Optimization of parameters effecting food drying using Taguchi method

被引：1

作者：

Turkan, Burak ^{[1
]}

Etemoglu, Akin Burak ^{[1
]}

机构：

[1] Bursa Uludag Univ, Muhendislik Fak, Makine Muhendisligi Bolumu, Bursa, Turkey

来源：

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI | 2020年 / 26卷 / 04期

关键词：

Taguchi method; Drying Shrinkage; Exergy efficiency; MOISTURE TRANSFER; EXERGY ANALYSES; HEAT; DIFFUSIVITY; SLICES; ENERGY; MODEL; SHRINKAGE; POTATO;

D O I：

10.5505/pajes.2019.93695

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study indicates the optimization of the parameters affecting the drying of the cucumber using the Taguchi method in the convective dryer. Air velocity of 0.5, 0.8 and 1 m/s, air temperature of 40, 50 and 60 degrees C and product thickness of 0.5, 1 and 1.5 cm were taken as drying parameters. At the end of the drying period, the contribution factor of each parameter on the product moisture, shrinkage coefficien4 exergy efficiency, and exergetic improvement potential was investigated by ANOVA analysis. It was detected that the effect of thickness on the drying of the product and the effect of air temperature on exergy efficiency were the highest. The optimum drying conditions were found to be air velocity of 1 m/s, air temperature of 60 degrees C and product thickness of 0.5 cm to minimize drying time. For maximum exergy efficiency, air velocity of 0.5 m/s, air temperature of 60 degrees C and product thickness of 0.5 cm should be selected.

引用

页码：654 / 665

页数：12

共 50 条

[41] Optimization of parameters for deposition of ZnO films by sol gel using Taguchi method
Ammaih, Youssef
Lfakir, Abderrazak
Hartiti, Bouchaib
Ridah, Abderraouf
Siadat, Meryame
Thevenin, Philippe
MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 2016, 627 (01) : 176 - 182
[42] Optimization of Machining Parameters using EDM in Gas Media Based on Taguchi Method
Wang, Der-An
Lin, Yan-Cherng
Chow, Han-Ming
Fan, Shih-Feng
Wang, A-Cheng
ADVANCED RESEARCH ON INDUSTRY, INFORMATION SYSTEM AND MATERIAL ENGINEERING, 2012, 459 : 170 - +
[43] Experimental optimization of cutting parameters in turning of brass alloy using Taguchi method
Krishnan, J. Yadu
Sundar, S. Poorna
Karthikeyan, L.
Ajay, C. Veera
Manisekar, K.
MATERIALS TODAY-PROCEEDINGS, 2021, 42 : 377 - 382
[44] Optimization of Nanostructuring Burnishing Technological Parameters by Taguchi Method
Kuznetsov, V. P.
Dmitriev, A. I.
Anisimova, G. S.
Semenova, Yu V.
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING, AUTOMATION AND CONTROL SYSTEMS 2015 (MEACS2015), 2016, 124
[45] Optimization to the parameters of abrasive flow machining by Taguchi method
Butola, Ravi
Jain, Rishabh
Bhangadia, Priyesh
Bandhu, Ashwani
Walia, R. S.
Murtaza, Qasim
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 4720 - 4729
[46] Optimization of Molding Parameters for a Micro Gear with Taguchi Method
Wang, Min-Wen
Arifin, Fatahul
Thi Truc-Ngan Huynh
2ND FORUM IN RESEARCH, SCIENCE, AND TECHNOLOGY, 2019, 1167
[47] Application of Taguchi method in the optimization of end milling parameters
Ghani, JA
Choudhury, IA
Hassan, HH
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 145 (01) : 84 - 92
[48] Optimization of Bending Process Parameters for Seamless Tubes Using Taguchi Method and Finite Element Method
Lin, Jui-Chang
Lee, Kingsun
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015, 2015
[49] Application of Taguchi Method for Optimization of Parameters in Turning Operation
Singaravel, B.
Selvaraj, T.
JOURNAL FOR MANUFACTURING SCIENCE AND PRODUCTION, 2016, 16 (03) : 183 - 187
[50] Optimization of process parameters to improve mechanical properties of fused deposition method using taguchi method
Giri J.
Sunheriya N.
Sathish T.
Kadu Y.
Chadge R.
Giri P.
Parthiban A.
Mahatme C.
Interactions, 2024, 245 (01)

← 1 2 3 4 5 →