Development of a Magnetic-shield Fabric Consisted of Permalloy Wire

被引：0
|
作者：
Myoen, Yoshiki [1 ]
Baba, Tetsuro [1 ]
Kano, Takeshi [1 ]
Ohshima, Tamiko [2 ]
Takeuchi, Yukio [3 ]
Aoqui, Shin-ichi [4 ]
机构：
[1] VIC Int Co Ltd, Tech Dept, Tokyo, Japan
[2] Sasebo Coll, Natl Inst Technol, Dept Elect & Electron Engn, Nagasaki, Japan
[3] VIC Int Co Ltd, Tokyo, Japan
[4] Sojo Univ, Dept Comp & Informat Sci, Kumamoto, Japan
来源：
2017 INTERNATIONAL CONFERENCE ON ELECTROMAGNETIC DEVICES AND PROCESSES IN ENVIRONMENT PROTECTION WITH SEMINAR APPLICATIONS OF SUPERCONDUCTORS (ELMECO & AOS) | 2017年
关键词：
permalloy; wire; magnetic shield; magnetic anneal;
D O I：
暂无
中图分类号：
R318 [生物医学工程];
学科分类号：
0831 ;
摘要：
We developed a magnetic-shield fabric consisted of permalloy wire. One of the application purposes is for magnetic shielding of parts that cannot be covered with permalloy sheets. A permalloy wire is magnetically annealed with effective temperature, that is determined by measuring a residual magnetic field of permalloy wire itself, in order to maximize the magnetic shielding effect. Even if permalloy wire, the magnetic shielding effect was obtained by magnetic anneal.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] LARGE VESSELS OF HIGH-TC BI-PB-SR-CA-CU-O SUPERCONDUCTOR FOR MAGNETIC-SHIELD
    HOSHINO, K
    OHTA, H
    SUDOH, E
    KATOH, K
    YAMAZAKI, S
    TAKAHARA, H
    AONO, M
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 1990, 29 (08): : L1435 - L1438
  • [32] Design and current-limiting simulation of magnetic-shield type superconducting fault current limiter with high Tc superconductors
    Kajikawa, K
    Kaiho, K
    Tamada, N
    Onishi, T
    IEEE TRANSACTIONS ON MAGNETICS, 1996, 32 (04) : 2667 - 2670
  • [33] Thermal performance improvement of magnetic-shield superconducting fault current Limiter, by using heat-sink in its structure
    Rajabi, M.
    Mousavi, S. M. G.
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2019, 556 : 30 - 35
  • [34] Detection of magnetic domain wall in a permalloy wire using a semiconductor and ferromagnetic hybrid structure
    Sekine, Yoshiaki
    Akazaki, Tatsushi
    Nitta, Junsaku
    PHYSICS OF SEMICONDUCTORS, PTS A AND B, 2007, 893 : 1291 - +
  • [35] Development of surface micromachined magnetic actuators using electroplated permalloy
    Liu, C
    MECHATRONICS, 1998, 8 (05) : 613 - 633
  • [36] Effects of epoxy coating on anchorage and development of welded wire fabric
    Bartoletti, SJ
    Jirsa, JO
    ACI STRUCTURAL JOURNAL, 1995, 92 (06) : 757 - 764
  • [37] MAGNETIC-SHIELD OF HIGH-TC BI-PB-SR-CA-CU-O SUPERCONDUCTORS AT 77 K FOR SQUID MEASUREMENTS
    HOSHINO, K
    OHTA, H
    SUDOH, E
    KATOH, K
    YAMAZAKI, S
    TAKAYAMA, H
    TAKAHARA, H
    AONO, M
    IEEE TRANSACTIONS ON MAGNETICS, 1991, 27 (02) : 2202 - 2205
  • [38] Process Development of an Electroplated Permalloy Layer on Magnetic Magnesium for Gentelligent™ Products
    Belski, A.
    Wurz, M. C.
    Rissing, L.
    MAGNETIC MATERIALS PROCESSES AND DEVICES 11, 2011, 33 (34): : 93 - 104
  • [39] Characteristic Analysis of Directly Coupled HTS dc-SQUID Magnetometer With Superconducting Film Magnetic-Shield Considering Josephson-Junction Resistance
    Terauchi, Naoya
    Noguchi, So
    Igarashi, Hajime
    Hatsukade, Yoshimi
    Tanaka, Saburo
    IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (02) : 571 - 574
  • [40] Magnetic fabric studies of the Nipissing sill province and Senneterre dykes, Canadian Shield, and implications for emplacement
    Palmer, H. C.
    Ernst, R. E.
    Buchan, K. L.
    CANADIAN JOURNAL OF EARTH SCIENCES, 2007, 44 (04) : 507 - 528
12345