Hard Turning of hot work and cold work steels with HiPIMS and DCMS TiAlN coated carbide inserts

被引：7

作者：

Uhlmann, E. ^{[1
]}

Stawiszynski, B. ^{[1
]}

Leyens, C. ^{[2
]}

Heinze, S. ^{[2
]}

Sammler, F. ^{[1
]}

机构：

[1] Tech Univ Berlin, Inst Machine Tools & Factory Management IWF, D-10587 Berlin, Germany

[2] Tech Univ Dresden, Inst Mat Sci IfWW, D-01062 Dresden, Germany

来源：

7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING | 2016年 / 46卷

关键词：

HiPIMS; DCMS; Turning; Hardened Steel; Wear Resistance;

D O I：

10.1016/j.procir.2016.03.231

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Hard machining has grown in importance in recent years, due to the possibility of substituting cost and time intensive grinding processes, but also due to the development of heat and wear resistant cutting materials. Cemented carbide tools offer different substrate compositions, micro and macro geometries and the possibility to deposit a wide range of coatings. By the application of the High Power Impulse Magnetron Sputtering (HiPIMS) coating technology hard, dense and adhesive layers can be deposited. However, the impacting factors on the wear resistance of these coatings has thus far not been studied adequately. In this contribution cemented carbide cutting inserts in combination with different HiPIMS and Direct Current Magnetron Sputtering (DCMS) TiAlN films are studied with regards to their wear behavior in the machining of hardened steels. (C) 2016 Published by Elsevier B.V.

引用

页码：591 / 594

页数：4

共 50 条

[11] Secondary Carbide Precipitation in Low Silicon Hot Work Tool Steels
Mesquita, R. A.
Barbosa, C. A.
Morales, E. V.
Kestenbach, H. J.
ADVANCED MATERIALS FORUM V, PT 1 AND 2, 2010, 636-637 : 612 - 617
[12] Carbide Distribution Effect on Wear Behavior of Cold Work tool Steels
Chiu, Liu-Ho
Liao, Huan-Chen
Lin, Shou-Chi
Pan, Yeong-Tsuen
Liou, Horng-Yih
METALLURGY TECHNOLOGY AND MATERIALS, 2012, 567 : 240 - +
[13] The effect of temperature and sliding distance on coated (CrN, TiAlN) and uncoated nitrided hot-work tool steels against an aluminium alloy
Kalin, M.
Jerina, J.
WEAR, 2015, 330 : 371 - 379
[14] Hard turning using HiPIMS-coated carbide tools: Wear behavior under dry and minimum quantity lubrication (MQL)
Chinchanikar, Satish
Choudhury, S. K.
MEASUREMENT, 2014, 55 : 536 - 548
[15] Hot-worked microstructure and hot workability of cold-work tool steels
Kang, Jun-Yun
Kim, Hoyoung
Son, Dongmin
Kim, Cheolpyo
Park, Soon Keun
Lee, Tae-Ho
MATERIALS CHARACTERIZATION, 2018, 135 : 8 - 17
[16] Investigation of Cryogenically Treated Physical Vapor Deposition TiAlN/NbN-Coated Carbide Inserts in End Milling of Hard Titanium Alloy
Sivalingam, Vinothkumar
Sun, Jie
Selvam, Baskaran
Zheng, Pengwei
Zan, Zhuoliang
JOURNAL OF TESTING AND EVALUATION, 2021, 49 (03) : 1864 - 1878
[17] EMBRITTLEMENT ASSOCIATED WITH COLD WORK AND THE HOT DIP GALVANIZING OF STRUCTURAL-STEELS
MCDONALD, RD
ENGINEERING FRACTURE MECHANICS, 1979, 11 (02) : 468 - 468
[18] Progress in development of coated indexable cemented carbide inserts for machining of iron based work piece materials
Czettl, C.
Pohler, M.
INTERNATIONAL CONFERENCE ON MATERIALS, PROCESSING AND PRODUCT ENGINEERING 2015 (MPPE2015), 2016, 119
[19] Thermodynamic Modelling of Carbide Precipitation in Hot Work Tool Steels with Different Silicon Contents
Farina, Alexandre Bellegard
Mesquita, Rafael Agneli
Goldenstein, Helio
Kestenbach, Hans Juergen
SOLID-SOLID PHASE TRANSFORMATIONS IN INORGANIC MATERIALS, PTS 1-2, 2011, 172-174 : 1171 - +
[20] Comparative investigation towards machinability improvement in hard turning using coated and uncoated carbide inserts: part I experimental investigation
Ramanuj Kumar
Ashok Kumar Sahoo
Purna Chandra Mishra
Rabin Kumar Das
Advances in Manufacturing, 2018, 6 : 52 - 70

← 1 2 3 4 5 →