Continuous-membrane surface-micromachined silicon deformable mirror

被引：101
|
作者：
Bifano, TG
Mali, RK
Dorton, JK
Perreault, J
Vandelli, N
Horenstein, MN
Castanon, DA
机构：
[1] Boston University, College of Engineering, Boston
[2] Boston University, Prec. Eng. Research Laboratory
[3] University of California, Berkeley, CA
[4] Spire Corporation, Bedford, MA
[5] Dept. of Elec. and Comp. Engineering, Boston University
[6] Boston University, Micro-opto-mechanical Systems Team
[7] ALPHATECH, Inc., Burlington, MA
来源：
OPTICAL ENGINEERING | 1997年 / 36卷 / 05期
关键词：
micro-opto-electro-mechanical systems; deformable mirror; surface-micromachined; adaptive optics;
D O I：
10.1117/1.601598
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
The authors describe the development of a new type of micromachined device designed for use in correcting optical aberrations. A nine-element continuous deformable mimer was fabricated using surface micromachining. The electromechanical behavior of the deformable mirror was measured. A finite-difference model for predicting the mirror deflections was developed. In addition, novel fabrication techniques were developed to permit the production of nearly planar mirror surfaces. (C) 1997 Society of Photo-Optical Instrumentation Engineers.
引用
收藏
页码：1354 / 1360
页数：7
相关论文
共 50 条
  • [41] Surface-micromachined capacitive differential pressure sensor with lithographically defined silicon diaphragm
    Univ of Michigan, Ann Arbor, United States
    J Microelectromech Syst, 2 (98-105):
  • [42] Surface-micromachined capacitive differential pressure sensor with lithographically defined silicon diaphragm
    Mastrangelo, CH
    Zhang, X
    Tang, WC
    JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 1996, 5 (02) : 98 - 105
  • [43] Characterization techniques for surface-micromachined devices
    Eaton, WP
    Smith, NF
    Irwin, L
    Tanner, DM
    MICROMACHINED DEVICES AND COMPONENTS IV, 1998, 3514 : 431 - 438
  • [44] A surface-micromachined tunable vibratory gyroscope
    Oh, Y
    Lee, B
    Baek, S
    Kim, H
    Kim, J
    Kang, S
    Song, C
    MEMS 97, PROCEEDINGS - IEEE THE TENTH ANNUAL INTERNATIONAL WORKSHOP ON MICRO ELECTRO MECHANICAL SYSTEMS: AN INVESTIGATION OF MICRO STRUCTURES, SENSORS, ACTUATORS, MACHINES AND ROBOTS, 1997, : 272 - 277
  • [45] Analysis of a surface-micromachined peristaltic pump
    Lin, Q
    Yang, BZ
    Xie, J
    Tai, YC
    MICRO TOTAL ANALYSIS SYSTEMS 2004, VOL 1, 2005, (296): : 611 - 613
  • [46] Actuation of polysilicon surface-micromachined mirrors
    Tien, NC
    Kiang, MH
    Daneman, MJ
    Solgaard, O
    Lau, KY
    Muller, RS
    MINIATURIZED SYSTEMS WITH MICRO-OPTICS AND MICROMECHANICS, 1996, 2687 : 53 - 59
  • [47] Failure analysis of surface-micromachined microengines
    Peterson, KA
    Tangyunyong, P
    Pimentel, AA
    MATERIALS AND DEVICE CHARACTERIZATION IN MICROMACHINING, 1998, 3512 : 190 - 200
  • [48] Characterization techniques for surface-micromachined devices
    Eaton, WP
    Smith, NF
    Irwin, L
    Tanner, DM
    MICROMACHINED DEVICES AND COMPONENTS IV, 1998, 3514 : 171 - 178
  • [49] Aberration-free dynamic focusing with a multichannel micromachined membrane deformable mirror
    Zhu, LJ
    Sun, PC
    Fainman, Y
    APPLIED OPTICS, 1999, 38 (25) : 5350 - 5354
  • [50] Surface-micromachined silicon air-gap Bragg reflector for thermal infrared
    Tuohiniemi, M.
    Blomberg, M.
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2011, 21 (07)
12345