Effects of salt spray on the mechanical properties of aluminum-epoxy adhesive joints

被引:21
|
作者
Hua, Dandan [1 ]
Lin, Jianping [1 ]
Zhang, Baowen [1 ]
机构
[1] Tongji Univ, Coll Mech Engn, Shanghai 200092, Peoples R China
关键词
single-lap adhesively bonding joints; corrosion; residual strength; DURABILITY; STRENGTH; WATER;
D O I
10.1080/01694243.2012.747730
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The aluminum bonding joints were aged in salt spray fog for various aging time from 0 to 1200h. Uniaxial tensile tests were conducted for the joints to obtain the residual strength of the joints. The test results showed that the residual strength of the joints increases firstly and then decreases with the aging time in salt spray environment. The mechanism of the spray fog environment effect on the joint residual strength is analyzed by infrared spectral analysis and energy dispersive spectroscopy experiments. It is suggested the effect of aging time in the salt spray fog on the joint residual strength is the competing result of two mechanisms. One positive mechanism is that the adhesive expands after absorbing water in the early aging and reaches its saturation after a certain time, which leads to releasing of the internal stress in joints and consequently increases the joint residual strength. Another negative mechanism is that the water molecules permeating into the adhesive when aged in salt spray fog leads to the plasticization of the adhesive, which results in decreasing the joint residual strength as the aging time increases.
引用
收藏
页码:1580 / 1589
页数:10
相关论文
共 50 条
  • [31] Synergistic Improvement of Flame Retardancy and Mechanical Properties of Epoxy/Benzoxazine/Aluminum Trihydrate Adhesive Composites
    Sung, Kyung-Soo
    Kim, Namil
    POLYMERS, 2023, 15 (11)
  • [32] Fracture and Mechanical Behavior of Nanoclay Reinforced Epoxy Adhesive in Bonded Joints
    Khalili, S. M. R.
    Tavakolian, M.
    Khalili, S.
    Farsani, R. Eslami
    PROCEEDINGS OF 2010 INTERNATIONAL CONFERENCE ON CHEMICAL ENGINEERING AND APPLICATIONS, 2010, : 187 - 191
  • [33] Improvement of mechanical properties in epoxy adhesive joints of Al alloy via carbon nanotubes from flame
    Zhao, Pu
    Xiong, Xuhai
    Ren, Rong
    Zhang, Zhongbao
    Cui, Xu
    Ji, Shude
    MATERIALS RESEARCH EXPRESS, 2019, 6 (08)
  • [34] Effects of Temperature and Loading Rate on the Mechanical Properties of a High Temperature Epoxy Adhesive
    Banea, M. D.
    de Sousa, F. S. M.
    da Silva, L. F. M.
    Campilho, R. D. S. G.
    de Bastos Pereira, A. M.
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2011, 25 (18) : 2461 - 2474
  • [35] Analysis of Fracture in Aluminum Joints Bonded with a Bi-Component Epoxy Adhesive
    Alfano, M.
    Furgiuele, F.
    Pagnotta, L.
    Paulino, G. H.
    JOURNAL OF TESTING AND EVALUATION, 2011, 39 (02) : 296 - 303
  • [36] THE EFFECT OF A MULTICOMPONENT SILANE PRIMER ON THE INTERPHASE STRUCTURE OF ALUMINUM EPOXY ADHESIVE JOINTS
    DILLINGHAM, RG
    BOERIO, FJ
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 1992, 6 (01) : 207 - 225
  • [37] Effects of epoxy resin liquidity on the mechanical properties of aluminum foam sandwich
    Yan, Chang
    Song, Xuding
    Jing, Chuanhe
    Feng, Shuo
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2018, 32 (06) : 673 - 691
  • [38] The Influence of Adhesive Compounds Biochemical Modification on the Mechanical Properties of Adhesive Joints
    Rudawska, Anna
    Haniecka, Izabela
    Jaszek, Magdalena
    Stefaniuk, Dawid
    POLYMERS, 2018, 10 (04)
  • [39] Identification of mechanical properties of adhesive joints using ANN
    Pazand, Kamran
    Nobari, A. S.
    AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY, 2017, 89 (06): : 928 - 935
  • [40] Dynamic mechanical properties of very thin adhesive joints
    Krogh, Ludovic
    Schawe, Juergen E. K.
    Possart, Wulff
    JOURNAL OF APPLIED POLYMER SCIENCE, 2015, 132 (24)