Bonding Wire Fatigue Life Prediction of Power Module in Thermal Cycling Test

被引：0
|
作者：
Guo, Yuanqi [1 ]
Xu, Yangjian [1 ]
Liang, Lihua [1 ]
Liu, Yong [2 ]
机构：
[1] Zhejiang Univ Technol, Coll Mech Engn, Hangzhou, Zhejiang, Peoples R China
[2] Fairchild Semicond, Portland, ME USA
来源：
2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT) | 2016年
关键词：
wire bonding; thermal cycling test; finite element simulation;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
In this paper, 3-D finite element (FE) models were established to investigate the fatigue lives of bonding wire in different power packages in thermal cycling test. Meanwhile, three types of packages were tested. Bonding wire lift-off and neck failures took place during test, which were caused by the coefficient of thermal expansion (CTE) mismatch between wire and chip. Finally, a strain-based life prediction relation for thermal cycling test was proposed by combining the experiment results with simulation data.
引用
收藏
页码：482 / 485
页数：4
相关论文
共 50 条
  • [1] Bonding Wire Life Prediction Model of the Power Module under Power Cycling Test
    Hung, Tuan-Yu
    Wang, Chin-Chun
    Chiang, Kuo-Ning
    2013 14TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2013,
  • [2] Thermal-mechanical behavior of the bonding wire for a power module subjected to the power cycling test
    Hung, T. Y.
    Chiang, S. Y.
    Huang, C. J.
    Lee, C. C.
    Chiang, K. N.
    MICROELECTRONICS RELIABILITY, 2011, 51 (9-11) : 1819 - 1823
  • [3] Reliability Prediction of LED Packaging by Fatigue Behavior of bonding Wire in Power Cycling Accelerated Test
    Pan, Yongjun
    Zhu, Fulong
    Fan, Jiajie
    Lin, Xinxin
    Wang, Fengren
    Shi, Lang
    Kan, Yan
    Liu, Sheng
    2017 IEEE 19TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), 2017,
  • [4] The Solder Life Prediction Model of Power Module under Thermal Cycling Test (TCT)
    Chen, Hao-Chih
    Guo, Siao-Wei
    Liao, Hsueh-Kuo
    2018 13TH INTERNATIONAL MICROSYSTEMS, PACKAGING, ASSEMBLY AND CIRCUITS TECHNOLOGY CONFERENCE (IMPACT), 2018, : 104 - 107
  • [5] Study on Cu Wire Wedge Crack and Fatigue Life Prediction during Thermal Cycling Test (TCT)
    Bi, Billie Xianghong
    Fan, Haibo
    Yang, Jun
    Chen, Haibin
    2020 IEEE 22ND ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), 2020, : 168 - 171
  • [6] Life Prediction of High-Cycle Fatigue in Aluminum Bonding Wires Under Power Cycling Test
    Hung, Tuan-Yu
    Liao, Li-Ling
    Wang, C. C.
    Chi, W. H.
    Chiang, Kuo-Ning
    IEEE TRANSACTIONS ON DEVICE AND MATERIALS RELIABILITY, 2014, 14 (01) : 484 - 492
  • [7] Numerical simulation of the wire bonding reliability of IGBT module under power cycling
    Bie Xiaorui
    Qin Fei
    An Tong
    Zhao Jingyi
    Fang Chao
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 1396 - 1401
  • [8] Investigation of solder crack behavior and fatigue life of the power module on different thermal cycling period
    Hung, Tuan-Yu
    Huang, Chao-Jen
    Lee, Chang-Chun
    Wang, Chin-Chun
    Lu, Keng-Cheng
    Chiang, Kuo-Ning
    MICROELECTRONIC ENGINEERING, 2013, 107 : 125 - 129
  • [9] Combination of thermal cycling and vibration loading effects on the fatigue life of solder joints in a power module
    Ghaderi, Davood
    Pourmahdavi, Maryam
    Samavatian, Vahid
    Mir, Omid
    Samavatian, Majid
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2019, 233 (09) : 1753 - 1763
  • [10] Numerical Prediction of Solder Fatigue Life in a High Power IGBT Module Using Ribbon Bonding
    Suh, Il-Woong
    Jung, Hoon-Sun
    Lee, Young -Ho
    Choa, Sung-Hoon
    JOURNAL OF POWER ELECTRONICS, 2016, 16 (05) : 1843 - 1850
12345