Relation between thermal conductivity an d coordination number for fibre-reinforced composite with random distribution of fibres

被引：2

作者：

Darnowski, Piotr ^{[1
]}

Furmanski, Piotr ^{[1
]}

Domanski, Roman ^{[1
]}

机构：

[1] Warsaw Univ Technol, Inst Heat Engn, Novvovviejska 21-25, PL-00665 Warsaw, Poland

来源：

ARCHIVES OF THERMODYNAMICS | 2019年 / 40卷 / 01期

关键词：

Fibre reinforced composite; Random sequential addition; Parallel fibres; Coordination number; Effective thermal conductivity; COMPUTER-SIMULATION; BOUNDS;

D O I：

10.24425/ather.2019.128288

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Transverse effective thermal conductivity of the random unidirectional fibre-reinforced composite was studied. The geometry was circular with random patterns formed using random sequential addition method. Composite geometries for different volume fraction and fibre radii were generated and their effective thermal conductivities (ETC) were calculated. Influence of fibre-matrix conductivity ratio on composite ETC was investigated for high and low values. Patterns were described by a set of coordination numbers (CN) and correlations between ETC arid CN were constructed. The correlations were compared with available formulae presented in literature. Additionally, symmetry of the conductivity tensor for the studied geometries of fibres was analysed.

引用

页码：21 / 48

页数：28

共 50 条

[31] A Lumped Parameter Model of a Fibre-Reinforced Composite Plate with Temperature Dependence Based on Thermal Vibration Measurements
Li, H.
Liang, X. L.
Wang, W. Y.
Xu, Z.
Wen, B. C.
EXPERIMENTAL MECHANICS, 2020, 60 (07) : 949 - 967
[32] Non-destructive evaluation of 3D-printed fibre-reinforced composite materials mechanical behaviour
Forster, Rosanna
Feteira, Antonio
Soulioti, Dimitra
Grammatikos, Sotirios A.
Walsh, Yvonne
Kordatos, Evangelos
THERMOSENSE: THERMAL INFRARED APPLICATIONS XLVI, 2024, 13047
[33] Compression and buckling analysis of 3D printed carbon fibre-reinforced polymer cellular composite structures
Peng, Chenxi
Tran, Phuong
Mouritz, Adrian P.
COMPOSITE STRUCTURES, 2022, 300
[34] Mechanical, tribology, dielectric, thermal conductivity, and water absorption behaviour of Caryota urens woven fibre-reinforced coconut husk biochar toughened wood-plastic composite
Prabhu, P.
Jayabalakrishnan, D.
Balaji, V
Bhaskar, K.
Maridurai, T.
Prakash, V. R. Arun
BIOMASS CONVERSION AND BIOREFINERY, 2024, 14 (01) : 109 - 116
[35] Mechanical, tribology, dielectric, thermal conductivity, and water absorption behaviour of Caryota urens woven fibre-reinforced coconut husk biochar toughened wood-plastic composite
P. Prabhu
D. Jayabalakrishnan
V. Balaji
K. Bhaskar
T. Maridurai
V. R. Arun Prakash
Biomass Conversion and Biorefinery, 2024, 14 : 109 - 116
[36] Influence of silicious rock dust on mechanical, thermal and flammability behaviour of Himalayan nettle fibre-reinforced vinyl ester composite
Anbuchezian, A.
Pungaiah, S. Suresh
Muthukumaran, R.
Nithya, M.
POLYMER BULLETIN, 2024, 81 (18) : 16949 - 16964
[37] Thermal buckling analysis of skew fibre-reinforced composite and sandwich plates using shear deformable finite element models
Kant, T
Babu, CS
COMPOSITE STRUCTURES, 2000, 49 (01) : 77 - 85
[38] Experimental assessment of damage-thermal diffusivity relationship in unidirectional fibre-reinforced composite under axial tensile test
El Yagoubi, Jalal
Lamon, Jacques
Batsale, Jean-Christophe
Le Flem, Marion
ACTA MATERIALIA, 2019, 173 : 302 - 312
[39] Random fatigue life prediction of carbon fibre-reinforced composite laminate based on hybrid time-frequency domain method
Zhou, Song
Sun, Yi
Guo, Licheng
ADVANCED COMPOSITE MATERIALS, 2017, 26 (02) : 181 - 195
[40] Tensile and flexural properties of sisal fibre reinforced epoxy composite: A comparison between unidirectional and mat form of fibres
Gupta, M. K.
Srivastava, R. K.
INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 2434 - 2439

← 1 2 3 4 5 →