Analysis of microfracture mechanism of titanium alloy by acoustic emission technique

被引：11
|
作者：
Mashino, S
Mashimo, Y
Horiya, T
Shiwa, M
Kishi, T
机构：
[1] JAPAN RES & DEV CTR MET,MINATO KU,TOKYO 105,JAPAN
[2] JAPAN POWER ENGN & INSPECT CORP,TSURUMI KU,YOKOHAMA,KANAGAWA 230,JAPAN
[3] UNIV TOKYO,RES CTR ADV SCI & TECHNOL,MEGURO KU,TOKYO 153,JAPAN
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1996年 / 213卷 / 1-2期
关键词：
acoustic emission; fracture toughness; microcracks; fracture mode;
D O I：
10.1016/0921-5093(96)10235-5
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Microfracture mechanism in fracture toughness test of Ti-8Al-1Mo-1V alloy was examined by the newly developed AE wave analysis system termed dynamic crack microscopy (DCM). The specimen with acicular alpha microstructure had higher fracture toughness than that with equiaxed alpha microstructure, In the acicular alpha microstructure, there were many AE events corresponding to the generation of microcracks before the final fracture. AE source characterization indicated that in the case of acicular alpha microstructure, many microcracks of 110 similar to 370 mu m were nucleated in mixed mode ahead of the crack lip, and main crack extended by coalescence of these microcracks in shear mode. From these results, fracture toughness was evaluated quantitatively, using ductile fracture criterion, and it was found that the colony size had a significant influence on the fracture toughness of the acicular alpha microstructure.
引用
收藏
页码：66 / 70
页数：5
相关论文
共 50 条
  • [31] Acoustic emission and microfracture analysis of strain rockbursts in deep granite under varying intermediate principal stresses
    Guo, Guang-tao
    Xu, Ding-Ping
    Wu, Xiao-gang
    Zhu, Jun-xing
    Xu, Huai-sheng
    Liu, Xiu-yang
    MEASUREMENT, 2025, 242
  • [32] Evaluation of the acoustic emission caused by the chip segmentation frequency during machining of titanium alloy
    Schwaer, Daniel
    Gonzalez, German
    Segebade, Eric
    Zanger, Frederik
    Heizmann, Michael
    TM-TECHNISCHES MESSEN, 2020, 87 (11) : 714 - 720
  • [33] Analysis on damage mechanism of PE/PE self-reinforced composite based on acoustic emission technique
    Zhang, Tong-Hua
    Yang, Bi-Ling
    Peng, Yong-Chao
    Yan, Xiong
    Cailiao Gongcheng/Journal of Materials Engineering, 2007, (01): : 56 - 59
  • [34] ACOUSTIC EMISSION IN INTL ALLOY
    BEATTIE, AG
    BULLETIN OF THE AMERICAN PHYSICAL SOCIETY, 1971, 16 (03): : 385 - &
  • [35] Quantification of damage evolution in a 7075 aluminum alloy using an acoustic emission technique
    Lugo, Marcos
    Jordon, J. B.
    Horstemeyer, M. F.
    Tschopp, M. A.
    Harris, J.
    Gokhale, A. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (22-23): : 6708 - 6714
  • [36] Acoustic emission signal analysis of aluminum alloy fatigue crack
    1600, International Frequency Sensor Association, 46 Thorny Vineway, Toronto, ON M2J 4J2, Canada (152):
  • [37] Acoustic emission monitoring and failure mechanism analysis of rolling contact fatigue for Fe-based alloy coating
    Li Guo-lu
    Zhang Zhi-qiang
    Wang Hai-dou
    Xu Bin-shi
    Piao Zhong-yu
    Zhu Li-na
    TRIBOLOGY INTERNATIONAL, 2013, 61 : 129 - 137
  • [38] APPLICATION OF A SIGNAL RECOVERY TECHNIQUE TO ACOUSTIC-EMISSION ANALYSIS
    ESMAIL, E
    GRABEC, I
    ULTRASONICS, 1978, 16 (02) : 87 - 89
  • [39] Experimental analysis of crack evolution in concrete by the acoustic emission technique
    Saliba, J.
    Loukili, A.
    Regoin, J. P.
    Gregoire, D.
    Verdon, L.
    Pijaudier-Cabot, G.
    FRATTURA ED INTEGRITA STRUTTURALE, 2015, (34): : 300 - 308
  • [40] Analysis of acoustic emission signals using wavelet transformation technique
    Rao, S. V. Subba
    Subramanyam, B.
    DEFENCE SCIENCE JOURNAL, 2008, 58 (04) : 559 - 564
12345