Effects of rare earth element Ce on solderabilities of micron-powdered Sn-Ag-Cu solder

被引：0

作者：

Xue, SB ^{[1
]}

Yu, SL

Wang, XY

Liu, L

Hu, YF

Yao, LH

机构：

[1] Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 210016, Peoples R China

[2] China Elect Technol Grp Corp, Res Inst 14th, Nanjing 210013, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2005年 / 15卷 / 06期

关键词：

lead-free solder; Sn-Ag-Cu-Ce alloy; wetting time; solidus; liquidus;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Several important properties of the micron-powdered Sn-Ag-Cu-Ce solder, including the spreadability, spreading ratio, wetting time, and melting point, were investigated for verifying the effects of rare earth element Ce on solderabilities of micron-powdered Sn-Ag-Cu solder. The solidus and the liquidus of the micron-powdered Sn-Ag-Cu-Ce solder are 193.6 degrees C and 218.4 degrees C, respectively, about 28 degrees C and 3 degrees C lower than the melting point of the block Sn-Ag-Cu solder, which reminds the existence of the surface effect of the micron-powdered solder. By adding Ce into Sn-Ag-Cu alloy, its wetting time on pure copper can be obviously decreased. For the Sn-Ag-Cu-0.03%Ce, the soldering temperature is 250 degrees C, and the wetting time on pure copper is close to 1 s, with the soldering temperature approaching to 260 the wetting time is dropped to 0.8 s, which is close to the wetting time, 0.68 s, of Sn-Pb solder at 235 degrees C.

引用

页码：1285 / 1289

页数：5

共 50 条

[31] Undercooling of Sn-Ag-Cu alloys: solder balls and solder joints solidification
Hodaj, Fiqiri
Petit, Luc
Baggetto, Loic
Boisier, Olivier
Verneyre, Lionel
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2013, 104 (09) : 874 - 878
[32] Experimental and thermodynamic assessment of Sn-Ag-Cu solder alloys
K. -W. Moon
W. J. Boettinger
U. R. Kattner
F. S. Biancaniello
C. A. Handwerker
Journal of Electronic Materials, 2000, 29 : 1122 - 1136
[33] Microstructures Evolution and Properties of Sn-Ag-Cu Solder Joints
Sun Lei
Chen Minghe
Zhang Liang
Yang Fan
ACTA METALLURGICA SINICA, 2017, 53 (05) : 615 - 621
[34] Temperature Effects on the Whiskers in Rare-Earth Doped Sn-3Ag-0.5Cu-0.5Ce Solder Joints
Tung-Han Chuang
Metallurgical and Materials Transactions A, 2007, 38 : 1048 - 1055
[35] Microstructure and mechanical property of Sn-Ag-Cu solder material
Kong, Yi-Gang
Kong, Zhi-Gang
Shi, Feng-Min
RARE METALS, 2017, 36 (03) : 193 - 197
[36] Finite Element Simulation of Sn-Ag-Cu Solder Joint Reliability Under Thermoelectric Coupling
Xianyu Wang
Liang He
Hua Chen
Xiaolei Xiao
Journal of Electronic Materials, 2023, 52 : 7512 - 7524
[37] Sn-Ag-Cu Nanosolders: Solder Joints Integrity and Strength
Roshanghias, Ali
Khatibi, Golta
Yakymovych, Andriy
Bernardi, Johannes
Ipser, Herbert
JOURNAL OF ELECTRONIC MATERIALS, 2016, 45 (08) : 4390 - 4399
[38] Sn-Ag-Cu lead free solder SMT process
Shieh, PY
ADVANCED ELECTRONICS ASSEMBLY - A SYMPOSIUM ON LEAD FREE INTERCONNECT TECHNOLOGY, PROCEEDINGS OF THE TECHNICAL PROGRAM, 2000, : 83 - 86
[39] Review on the effect of alloying element and nanoparticle additions on the properties of Sn-Ag-Cu solder alloys
Noor, Ervina Efzan Mhd
Singh, Amares
SOLDERING & SURFACE MOUNT TECHNOLOGY, 2014, 26 (03) : 147 - 161
[40] INDENTATION SIZE EFFECT ON THE HARDNESS OF A Sn-Ag-Cu SOLDER
Han, Y. D.
Jing, H. Y.
Nai, S. M. L.
Xu, L. Y.
Tan, C. M.
Wei, J.
IMCE2009: PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, VOL 5, 2010, : 137 - +

← 1 2 3 4 5 →