Determination of effective specific heat capacity of interior plaster containing phase change materials

被引：0
|
作者：
Koci, Vaclav [1 ]
Madera, Jiri [1 ]
Cerny, Robert [1 ]
机构：
[1] Czech Tech Univ, Fac Civil Engn, Dept Mat Engn & Chem, Thakurova 7-2077, Prague 16629 6, Czech Republic
来源：
4TH CENTRAL EUROPEAN SYMPOSIUM ON BUILDING PHYSICS (CESBP 2019) | 2019年 / 282卷
关键词：
PERFORMANCE; BUILDINGS;
D O I：
10.1051/matecconf/201928202052
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
A precise technique for determination of effective specific heat capacity of building materials is presented within this paper. The applicability of the technique is demonstrated on a PCM-enhanced plaster, being characterized by a phase change between 15 and 30 degrees C. The effective specific heat capacity is determined by means of inverse analysis of calorimetric data using computational model of the device. The identified effective specific heat capacity values reached up to 1890 J.kg(-1).K-1 when cooled and 1580 J.kg(-1).K-1 when heated. Using this quantity in simulation of thermal performance, the PCM-enhanced plaster showed to have a promising potential to be used in buildings' interiors as a thermal regulator to stabilize inner environment as it contributed to a thermal oscillation decrease by up to 2.5 degrees C
引用
收藏
页数：7
相关论文
共 50 条
  • [31] Supercooling of phase change: A new modeling formulation using apparent specific heat capacity
    Davin, Tanguy
    Lefez, Benoit
    Guillet, Alain
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2020, 147
  • [32] Numerical solution of phase change heat transfer problems by effective heat capacity model and element differential method
    Cui, Miao
    Zhang, Chunyun
    Zhang, Bowen
    Xu, Bingbing
    Peng, Haifeng
    Gao, Xiao-wei
    JOURNAL OF COMPUTATIONAL SCIENCE, 2022, 60
  • [33] The effect of the sample pan position on the determination of the specific heat capacity for lipid materials using heat flux DSC
    Al-Qatami, Omar
    Mazzanti, Gianfranco
    THERMOCHIMICA ACTA, 2022, 710
  • [34] Experimental determination of the effective thermal capacity function and other thermal properties for various phase change materials using the thermal delay method
    Kravvaritis, E. D.
    Antonopoulos, K. A.
    Tzivanidis, C.
    APPLIED ENERGY, 2011, 88 (12) : 4459 - 4469
  • [35] A mathematical model for heat transfer in fire fighting suits containing phase change materials
    Phelps, Hannah
    Sidhu, Harvinder
    FIRE SAFETY JOURNAL, 2015, 74 : 43 - 47
  • [36] Determination of specific heat capacity of sulphide materials at temperatures below 100 °C in presence of moisture
    Ngabe, Barnabe
    Finch, James A.
    MINERALS ENGINEERING, 2014, 58 : 73 - 79
  • [37] Enhancing Heat Capacity of Colloidal Suspension Using Nanoscale Encapsulated Phase-Change Materials for Heat Transfer
    Hong, Yan
    Ding, Shujiang
    Wu, Wei
    Hu, Jianjun
    Voevodin, Andrey A.
    Gschwender, Lois
    Snyder, Ed.
    Chow, Louis
    Su, Ming
    ACS APPLIED MATERIALS & INTERFACES, 2010, 2 (06) : 1685 - 1691
  • [38] Study on the Influence of Phase Change Process on the Desorption Characteristics of Gas-Containing Anthracite in Phase Change Heat Storage Materials
    Zhou, Rui
    Liu, Xianfeng
    Jia, Xueqi
    Nie, Baisheng
    Ma, Yankun
    Li, Chuang
    SOLID FUEL CHEMISTRY, 2024, 58 (04) : 297 - 305
  • [39] Investigations of the specific heat capacity of selected heterogeneous materials
    Galek, Rafal
    Wilk, Joanna
    ARCHIVES OF THERMODYNAMICS, 2024, 45 (02) : 91 - 98
  • [40] Phase change materials of microcapsules containing paraffin
    Huang, Dianwu
    Wang, Hongmei
    ADVANCED COMPOSITE MATERIALS, PTS 1-3, 2012, 482-484 : 1596 - +
12345