Effects of salt spray on the mechanical properties of aluminum-epoxy adhesive joints

被引:21
|
作者
Hua, Dandan [1 ]
Lin, Jianping [1 ]
Zhang, Baowen [1 ]
机构
[1] Tongji Univ, Coll Mech Engn, Shanghai 200092, Peoples R China
关键词
single-lap adhesively bonding joints; corrosion; residual strength; DURABILITY; STRENGTH; WATER;
D O I
10.1080/01694243.2012.747730
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The aluminum bonding joints were aged in salt spray fog for various aging time from 0 to 1200h. Uniaxial tensile tests were conducted for the joints to obtain the residual strength of the joints. The test results showed that the residual strength of the joints increases firstly and then decreases with the aging time in salt spray environment. The mechanism of the spray fog environment effect on the joint residual strength is analyzed by infrared spectral analysis and energy dispersive spectroscopy experiments. It is suggested the effect of aging time in the salt spray fog on the joint residual strength is the competing result of two mechanisms. One positive mechanism is that the adhesive expands after absorbing water in the early aging and reaches its saturation after a certain time, which leads to releasing of the internal stress in joints and consequently increases the joint residual strength. Another negative mechanism is that the water molecules permeating into the adhesive when aged in salt spray fog leads to the plasticization of the adhesive, which results in decreasing the joint residual strength as the aging time increases.
引用
收藏
页码:1580 / 1589
页数:10
相关论文
共 50 条
  • [21] Effect of reinforcements at different scales on mechanical properties of epoxy adhesives and adhesive joints: a review
    Giv, Ali Nemati
    Ayatollahi, Majid R.
    Ghaffari, S. Hengameh
    da Silva, Lucas F. M.
    JOURNAL OF ADHESION, 2018, 94 (13): : 1082 - 1121
  • [22] EFFECT OF SALT SPRAY CYCLIC CORROSION ON THE MECHANICAL AND REVERSIBILITY PERFORMANCE OF MIXED MATERIAL JOINTS WITH MODIFIED ADHESIVE
    Burczyk, Matthew
    Nassar, Sayed A.
    PROCEEDINGS OF ASME 2022 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2022, VOL 2A, 2022,
  • [23] Effects of hygrothermal aging on the mechanical properties of aluminum alloy adhesive joints for high-speed train applications
    Tan Wei
    Na Jingxin
    Mu Wenlong
    Wang Guangbin
    Feng Yao
    JOURNAL OF ADHESION, 2022, 98 (03): : 227 - 256
  • [24] Effects of Sc microalloying on mechanical properties and corrosion resistance of FSW joints of spray formed 7055 aluminum alloy
    Lu, Zhengping
    Jiang, Yunze
    Xu, Junhua
    Yu, Lihua
    Zhang, Hao
    MATERIALS CHARACTERIZATION, 2025, 220
  • [25] INTERFACIAL AND NEAR INTERFACIAL CURING REACTIONS IN EPOXY ALUMINUM ADHESIVE JOINTS
    DILLINGHAM, RG
    BOERIO, FJ
    SURFACE AND INTERFACE ANALYSIS, 1987, 10 (2-3) : 170 - 171
  • [26] Curing effects on viscosity and mechanical properties of a commercial epoxy resin adhesive
    Lapique, F
    Redford, K
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2002, 22 (04) : 337 - 346
  • [27] Curing effects on viscosity and mechanical properties of a commercial epoxy resin adhesive
    Lapique, F. (fabrice.lapique@sintef.no), 1600, Elsevier Ltd (22):
  • [28] Mechanical Behavior of Particulate Aluminum-Epoxy Hybrid Foams Based on Cold-Setting Polymers
    Weise, Joerg
    Queiroz Barbosa, Andre Felipe
    Yezerska, Olga
    Lehmhus, Dirk
    Baumeister, Joachim
    ADVANCED ENGINEERING MATERIALS, 2017, 19 (10)
  • [29] Mechanical properties of a reversible adhesive used to separate adhesive joints
    Ciardiello R.
    Material Design and Processing Communications, 2021, 3 (03):
  • [30] The mechanical performance of the laminated aluminum-epoxy/glass fiber composites containing halloysite nanotubes: An experimental investigation
    Abd El-baky, Marwa A.
    Attia, Mohamed A.
    JOURNAL OF INDUSTRIAL TEXTILES, 2022, 51 (5_SUPPL) : 8690S - 8737S