Hard Turning of hot work and cold work steels with HiPIMS and DCMS TiAlN coated carbide inserts

被引：7

作者：

Uhlmann, E. ^{[1
]}

Stawiszynski, B. ^{[1
]}

Leyens, C. ^{[2
]}

Heinze, S. ^{[2
]}

Sammler, F. ^{[1
]}

机构：

[1] Tech Univ Berlin, Inst Machine Tools & Factory Management IWF, D-10587 Berlin, Germany

[2] Tech Univ Dresden, Inst Mat Sci IfWW, D-01062 Dresden, Germany

来源：

7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING | 2016年 / 46卷

关键词：

HiPIMS; DCMS; Turning; Hardened Steel; Wear Resistance;

D O I：

10.1016/j.procir.2016.03.231

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Hard machining has grown in importance in recent years, due to the possibility of substituting cost and time intensive grinding processes, but also due to the development of heat and wear resistant cutting materials. Cemented carbide tools offer different substrate compositions, micro and macro geometries and the possibility to deposit a wide range of coatings. By the application of the High Power Impulse Magnetron Sputtering (HiPIMS) coating technology hard, dense and adhesive layers can be deposited. However, the impacting factors on the wear resistance of these coatings has thus far not been studied adequately. In this contribution cemented carbide cutting inserts in combination with different HiPIMS and Direct Current Magnetron Sputtering (DCMS) TiAlN films are studied with regards to their wear behavior in the machining of hardened steels. (C) 2016 Published by Elsevier B.V.

引用

页码：591 / 594

页数：4

共 50 条

[21] Experimental investigations on machinability aspects in finish hard turning of AISI 4340 steel using uncoated and multilayer coated carbide inserts
Sahoo, Ashok Kumar
Sahoo, Bidyadhar
MEASUREMENT, 2012, 45 (08) : 2153 - 2165
[22] Comparative investigation towards machinability improvement in hard turning using coated and uncoated carbide inserts: part I experimental investigation
Kumar, Ramanuj
Sahoo, Ashok Kumar
Mishra, Purna Chandra
Das, Rabin Kumar
ADVANCES IN MANUFACTURING, 2018, 6 (01): : 52 - 70
[23] PVD COATED HOT WORK TOOL STEELS FOR TOOLING APPLICATIONS IN SEMI-SOLID PROCESSING OF STEELS
Isler, Duygu
Birol, Yucel
Urgen, Mustafa
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2010, 3 : 747 - 750
[24] PVD coated hot work tool steels for tooling applications in semi-solid processing of steels
Duygu Isler
Yucel Birol
Mustafa Urgen
International Journal of Material Forming, 2010, 3 : 747 - 750
[25] AlTiN and AlTiON-coated hot work tool steels for tooling in steel thixoforming
Y.BIROL
D.ISLER
TransactionsofNonferrousMetalsSocietyofChina, 2010, 20(S3) (S3) : 1022 - 1028
[26] AlTiN and AlTiON-coated hot work tool steels for tooling in steel thixoforming
Birol, Y.
Isler, D.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 : S1022 - S1028
[27] EFFECTIVENESS OF MINIMUM QUANTITY LUBRICATION (MQL) FOR DIFFERENT WORK MATERIALS WHEN TURNING BY UNCOATED CARBIDE (SNMM AND SNMG) INSERTS
Zaman, Prianka B.
Dhar, N. R.
PROCEEDINGS OF THE 2010 INTERNATIONAL CONFERENCE ON MECHANICAL, INDUSTRIAL, AND MANUFACTURING TECHNOLOGIES (MIMT 2010), 2010, : 209 - 215
[28] Comparative Assessment on Machinability Aspects of AISI 4340 Alloy Steel Using Uncoated Carbide and Coated Cermet Inserts During Hard Turning
Anshuman Das
Akash Mukhopadhyay
S. K. Patel
B. B. Biswal
Arabian Journal for Science and Engineering, 2016, 41 : 4531 - 4552
[29] Comparative Assessment on Machinability Aspects of AISI 4340 Alloy Steel Using Uncoated Carbide and Coated Cermet Inserts During Hard Turning
Das, Anshuman
Mukhopadhyay, Akash
Patel, S. K.
Biswal, B. B.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2016, 41 (11) : 4531 - 4552
[30] Effect of Silicon on Carbide Precipitation after Tempering of H11 Hot Work Steels
Mesquita, R. A.
Barbosa, C. A.
Morales, E. V.
Kestenbach, H. -J.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (02): : 461 - 472

← 1 2 3 4 5 →