimal Cutting Performance for High-Speed Machining
    Chen, Chi-Hsiang
    Wang, Yung-Cheng
    Lee, Bean-Yin
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2013, 59 (02): : 124 - 134
  • [26] Ceramic cutting materials and CBN cutting tools for high-speed and hard machining
    Schneider, J
    PEOPLE AND PROCESSES, 2000, 1536 : 159 - 182
  • [27] Research of High-Speed Machining With Disk Cutters
    Markov, Andrey
    Andreev, Mikhail
    Shityuk, Aleksey
    Sczygiol, Norbert
    X INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE INNOVATIONS IN MECHANICAL ENGINEERING (ISPCIME-2019), 2019, 297
  • [28] Improving Sustainability Index of Grey Cast Iron Finish Cutting Through High-Speed Dry Turning and Cutting Parameters Optimization Using Taguchi-Based Bayesian Method
    Jonny Herwan
    Takashi Misaka
    Seisuke Kano
    Hiroyuki Sawada
    Yoshiyuki Furukawa
    Oleg Ryabov
    International Journal of Precision Engineering and Manufacturing-Green Technology, 2023, 10 : 729 - 745
  • [29] Improving Sustainability Index of Grey Cast Iron Finish Cutting Through High-Speed Dry Turning and Cutting Parameters Optimization Using Taguchi-Based Bayesian Method
    Herwan, Jonny
    Misaka, Takashi
    Kano, Seisuke
    Sawada, Hiroyuki
    Furukawa, Yoshiyuki
    Ryabov, Oleg
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2023, 10 (03) : 729 - 745
  • [30] High-speed cutting machining technology using NC (2)
    Hangkong Zhizao Gongcheng, 3 (14-15):
12345