HEAT TRANSFER CHARACTERISTICS OF SWIRLING IMPINGING JETS

被引：0
|
作者：
Brown, Karl J. [1 ]
Persoons, Tim [1 ]
Murray, Darina B. [1 ]
机构：
[1] Trinity Coll Dublin, Dept Mech Engn, Dublin 2, Ireland
来源：
PROCEEDINGS OF THE ASME INTERNATIONAL HEAT TRANSFER CONFERENCE - 2010, VOL 5: FUEL CELLS, GAS TURBINES, HEAT PIPES, JET IMPINGEMENT, RADIATION | 2010年
关键词：
Heat transfer swirling impinging jet fluctuations; VISUALIZATION; FLOW;
D O I：
暂无
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Impinging jets are well renowned for their abilities to achieve significantly high heat transfer coefficients. It has been found in previous studies that the incorporation of a swirl in the flow can enhance heat transfer but it can also decrease it. The objective of this research is to discover the defining characteristics of swirling impinging jets and to find an optimal swirl geometry for enhancing the heat transfer of the system. Using thermal imaging and hot film sensor techniques the heat transfer distribution of the swirling jet is examined in the context of the flow field; heat flux fluctuations at the impinging surface are investigated also.
引用
收藏
页码：657 / 665
页数：9
相关论文
共 50 条
  • [31] Flow and Heat Transfer Characteristics of Swirling Impinging Micro-Slot Jets by Adopting Circular Ribs in the Wall Jet Region
    Kaewchoothong, Natthaporn
    Nuntadusit, Chayut
    HEAT TRANSFER ENGINEERING, 2024,
  • [32] Heat Transfer and Flow Characteristics of Fluid Jets Impinging on a Surface with Cavities
    Chandratilleke, Tilak T.
    King, Andrew J. C.
    Narayanaswamy, R.
    JOURNAL OF ENHANCED HEAT TRANSFER, 2010, 17 (03) : 223 - 229
  • [33] Heat transfer characteristics of impinging jets: The influence of unsteadiness with different waveforms
    Geng, Liping
    Zheng, Chuanbo
    Zhou, Jingwei
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2015, 66 : 105 - 113
  • [34] Heat transfer characteristics of slot and round premixed impinging flame jets
    Kwok, LC
    Leung, CW
    Cheung, CS
    EXPERIMENTAL HEAT TRANSFER, 2003, 16 (02) : 111 - 137
  • [35] The numerical simulation of heat transfer characteristics for different periodical impinging jets
    Geng, Li-Ping
    Yang, Mo
    Zhou, Jing-Wei
    Hong, Fei-Fei
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2011, 32 (SUPPL. 1): : 182 - 185
  • [36] Experimental investigation of the heat transfer characteristics of confined impinging slot jets
    Gao, XF
    Sundén, B
    EXPERIMENTAL HEAT TRANSFER, 2003, 16 (01) : 1 - 18
  • [37] HEAT TRANSFER CHARACTERISTICS OF IMPINGING 2-DIMENSIONAL AIR JETS
    GARDON, R
    AKFIRAT, JC
    JOURNAL OF HEAT TRANSFER, 1966, 88 (01): : 101 - &
  • [38] Heat transfer and flow characteristics of a pair of adjacent impinging synthetic jets
    Fanning, Eoin
    Persoons, Tim
    Murray, Darina B.
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2015, 54 : 153 - 166
  • [39] Experimental study on heat transfer characteristics of hybrid nanofluid impinging jets
    Sun, Bin
    Zhang, Yue
    Yang, Di
    Li, Hongwei
    APPLIED THERMAL ENGINEERING, 2019, 151 : 556 - 566
  • [40] Heat transfer characteristics of impinging two-dimensional flame jets
    Kwok, LC
    Cheung, CS
    Leung, CW
    COMBUSTION SCIENCE AND TECHNOLOGY IN ASIA-PACIFIC AREA: TODAY AND TOMORROW, 2003, : 60 - 63
12345