Study on ageing behaviour of silicon nitride reinforced Al6061 composites

被引:6
|
作者
Mane, Praveen J. [1 ]
Kumar, K. L. Vishnu [1 ]
机构
[1] MS Ramaiah Inst Technol, Bangalore 54, Karnataka, India
关键词
Ageing kinetics; precipitation; metal matrix composites; scanning electron microscopy;
D O I
10.1016/j.proeng.2014.12.293
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Aluminium alloy especially 6000 series have the unique property of undergoing ageing or precipitation hardening due to the formation of Mg2Si precipitates in the alloy. The matrix phase of these alloy series when added with reinforcements like Si3N4 undergo enhanced increment in hardness, strength and load bearing capacity due to formation of high dislocation density. In this investigation the ageing behavior of particulate reinforcements of Si3N4 particles in Al6061 metal matrix composite is compared to that of unreinforced Al 6061 base alloy. Both the composite and base alloy were subjected to ageing at solutionizing temperature of 525 degrees C and ageing temperature of 195 degrees C. It was noticed that the precipitation kinetics was accelerated in the composites. This is due to the large difference in values the co-efficient of thermal expansion between the matrix (Al) and reinforcement (Si3N4). This creates preferential nucleation sites for precipitation of 2nd phase particles near the reinforcement-matrix interface. In this work, detailed observation of the microstructure of the composites by optical microscopy, scanning electron microscopy has been carried out to support the study. (C) 2014 The Authors. Published by Elsevier Ltd.
引用
收藏
页码:642 / 647
页数:6
相关论文
共 50 条
  • [1] Tensile, Impact and Fatigue Behaviour of Boron Carbide Reinforced Al6061 Alloy Composites
    Vasanthkumar H.S.
    Kempaiah U.N.
    Nagaral M.
    Revanna K.
    International Journal of Vehicle Structures and Systems, 2022, 14 (04): : 459 - 464
  • [2] Workability Studies on Al6061 Alloy and Al6061 Metal Matrix Composites Reinforced with Silicon Carbide Particles Under Cold Backward Extrusion
    Venkatesh R.
    Niranjan C.A.
    Srinivas S.
    Raghavendra T.
    Journal of The Institution of Engineers (India): Series D, 2023, 104 (1) : 373 - 389
  • [3] Wear Study of Chicken Eggshell-Reinforced Al6061 Matrix Composites
    Dwiwedi, Surendra Kumar
    Srivastava, Ashok Kumar
    Chopkar, Manoj Kumar
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (01) : 73 - 84
  • [4] Wear Study of Chicken Eggshell-Reinforced Al6061 Matrix Composites
    Surendra Kumar Dwiwedi
    Ashok Kumar Srivastava
    Manoj Kumar Chopkar
    Transactions of the Indian Institute of Metals, 2019, 72 : 73 - 84
  • [5] Investigation on wear behaviour of AL6061 amalgam reinforced with carbides
    Vishwas, Doddabommappa Kotrappa
    Chandrappa, Chaldiganahalli Nassappa
    INTERNATIONAL CONFERENCE ON EMERGING TRENDS IN MECHANICAL ENGINEERING (ETIME-2019), 2020, 2236
  • [6] Study of corrosive-erosive wear behaviour of Al6061/albite composites
    Sharma, S. C.
    Krishna, M.
    Murthy, H. N. Narasimha
    Tarachandra, R.
    Satyamoorthy, M.
    Bhattacharyya, D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 425 (1-2): : 305 - 311
  • [7] SYNTHESIS AND CHARACTERIZATION OF TiO2 REINFORCED Al6061 COMPOSITES
    Kumar, G. B. Veeresh
    Gouda, P. S. Shivakumar
    Pramod, R.
    Rao, C. S. P.
    ADVANCED COMPOSITES LETTERS, 2017, 26 (01) : 18 - 23
  • [8] Microstructure and tensile behaviour of B4C particles reinforced Al6061 matrix composites
    Kavitha, T. N.
    Auradi, V.
    Rajesh, G. L.
    Bharath, V.
    Kumar, S. Mahendra
    Nagaral, Madeva
    MATERIALS TODAY-PROCEEDINGS, 2022, 52 : 1436 - 1441
  • [9] Tribolayer Behaviour and Wear of Artificially Aged Al6061 Hybrid Composites
    Shettar, M.
    Hiremath, P.
    Shankar, G.
    Kini, A.
    Sharma, S.
    INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2021, 18 (02) : 8668 - 8676
  • [10] A COMPARATIVE STUDY ON BALLISTIC BEHAVIOUR OF MWCNT / GRAPHENE REINFORCED AL6061 SURFACE COMPOSITES FABRICATED VIA FRICTION STIR PROCESSING
    Magarajan, U.
    Kumar, S. Suresh
    ARCHIVES OF METALLURGY AND MATERIALS, 2023, 68 (02) : 541 - 550