Change in Wear Behaviour of Ti and Ti6Al4V after Plasma Immersion Ion Implantation

被引：5
|
作者：
Ducherow, Marlen [1 ]
Fleischer, Alexander [1 ]
Maendl, Stephan [1 ]
机构：
[1] Leibniz Inst Oberflachenmodifizierung, D-04318 Leipzig, Germany
来源：
PLASMA PROCESSES AND POLYMERS | 2007年 / 4卷
关键词：
diffusion; PIII; titanium; wear;
D O I：
10.1002/ppap.200731414
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
The influence of the layer thickness and the microstructure of Ti and Ti6Al4V treated with oxygen plasma immersion ion implantation (PIII) on the respective wear rates are investigated. The implantation temperature was varied from 250 up to 550 degrees C at fluences between 6 and 18 x 10 17 at. . cm(-2). The wear tests were performed in a rotating ball-on-disc tribometer with an alumina ball. No difference in the wear rate was observed between Ti and Ti6AlV at higher temperatures, while significant differences were presented at lower temperatures, which were not solely correlated with the layer thickness.
引用
收藏
页码：S602 / S606
页数：5
相关论文
共 50 条
  • [21] Improved the in vitro cell compatibility and apatite formation of porous Ti6Al4V alloy with magnesium by plasma immersion ion implantation
    Zhou, Meng
    Xiong, Pan
    Jia, Zhaojun
    Tan, Ji
    Cheng, Yan
    Liu, Xuanyong
    Cai, Hong
    Zheng, Yufeng
    MATERIALS LETTERS, 2017, 202 : 8 - 11
  • [22] Improvements of the surface properties of Ti6Al4V by plasma based ion implantation at high temperatures
    Silva, G.
    Ueda, M.
    Otani, C.
    Mello, C. B.
    Lepienski, C. M.
    SURFACE & COATINGS TECHNOLOGY, 2010, 204 (18-19): : 3018 - 3021
  • [23] Temperature elevated N ion implantation of Ti6Al4V alloys using the plasma source
    Zhao, Q.
    Zheng, Y.Z.
    Mo, Z.T.
    Tong, H.H.
    Geng, M.
    Nuclear Science and Techniques/Hewuli, 2001, 12 (03):
  • [24] Wear performance of Ti6Al4V alloy modified by Ag + Ta dual-ion implantation
    Leng, Chongyan
    Zhou, Rong
    Zhang, Xu
    Lu, Dehong
    Liu, Hongxi
    Jinshu Xuebao/ Acta Metallurgica Sinica, 2009, 45 (06): : 764 - 768
  • [25] Oxidation behaviour of plasma surface alloying on Ti6Al4V alloy
    Wei, D. -B.
    Zhang, P. -Z.
    Yao, Z. -J.
    Wei, X. -F.
    Zhou, J. -T.
    Chen, X. -H.
    SURFACE ENGINEERING, 2018, 34 (01) : 14 - 21
  • [26] Wear behaviour of Ti6Al4V alloy blasted with zirconia/hydroxyapatite powders
    Yoruc, A. B. Hazar
    Elkoca, O.
    Yildiz, Harika Eksioglu
    Koyun, Ahmet
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2014, 66 (01) : 106 - 110
  • [27] Effect of Heat Treatment on Wear Behaviour of Duplex Coatings on Ti6Al4V
    Reddy, K. Raghu Ram Mohan
    Sarcar, M. M. M.
    Ramanaiah, N.
    INTERNATIONAL CONFERENCE ON DESIGN AND MANUFACTURING (ICONDM2013), 2013, 64 : 888 - 895
  • [28] Effect of heat treatment on erosive wear behaviour of Ti6Al4V alloy
    Fidan, S.
    Avcu, E.
    Karakulak, E.
    Yamanoglu, R.
    Zeren, M.
    Sinmazcelik, T.
    MATERIALS SCIENCE AND TECHNOLOGY, 2013, 29 (09) : 1088 - 1094
  • [29] Ion beam implantation and plasma immersion ion implantation. Application on nitrided Ti-6Al-4V titanium alloy
    Fabre, A
    Barrallier, L
    Torregrosa, F
    Roux, L
    MICROSCOPY MICROANALYSIS MICROSTRUCTURES, 1997, 8 (06): : 413 - 422
  • [30] Tribological effects of plasma immersion ion implantation heating treatments on Ti-6Al-4V alloy
    Mello, C. B.
    Ueda, M.
    Silva, M. M.
    Reuther, H.
    Pichon, L.
    Lepienski, C. M.
    WEAR, 2009, 267 (5-8) : 867 - 873
12345