Study on ageing behaviour of silicon nitride reinforced Al6061 composites

被引:6
|
作者
Mane, Praveen J. [1 ]
Kumar, K. L. Vishnu [1 ]
机构
[1] MS Ramaiah Inst Technol, Bangalore 54, Karnataka, India
关键词
Ageing kinetics; precipitation; metal matrix composites; scanning electron microscopy;
D O I
10.1016/j.proeng.2014.12.293
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Aluminium alloy especially 6000 series have the unique property of undergoing ageing or precipitation hardening due to the formation of Mg2Si precipitates in the alloy. The matrix phase of these alloy series when added with reinforcements like Si3N4 undergo enhanced increment in hardness, strength and load bearing capacity due to formation of high dislocation density. In this investigation the ageing behavior of particulate reinforcements of Si3N4 particles in Al6061 metal matrix composite is compared to that of unreinforced Al 6061 base alloy. Both the composite and base alloy were subjected to ageing at solutionizing temperature of 525 degrees C and ageing temperature of 195 degrees C. It was noticed that the precipitation kinetics was accelerated in the composites. This is due to the large difference in values the co-efficient of thermal expansion between the matrix (Al) and reinforcement (Si3N4). This creates preferential nucleation sites for precipitation of 2nd phase particles near the reinforcement-matrix interface. In this work, detailed observation of the microstructure of the composites by optical microscopy, scanning electron microscopy has been carried out to support the study. (C) 2014 The Authors. Published by Elsevier Ltd.
引用
收藏
页码:642 / 647
页数:6
相关论文
共 50 条
  • [21] Effect of SiC reinforcement on the mechanical and tribological behaviour of Al6061 metal matrix composites
    Sachin, D.
    Uday, K. N.
    Rajamurugan, G.
    Krishnasamy, Prabu
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 7082 - 7089
  • [22] Study on wear behaviour of Al6061 MMC with nano-MoC
    Felix Prabhu F.
    Prema Kumar K.
    Shanmugam A.
    Kumar M.
    Senthil T.S.
    Arockia Dhanraj J.
    Materials Today: Proceedings, 2022, 69 : 1154 - 1158
  • [23] Characterization, Prediction, and Optimization of Dry Sliding Wear Behaviour of Al6061/WC Composites
    Rao, Thella Babu
    Ponugoti, Gangadhara Rao
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (01) : 159 - 178
  • [24] Influence of silicon carbide and porcelain on tribological performance of Al6061 based hybrid composites
    Anand, Vishesh Kumar
    Aherwar, Amit
    Mia, Mozammel
    Elfakir, Omer
    Wang, Liliang
    TRIBOLOGY INTERNATIONAL, 2020, 151
  • [25] MECHANICAL CHARACTERIZATION AND FRACTOGRAPHY OF 100-125 MICRON SIZED SILICON CARBIDE PARTICLES REINFORCED Al6061 ALLOY COMPOSITES
    Nagaral, Madeva
    Mohan, Murali R.
    Auradi, V
    Bharath, V
    METALLURGICAL & MATERIALS ENGINEERING, 2022, 28 (01) : 17 - 32
  • [26] Superplasticity in 6061 aluminum alloy matrix composites reinforced with silicon nitride whiskers
    Mabuchi, Mamoru
    Imai, Tsunemichi
    Kubo, Katsushi
    Keikinzoku/Journal of Japan Institute of Light Metals, 1991, 41 (02):
  • [27] Microstructure and Mechanical Properties of AlSiTiCrNiCu Particles Reinforced Al6061 Composites by SPS and HPS Process
    Zhijun Wang
    Shengjie Zhou
    Puzhen Shao
    Kai Sun
    Qiang Zhang
    Zijang Xiu
    Haiying Xiao
    Gaohui Wu
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2022, 37 : 1 - 12
  • [28] Simple study on behavior of composites with augmentation of Silicon carbide on Al6061 aluminium alloy based on mechanical properties
    Muruganandam, D.
    Jayapriya, J.
    Suresh, M.
    Chitradevi, S.
    Puthilibai, G.
    Sudhakar, M.
    MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 4573 - 4577
  • [29] Microstructure and Mechanical Properties of AlSiTiCrNiCu Particles Reinforced Al6061 Composites by SPS and HPS Process
    王智君
    ZHOU Shengjie
    SHAO Puzhen
    SUN Kai
    张强
    修子扬
    肖海英
    WU Gaohui
    Journal of Wuhan University of Technology(Materials Science), 2022, 37 (01) : 1 - 12
  • [30] Spark plasma sintering of boron carbide reinforced aluminum alloy (Al6061) matrix composites
    Khan, Mahmood
    Ud-Din, Rafi
    Syed, Wilayat Husain
    Akhtar, Shahid
    Aune, Ragnhild Elizabeth
    PROCEEDINGS OF 2019 16TH INTERNATIONAL BHURBAN CONFERENCE ON APPLIED SCIENCES AND TECHNOLOGY (IBCAST), 2019, : 35 - 41