Optimization of parameters effecting food drying using Taguchi method

被引：1

作者：

Turkan, Burak ^{[1
]}

Etemoglu, Akin Burak ^{[1
]}

机构：

[1] Bursa Uludag Univ, Muhendislik Fak, Makine Muhendisligi Bolumu, Bursa, Turkey

来源：

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI | 2020年 / 26卷 / 04期

关键词：

Taguchi method; Drying Shrinkage; Exergy efficiency; MOISTURE TRANSFER; EXERGY ANALYSES; HEAT; DIFFUSIVITY; SLICES; ENERGY; MODEL; SHRINKAGE; POTATO;

D O I：

10.5505/pajes.2019.93695

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study indicates the optimization of the parameters affecting the drying of the cucumber using the Taguchi method in the convective dryer. Air velocity of 0.5, 0.8 and 1 m/s, air temperature of 40, 50 and 60 degrees C and product thickness of 0.5, 1 and 1.5 cm were taken as drying parameters. At the end of the drying period, the contribution factor of each parameter on the product moisture, shrinkage coefficien4 exergy efficiency, and exergetic improvement potential was investigated by ANOVA analysis. It was detected that the effect of thickness on the drying of the product and the effect of air temperature on exergy efficiency were the highest. The optimum drying conditions were found to be air velocity of 1 m/s, air temperature of 60 degrees C and product thickness of 0.5 cm to minimize drying time. For maximum exergy efficiency, air velocity of 0.5 m/s, air temperature of 60 degrees C and product thickness of 0.5 cm should be selected.

引用

页码：654 / 665

页数：12

共 50 条

[21] Optimization of Drilling Parameters of Fabricated GFRP Composite using Taguchi Method
Nanubala, Niranjan
Yadav, Mahesh J.
Danduk, Chaitanya
Subbu, S. Kanmani
2016 INTERNATIONAL CONFERENCE ON ENERGY EFFICIENT TECHNOLOGIES FOR SUSTAINABILITY (ICEETS), 2016, : 881 - 885
[22] Optimization of machining parameters in rotary EDM process by using the Taguchi method
E. Aliakbari
H. Baseri
The International Journal of Advanced Manufacturing Technology, 2012, 62 : 1041 - 1053
[23] Optimization of Constrained Layer Damping Parameters in Beam Using Taguchi Method
Sasikumar, K. S. K.
Arulshri, K. P.
Selvakumar, S.
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF MECHANICAL ENGINEERING, 2017, 41 (03) : 243 - 250
[24] Modelling and optimization of the best parameters of rice husk drying and carbonization by using Taguchi method with multi response signal to noise procedure
2017, International Journal of Renewable Energy Research (07):
[25] Optimization of Engine Parameters using Polanga Biodiesel and Diesel Blends by using Taguchi Method
Sharma, Abhishek
Ansari, Naushad Ahmad
Singh, Yashvir
Mustefa, Ibrahim
Vivekanandhan, C.
MATERIALS TODAY-PROCEEDINGS, 2018, 5 (14) : 28221 - 28228
[26] Optimization of Lathe Cutting Parameters Using Taguchi Method and Grey Relational Analysis
Jian, Bo-Lin
Wang, Cheng-Chi
Yau, Her-Terng
Wu, Li-Wei
Tian, An-Hong
SENSORS AND MATERIALS, 2020, 32 (03) : 843 - 858
[27] Optimization of injection molding parameters for Kenaf/PP composite using Taguchi method
Radzi, Mohd Khairul Fadzly Md
Sulong, Abu Bakar
Muhamad, Norhamidi
Razak, Zakaria
PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ADVANCED PROCESSES AND SYSTEMS IN MANUFACTURING (APSIM 2016), 2016, : 121 - 122
[28] PRELIMINARY ANALYSIS OF FSW PARAMETERS OPTIMIZATION USING THE TAGUCHI METHOD - TEMPERATURE RESPONSE
Libanio, E. R.
Rodriguez, R. R.
de Figueiredo, M. A. V.
Moreira, P. M. G. P.
ICEM15: 15TH INTERNATIONAL CONFERENCE ON EXPERIMENTAL MECHANICS, 2012,
[29] Optimization of the sputtering process parameters of GZO films using the Grey Taguchi method
Chen, Chien-Chih
Tsao, Chung-Chen
Lin, You-Chiuan
Hsu, Chun-Yao
CERAMICS INTERNATIONAL, 2010, 36 (03) : 979 - 988
[30] Optimization of Injection Molding Process Parameters for Carabineer Lock Using the Taguchi Method
Eddy, Priscilia Annie Anak
Khor, C. Y.
Rosli, M. U.
Ishak, Muhammad Ikman
INTELLIGENT MANUFACTURING AND MECHATRONICS, SIMM 2023, 2024, : 653 - 663

← 1 2 3 4 5 →