Analysis of microfracture mechanism of titanium alloy by acoustic emission technique

被引：11

作者：

Mashino, S

Mashimo, Y

Horiya, T

Shiwa, M

Kishi, T

机构：

[1] JAPAN RES & DEV CTR MET,MINATO KU,TOKYO 105,JAPAN

[2] JAPAN POWER ENGN & INSPECT CORP,TSURUMI KU,YOKOHAMA,KANAGAWA 230,JAPAN

[3] UNIV TOKYO,RES CTR ADV SCI & TECHNOL,MEGURO KU,TOKYO 153,JAPAN

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1996年 / 213卷 / 1-2期

关键词：

acoustic emission; fracture toughness; microcracks; fracture mode;

D O I：

10.1016/0921-5093(96)10235-5

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Microfracture mechanism in fracture toughness test of Ti-8Al-1Mo-1V alloy was examined by the newly developed AE wave analysis system termed dynamic crack microscopy (DCM). The specimen with acicular alpha microstructure had higher fracture toughness than that with equiaxed alpha microstructure, In the acicular alpha microstructure, there were many AE events corresponding to the generation of microcracks before the final fracture. AE source characterization indicated that in the case of acicular alpha microstructure, many microcracks of 110 similar to 370 mu m were nucleated in mixed mode ahead of the crack lip, and main crack extended by coalescence of these microcracks in shear mode. From these results, fracture toughness was evaluated quantitatively, using ductile fracture criterion, and it was found that the colony size had a significant influence on the fracture toughness of the acicular alpha microstructure.

引用

页码：66 / 70

页数：5

共 50 条

[41] Fatigue crack analysis of ferrite material by acoustic emission technique
Khan, Md T., I
Rashid, A. A.
Hidaka, R.
Hattori, N.
Islam, Md M.
JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES, 2019, 13 (02) : 5074 - 5089
[42] Damage analysis of reinforced concrete buildings by the acoustic emission technique
Carpinteri, A.
Lacidogna, G.
Niccolini, G.
STRUCTURAL CONTROL & HEALTH MONITORING, 2011, 18 (06): : 660 - 673
[43] Study on damage mechanism of pipe using ultrasonic wave and acoustic emission technique
Lee, Jin-Kyung
Lee, Sang-Pill
Lee, Joon-Hyun
PROGRESSES IN FRACTURE AND STRENGTH OF MATERIALS AND STRUCTURES, 1-4, 2007, 353-358 : 2415 - +
[44] Cracking Mechanism of Corroded Reinforced Concrete Column Based on Acoustic Emission Technique
Sun, Bo
Ye, Shenghua
Qiu, Tengfei
Fu, Chuanqing
Wu, Dan
Jin, Xianyu
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2023, 35 (04)
[45] Laser acoustic emission thermal technique (LAETT): A technique for generating acoustic emission in dental composites
Duray, SJ
Lee, SY
Menis, DL
Gilbert, JL
Lautenschlager, EP
Greener, EH
DENTAL MATERIALS, 1996, 12 (01) : 13 - 18
[46] Assessment of grain size and lattice parameters of titanium alloy through electromagnetic emission technique
Chauhan V.S.
Misra A.
International Journal of Microstructure and Materials Properties, 2011, 6 (06) : 486 - 506
[47] ACOUSTIC EMISSION DURING TENSILE DEFORMATION OF SMOOTH AND NOTCHED SPECIMENS OF NEAR ALPHA TITANIUM ALLOY
Kumar, Jalaj
Punnose, Sony
Mukhopadhyay, C. K.
Jayakumar, T.
Kumar, Vikas
RESEARCH IN NONDESTRUCTIVE EVALUATION, 2012, 23 (01) : 17 - 31
[48] Investigating the impact of tool inertia on machinability of a β-titanium alloy using tool deflection and acoustic emission
Iqbal, Asif
Biermann, Dirk
Ali, Hussein M.
Zaini, Juliana
Metzger, Maximilian
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2019, 233 (07) : 1745 - 1760
[49] Stress corrosion damage evolution analysis and mechanism identification for prestressed steel strands using acoustic emission technique
Li, Dongsheng
Tan, Meiling
Zhang, Shuaifang
Ou, Jinping
STRUCTURAL CONTROL & HEALTH MONITORING, 2018, 25 (08):
[50] STUDY OF HIGH-CYCLE FATIGUE BEHAVIOUR OF TITANIUM ALLOY USING ACOUSTIC EMISSION METHOD
Vlasic, Frantisek
Nohal, Libor
Mazal, Pavel
Liskutin, Petr
METAL 2014: 23RD INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2014, : 1423 - 1430

← 1 2 3 4 5 →