High-efficiency blazed diffractive optical elements for the violet wavelength fabricated by electron-beam lithography

被引:46
|
作者
Shiono, T [1 ]
Hamamoto, T
Takahara, K
机构
[1] Matsushita Elect Ind Co Ltd, Storage Media Syst Dev Ctr, Moriguchi, Osaka 5708501, Japan
[2] Osaka Sci & Technol Ctr, Factory Adv Opt Technol, Osaka 5941157, Japan
关键词
D O I
10.1364/AO.41.002390
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
Blazed diffractive optical elements (DOEs) were studied for the violet wavelength by electron-beam lithography. By optimizing electron-beam writing parameters and electron-dose distributions, we fabricated eight kinds of grating (period Lambda = 10-0.54 mum) with excellent blazed structure. It has been demonstrated that the measured diffraction efficiency values agreed well with the rigorous theoretical ones. For the fine period of 0.54 mum, we confirmed a peak appearance of 75.6% (TE) experimentally. A wave aberration as small as similar to0.01lambda (rms) was obtained for the first-order diffracted wave from the fabricated DOEs. Blazed DOEs for the violet wavelength could be used as key devices in a high-density optical disk pickup of the next generation. (C) 2002 Optical Society of America.
引用
收藏
页码:2390 / 2393
页数:4
相关论文
共 50 条
  • [41] MULTICHANNEL DEPTH PROBE FABRICATED USING ELECTRON-BEAM LITHOGRAPHY
    POCHAY, P
    WISE, KD
    ALLARD, LF
    RUTLEDGE, LT
    IEEE TRANSACTIONS ON BIOMEDICAL ENGINEERING, 1979, 26 (04) : 199 - 206
  • [42] A HIGH-EFFICIENCY MULTISTAGE COLLECTOR FOR A LOW QUALITY ELECTRON-BEAM RECOVERY
    BOSCOLO, I
    BRAUTTI, G
    STAGNO, V
    VARIALE, V
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 1989, 275 (01): : 184 - 189
  • [43] DESIGN AND FABRICATION WITH ELECTRON BEAM LITHOGRAPHY OF A DIFFRACTIVE OPTICAL ELEMENT
    Kusko, Mihai
    Dinescu, Adrian
    Cristea, Dana
    Apostol, Dan
    Schiopu, Paul
    UNIVERSITY POLITEHNICA OF BUCHAREST SCIENTIFIC BULLETIN SERIES C-ELECTRICAL ENGINEERING AND COMPUTER SCIENCE, 2009, 71 (04): : 135 - 142
  • [44] Design and fabrication with electron beam lithography of a diffractive optical element
    Kusko, Mihai
    Dinescu, Adrian
    Cristea, Dana
    Apostol, Dan
    Şchiopu, Paul
    UPB Scientific Bulletin, Series C: Electrical Engineering, 2009, 71 (04): : 135 - 142
  • [45] Diffractive optical elements fabricated for beam shaping of high-power diode lasers
    Vogt, Helge
    Biertuempfel, Ralf
    Pawlowski, Edgar
    HIGH-POWER DIODE LASER TECHNOLOGY AND APPLICATIONS VI, 2008, 6876
  • [46] Enhancement of optical properties of CdSe pillars fabricated by the combination of electron-beam lithography and electrochemical deposition
    Chen, YL
    Chen, CC
    Jeng, JC
    Chen, YF
    APPLIED PHYSICS LETTERS, 2004, 85 (07) : 1259 - 1261
  • [48] X-ray multilevel zone plate fabrication by means of electron-beam lithography: Toward high-efficiency performances
    Di Fabrizio, E
    Gentili, M
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 1999, 17 (06): : 3439 - 3443
  • [49] ELECTRON-BEAM FABRICATION AND FOCUSED ION-BEAM INSPECTION OF SUBMICRON STRUCTURED DIFFRACTIVE OPTICAL-ELEMENTS
    DIX, C
    MCKEE, PF
    THURLOW, AR
    TOWERS, JR
    WOOD, DC
    DAWES, NJ
    WHITNEY, JT
    JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 1994, 12 (06): : 3708 - 3711
  • [50] Investigation of SOI photonic crystals fabricated by both electron-beam lithography and nanoimprint lithography
    Belotti, M
    Galli, M
    Bajoni, D
    Andreani, LC
    Guizzetti, G
    Decanini, D
    Chen, Y
    MICROELECTRONIC ENGINEERING, 2004, 73-4 : 405 - 411