Compressive Behavior of Spark Plasma Sintered CNT Reinforced Al2124 and Al6061 Nanocomposites

被引：2
|
作者：
Saheb, Nouari [1 ]
机构：
[1] King Fahd Univ Petr & Minerals, Ctr Excellence Nanotechnol, Dept Mech Engn, Dhahran 31261, Saudi Arabia
来源：
ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3 | 2013年 / 652-654卷
关键词：
Spark plasma sintering; Aluminum Nanocomposites; Compressive strength; CARBON NANOTUBES; COMPOSITES;
D O I：
10.4028/www.scientific.net/AMR.652-654.33
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present study, compressive behavior of CNT reinforced Al2124 and Al6061 nanocomposites was investigated. The powders were sonicated for 30 minutes then ball milled at 200 rpm for 1 hour under argon environment. The ball milled slurry was dried and again was milled under same conditions for 15 min to disperse the agglomerated particles. The prepared powders were spark plasma sintered at 35 MPa and 450 degrees C. Sintered specimens with final dimensions of 6 mm diameter and 12 mm length were used as standard specimens for compression tests carried out at a compression rate of 0.5 mm/min. The effect of CNT addition on the compressive modulus, percentage compression, and compressive strength was investigated.
引用
收藏
页码：33 / +
页数：3
相关论文
共 50 条
  • [41] Enhanced mechanical and wear properties of Al6061 alloy nanocomposite reinforced by CNT-template-grown core–shell CNT/SiC nanotubes
    Sung Chan Yoo
    Byungchul Kang
    Pham Van Trinh
    Doan Dinh Phuong
    Soon Hyung Hong
    Scientific Reports, 10
  • [42] Mechanical characterization of Al6061 reinforced with aloe vera powder and SiC
    Avasarala, Vaishnavi
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 1291 - 1295
  • [43] Study on ageing behaviour of silicon nitride reinforced Al6061 composites
    Mane, Praveen J.
    Kumar, K. L. Vishnu
    12TH GLOBAL CONGRESS ON MANUFACTURING AND MANAGEMENT (GCMM - 2014), 2014, 97 : 642 - 647
  • [44] The Oxidation Behavior of Spark Plasma Sintered Ti-48Al Alloys
    Krishnan, P. S. Sankara Rama
    Davidson, K. P.
    Xu, X.
    Chan, S. W.
    Tsakadze, Z.
    Duchamp, M.
    Ramanujan, R. V.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 34 (6) : 5138 - 5154
  • [45] Mechanical Properties and Tribological Behavior of Al6061–SiC–Gr Self-Lubricating Hybrid Nanocomposites
    I. Manivannan
    S. Ranganathan
    S. Gopalakannan
    S. Suresh
    Transactions of the Indian Institute of Metals, 2018, 71 : 1897 - 1911
  • [46] Investigating Corrosion and Surface Hardness of Al6061 in Machining Fluids with Variable CNT Concentrations
    Okokpujie, Imhade P.
    Nakpoberuo, Dafe O.
    Emojeya, Darlington O.
    Azeez, Temitayo M.
    Tartibu, Lagouge K.
    REVUE DES COMPOSITES ET DES MATERIAUX AVANCES-JOURNAL OF COMPOSITE AND ADVANCED MATERIALS, 2024, 34 (01): : 9 - 18
  • [47] Mechanical and wear properties of SiCp/CNT/Al6061 hybrid metal matrix composites
    Van Trinh, Pham
    Lee, Junho
    Kang, Byungchul
    Minh, Phan Ngoc
    Phuong, Doan Dinh
    Hong, Soon Hyung
    DIAMOND AND RELATED MATERIALS, 2022, 124
  • [48] Densification behaviour of spark plasma sintered multiwall carbon nanotubes reinforced Ti6Al4V nanocomposites
    Okoro, A. M.
    Lephuthing, S. S.
    Machaka, R.
    Awotunde, M. A.
    Olubambi, P. A.
    MATERIALS TODAY-PROCEEDINGS, 2020, 28 : 450 - 454
  • [49] ABRASIVE WEAR BEHAVIOUR OF SiCp-REINFORCED Al2124 ALLOY COMPOSITE BASED ON THE TAGUCHI METHOD
    Sahin, Y.
    Oksuz, K. E.
    JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION, 2013, 19 (04): : 520 - 538
  • [50] A Study on the Aging Behavior of Al6061 Composites Reinforced with Y2O3 and TiC
    Chen, Chun-Liang
    Lin, Chen-Han
    METALS, 2017, 7 (01)
12345