Bonding Wire Fatigue Life Prediction of Power Module in Thermal Cycling Test

被引：0
|
作者：
Guo, Yuanqi [1 ]
Xu, Yangjian [1 ]
Liang, Lihua [1 ]
Liu, Yong [2 ]
机构：
[1] Zhejiang Univ Technol, Coll Mech Engn, Hangzhou, Zhejiang, Peoples R China
[2] Fairchild Semicond, Portland, ME USA
来源：
2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT) | 2016年
关键词：
wire bonding; thermal cycling test; finite element simulation;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In this paper, 3-D finite element (FE) models were established to investigate the fatigue lives of bonding wire in different power packages in thermal cycling test. Meanwhile, three types of packages were tested. Bonding wire lift-off and neck failures took place during test, which were caused by the coefficient of thermal expansion (CTE) mismatch between wire and chip. Finally, a strain-based life prediction relation for thermal cycling test was proposed by combining the experiment results with simulation data.
引用
收藏
页码：482 / 485
页数：4
相关论文
共 50 条
  • [31] Impact of Solder Fatigue on Module Lifetime in Power Cycling Tests
    Scheuermann, Uwe
    Schmidt, Ralf
    PROCEEDINGS OF THE 2011-14TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE 2011), 2011,
  • [32] Thermal cycling characterization of integrated GaN power module
    Sun, Zhongchao
    Takahashi, Masaki
    Munk-Nielsen, Stig
    Jorgensen, Asger Bjorn
    2023 25TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, EPE'23 ECCE EUROPE, 2023,
  • [33] Revisiting power cycling test for better life-time prediction in traction
    Mermet-Guyennet, M.
    Perpina, X.
    Piton, M.
    MICROELECTRONICS RELIABILITY, 2007, 47 (9-11) : 1690 - 1695
  • [34] Thermal performance and fatigue life prediction of POP stacked chip assembly under thermal cycling load
    Li, Dongbo
    Wang, Jianpei
    Yang, Bing
    Hu, Yongle
    Yang, Ping
    MICROELECTRONICS INTERNATIONAL, 2020, 37 (04) : 165 - 171
  • [35] Solder fatigue failures in a new designed power module under Power Cycling
    Durand, C.
    Klingler, M.
    Bigerelle, M.
    Coutellier, D.
    MICROELECTRONICS RELIABILITY, 2016, 66 : 122 - 133
  • [36] FINITE ELEMENT ANALYSIS AND FATIGUE LIFE PREDICTION OF A LATERALLY CONDUCTING GAN-BASED POWER PACKAGE UNDER THERMAL CYCLING
    Zaghari, Pouria
    Sinha, Sourish S.
    Ryu, Jong Eun
    Franzon, Paul D.
    Hopkins, Douglas C.
    PROCEEDINGS OF ASME 2023 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2023, VOL 12, 2023,
  • [37] Higher Thermal Cycling Reliability of Power Semiconductor Module for Power Converters
    Morozumi, Akira
    Hokazono, H.
    Nishimura, Yoshitaka
    Kariya, Yoshiharu
    Mochizuki, Eiji
    Takahashi, Yoshikazu
    2016 International Conference on Electronics Packaging (ICEP), 2016, : 405 - 410
  • [38] A Gallium Nitride Intelligent Power Module Based on Bonding Wire Interconnection
    Yao, Yilong
    Zhang, Hong
    Yang, Fengtao
    Kong, Hang
    Wang, Yan
    Dong, Xiaobo
    Wang, Laili
    Wang, Kangping
    2023 IEEE APPLIED POWER ELECTRONICS CONFERENCE AND EXPOSITION, APEC, 2023, : 2538 - 2544
  • [39] The degradation investigation of Al wire bonding strength in power device under thermal shock test
    Fei, Jingming
    Ren, Ping
    Wang, Ningning
    Zhang, Binbin
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 1179 - 1183
  • [40] Study of Cu Wire Crack under Thermal Cycling Test
    Fan, Haibo
    Chow, W. W.
    Wong, Fei
    Liu, Dashun
    Chen, Haibin
    Wu, Jingshen
    2018 19TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2018,
12345