Relation between thermal conductivity an d coordination number for fibre-reinforced composite with random distribution of fibres

被引：2
|
作者：
Darnowski, Piotr [1 ]
Furmanski, Piotr [1 ]
Domanski, Roman [1 ]
机构：
[1] Warsaw Univ Technol, Inst Heat Engn, Novvovviejska 21-25, PL-00665 Warsaw, Poland
来源：
ARCHIVES OF THERMODYNAMICS | 2019年 / 40卷 / 01期
关键词：
Fibre reinforced composite; Random sequential addition; Parallel fibres; Coordination number; Effective thermal conductivity; COMPUTER-SIMULATION; BOUNDS;
D O I：
10.24425/ather.2019.128288
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Transverse effective thermal conductivity of the random unidirectional fibre-reinforced composite was studied. The geometry was circular with random patterns formed using random sequential addition method. Composite geometries for different volume fraction and fibre radii were generated and their effective thermal conductivities (ETC) were calculated. Influence of fibre-matrix conductivity ratio on composite ETC was investigated for high and low values. Patterns were described by a set of coordination numbers (CN) and correlations between ETC arid CN were constructed. The correlations were compared with available formulae presented in literature. Additionally, symmetry of the conductivity tensor for the studied geometries of fibres was analysed.
引用
收藏
页码：21 / 48
页数：28
相关论文
共 50 条
  • [21] Thermal Properties of Woven Kenaf/Carbon Fibre-Reinforced Epoxy Hybrid Composite Panels
    Aisyah, H. A.
    Paridah, M. T.
    Sapuan, S. M.
    Khalina, A.
    Berkalp, O. B.
    Lee, S. H.
    Lee, C. H.
    Nurazzi, N. M.
    Ramli, N.
    Wahab, M. S.
    Ilyas, R. A.
    INTERNATIONAL JOURNAL OF POLYMER SCIENCE, 2019, 2019
  • [22] The shear bond strength of bidirectional and random-oriented fibre-reinforced composite to tooth structure
    Tezvergil, A
    Lassila, LVJ
    Vallittu, P
    JOURNAL OF DENTISTRY, 2005, 33 (06) : 509 - 516
  • [23] Study of Mechanical Properties and Thermal Conductivity of Carbon and Basalt Fibre-Reinforced Hybrid Polymer Composites
    Rao, V. Durga Prasada
    Sarabhayya, N. V. N.
    Balakrishna, A.
    ADVANCES IN UNCONVENTIONAL MACHINING AND COMPOSITES, AIMTDR 2018, 2020, : 725 - 738
  • [24] Analytical study of the load transfer in fibre-reinforced 2D composite materials
    Andrianov, Igor V.
    Danishevs'kyy, Vladyslav V.
    Weichert, Dieter
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2008, 45 (05) : 1217 - 1243
  • [25] Micromechanical FE analysis of UD fibre-reinforced composites with fibres distributed at random over the transverse cross-section
    Wongsto, A
    Li, S
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2005, 36 (09) : 1246 - 1266
  • [26] Push-out tests on small fibres and interfacial properties of a fibre-reinforced ceramic matrix composite (SiCf/SiC)
    Moreno, JMC
    Elizalde, MR
    LaraCurzio, E
    CMMC 96 - PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON CERAMIC AND METAL MATRIX COMPOSITES, PTS 1 AND 2, 1997, 127-3 : 617 - 622
  • [27] SOME COMPARISONS BETWEEN FIBRE-REINFORCED AND CONTINUOUS SKELETON TUNGSTEN-COPPER COMPOSITE MATERIALS
    KROCK, RH
    JOURNAL OF METALS, 1965, 17 (09): : 1028 - &
  • [28] Studies on the mechanical and thermal stability of Calotropis gigantea fibre-reinforced bran nano particulates epoxy composite
    Raja, Thandavamoorthy
    Devarajan, Yuvarajan
    Thanappan, Subash
    SCIENTIFIC REPORTS, 2023, 13 (01)
  • [29] Studies on the mechanical and thermal stability of Calotropis gigantea fibre-reinforced bran nano particulates epoxy composite
    Thandavamoorthy Raja
    Yuvarajan Devarajan
    Subash Thanappan
    Scientific Reports, 13
  • [30] A Lumped Parameter Model of a Fibre-Reinforced Composite Plate with Temperature Dependence Based on Thermal Vibration Measurements
    H. Li
    X.L. Liang
    W.Y. Wang
    Z. Xu
    B.C. Wen
    Experimental Mechanics, 2020, 60 : 949 - 967
12345