Hard Turning of hot work and cold work steels with HiPIMS and DCMS TiAlN coated carbide inserts

被引：7

作者：

Uhlmann, E. ^{[1
]}

Stawiszynski, B. ^{[1
]}

Leyens, C. ^{[2
]}

Heinze, S. ^{[2
]}

Sammler, F. ^{[1
]}

机构：

[1] Tech Univ Berlin, Inst Machine Tools & Factory Management IWF, D-10587 Berlin, Germany

[2] Tech Univ Dresden, Inst Mat Sci IfWW, D-01062 Dresden, Germany

来源：

7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING | 2016年 / 46卷

关键词：

HiPIMS; DCMS; Turning; Hardened Steel; Wear Resistance;

D O I：

10.1016/j.procir.2016.03.231

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Hard machining has grown in importance in recent years, due to the possibility of substituting cost and time intensive grinding processes, but also due to the development of heat and wear resistant cutting materials. Cemented carbide tools offer different substrate compositions, micro and macro geometries and the possibility to deposit a wide range of coatings. By the application of the High Power Impulse Magnetron Sputtering (HiPIMS) coating technology hard, dense and adhesive layers can be deposited. However, the impacting factors on the wear resistance of these coatings has thus far not been studied adequately. In this contribution cemented carbide cutting inserts in combination with different HiPIMS and Direct Current Magnetron Sputtering (DCMS) TiAlN films are studied with regards to their wear behavior in the machining of hardened steels. (C) 2016 Published by Elsevier B.V.

引用

页码：591 / 594

页数：4

共 50 条

[1] Cutting performance of coated carbide inserts in hard turning of hardened AISI D2 cold work tool steels
Cakan, Ahmet
Albayrak, Onder
Sanli, Bengi Gozmen
Guven, Onur
Ugurlu, Mustafa
Atmaca, Hatice
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2024, 238 (19) : 9504 - 9513
[2] Substitution of commercially coated tungsten carbide tools in dry cylindrical turning process by HiPIMS coated niobium carbide cutting inserts
Uhlmann, E.
Hinzmann, D.
Kropidlowksi, K.
Meier, P.
Prasol, L.
Woydt, M.
SURFACE & COATINGS TECHNOLOGY, 2018, 354 : 112 - 118
[3] Tool Wear of Carbide Cutting Inserts Coated with TiAlN and AlTiSiN in Finish Turning of Inconel 718
Lisowicz, Joanna
Habrat, Witold
Krupa, Krzysztof
Fieden, Mateusz
ADVANCES IN MANUFACTURING ENGINEERING AND MATERIALS II, ICMEM 2020, 2021, : 226 - 235
[4] EXPERIMENTAL STUDY ON THE SURFACE ROUGHNESS AND OPTIMIZATION OF CUTTING PARAMETERS IN THE HARD TURNING USING BIOCOMPATIBLE TiAlN-COATED AND UNCOATED CARBIDE INSERTS
Dikshit, Mithilesh K. K.
Pathak, Vimal K. K.
Agrawal, Reeya
Saxena, Kuldeep K. K.
Buddhi, Dharam
Malik, Vinayak
SURFACE REVIEW AND LETTERS, 2023,
[5] CARBIDE SEGREGATIONS IN HOT WORK TOOL STEELS
GUMPEL, P
HOOCK, M
ARCHIV FUR DAS EISENHUTTENWESEN, 1984, 55 (10): : 493 - 498
[6] Increasing productivity in hard turning of steels using CVD-coated carbide
Ginting A.
Nouari M.
Bencheikh I.
International Journal of Machining and Machinability of Materials, 2020, 22 (3-4): : 309 - 330
[7] Machinability aspects in dry turning of Ti6Al4V alloy with HiPIMS coated carbide inserts
Joshi, Girish
Kulkarni, Atul
INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2021, 28 (05) : 532 - 540
[8] THE INFLUENCE OF CARBIDE DISTRIBUTION ON THE PROPERTIES OF HOT WORK TOOL STEELS
Karaaslan, Ahmet
Akca, Cem
METAL 2009, CONFERENCE PROCEEDINGS, 2009, : 521 - 524
[9] Influence of the cutting edge preparation method on characteristics and performance of PVD coated carbide inserts in hard turning
Denkena, B.
Koehler, J.
Breidenstein, B.
Abrao, A. M.
Ventura, C. E. H.
SURFACE & COATINGS TECHNOLOGY, 2014, 254 : 447 - 454
[10] Machinability investigations in hard turning of AISI D2 cold work tool steel with conventional and wiper ceramic inserts
Gaitonde, V. N.
Karnik, S. R.
Figueira, Luis
Davim, J. Paulo
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (04): : 754 - 763

← 1 2 3 4 5 →