HEAT TRANSFER CHARACTERISTICS OF SWIRLING IMPINGING JETS

被引：0
|
作者：
Brown, Karl J. [1 ]
Persoons, Tim [1 ]
Murray, Darina B. [1 ]
机构：
[1] Trinity Coll Dublin, Dept Mech Engn, Dublin 2, Ireland
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL HEAT TRANSFER CONFERENCE - 2010, VOL 5: FUEL CELLS, GAS TURBINES, HEAT PIPES, JET IMPINGEMENT, RADIATION | 2010年
关键词：
Heat transfer swirling impinging jet fluctuations; VISUALIZATION; FLOW;
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Impinging jets are well renowned for their abilities to achieve significantly high heat transfer coefficients. It has been found in previous studies that the incorporation of a swirl in the flow can enhance heat transfer but it can also decrease it. The objective of this research is to discover the defining characteristics of swirling impinging jets and to find an optimal swirl geometry for enhancing the heat transfer of the system. Using thermal imaging and hot film sensor techniques the heat transfer distribution of the swirling jet is examined in the context of the flow field; heat flux fluctuations at the impinging surface are investigated also.
引用
收藏
页码：657 / 665
页数：9
相关论文
共 50 条
  • [41] HEAT TRANSFER CHARACTERISTICS OF IMPINGING 2-DIMENSIONAL AIR JETS
    GARDON, R
    AKFIRAT, JC
    MECHANICAL ENGINEERING, 1965, 87 (09) : 74 - &
  • [42] Flow and heat transfer characteristics of confined noncircular turbulent impinging jets
    Zhao, WN
    Kumar, K
    Mujumdar, AS
    DRYING TECHNOLOGY, 2004, 22 (09) : 2027 - 2049
  • [43] Heat Transfer Characteristics of Passive, Active, and Hybrid Impinging Jets: A Review
    Matar, Michel
    El Hassan, Mohammad
    Bukharin, Nikolay
    Sakout, Anas
    Hammoud, Ali
    Assoum, Hassan H.
    INTERNATIONAL JOURNAL OF TECHNOLOGY, 2025, 16 (01) : 46 - 71
  • [44] Heat transfer rate of swirling impinging jets issuing from a twisted tetra-lobed nozzle
    Wongcharee, Khwanchit
    Kunnarak, Kengkla
    Chuwattanakul, Varesa
    Eiamsa-ard, Smith
    CASE STUDIES IN THERMAL ENGINEERING, 2020, 22
  • [45] Numerical study on heat transfer by swirling impinging jets issuing from a screw-thread nozzle
    Xu, Liang
    Lan, Jin
    Ma, Yonghao
    Gao, Jianmin
    Li, Yunlong
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 115 : 232 - 237
  • [46] Forced convective heat transfer by swirling impinging jets issuing from nozzles equipped with twisted tapes
    Nanan, K.
    Wongcharee, K.
    Nuntadusit, C.
    Eiamsa-ard, S.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2012, 39 (06) : 844 - 852
  • [47] Heat transfer of swirling impinging jets ejected from Nozzles with twisted tapes utilizing CFD technique
    Amini, Younes
    Mokhtari, Mojtaba
    Haghshenasfard, Masoud
    Gerdroodbary, M. Barzegar
    CASE STUDIES IN THERMAL ENGINEERING, 2015, 6 (06) : 104 - 115
  • [48] Heat transfer and fluid flow of swirling impinging jets ejected from nozzles with different twisted tapes
    Nasirzadeh, Hamid
    Yazdi, Mohammad Eftekhari
    Lavasani, Arash Mirabdolah
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2022, 44 (11)
  • [49] Heat transfer and fluid flow of swirling impinging jets ejected from nozzles with different twisted tapes
    Hamid Nasirzadeh
    Mohammad Eftekhari Yazdi
    Arash Mirabdolah Lavasani
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2022, 44
  • [50] Heat transfer rate of swirling impinging jets issuing from a twisted tetra-lobed nozzle
    Wongcharee, Khwanchit
    Kunnarak, Kengkla
    Chuwattanakul, Varesa
    Eiamsa-Ard, Smith
    Chuwattanakul, Varesa (varesaatkmitl@gmail.com), 1600, Elsevier Ltd (22):
12345