Fabrication and High Temperature Creep Behaviour of Interpenetrated Nickel-Chromium/Alumina Composites

被引：0
|
作者：
Haeger, Andreas [1 ]
Schell, Karl G. [2 ]
Nagel, Alwin [1 ]
Bucharsky, Ethel C. [2 ]
Oberacker, Rainer [2 ]
Hoffmann, Michael J. [2 ]
机构：
[1] Aalen Univ, Mat Res Inst, D-73430 Aalen, Germany
[2] Karlsruhe Inst Technol, Inst Appl Mat Ceram Mech Engn, D-76131 Karlsruhe, Germany
来源：
ADVANCED ENGINEERING MATERIALS | 2012年 / 14卷 / 09期
关键词：
MATRIX COMPOSITES; MODULUS;
D O I：
10.1002/adem.201200055
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A method to manufacture unique interpenetrating 50?vol% nickelchromium/alumina composites, namely NiCr8020/Al2O3/50pp, is reported. Key process is a high temperature squeeze casting procedure at temperatures above 1500?degrees C used to infiltrate alloy NiCr8020 into porous alumina preforms exhibiting a bimodal pore structure. Microstructure and mechanical properties of this new composite material are presented. Bending creep tests at 1000 and 1150?degrees C are performed. The obtained results are discussed in comparison to a nickel based superalloy. It is shown, that particle preform reinforcement is a promising method to improve creep resistance of nickel based alloys significantly. Due to its outstanding creep resistance, the composite material has a high potential for structural and tribological applications at high temperatures in oxidizing atmospheres.
引用
收藏
页码：795 / 801
页数：7
相关论文
共 50 条
  • [41] Creep characteristics of alumina, nickel aluminate spinel, zirconia composites
    Dillon, R. Peter
    Kim, Dong-Kyu
    Trujillo, Joy E.
    Kriven, Waltraud M.
    Mecartney, Martha L.
    JOURNAL OF MATERIALS RESEARCH, 2008, 23 (02) : 556 - 564
  • [42] High-temperature oxidation of hard alloys based on niobium and titanium carbides with a nickel-chromium binder
    Bodrova, L.G.
    Bodrov, V.P.
    Lazaryuk, V.V.
    Sverkhtverdye Materialy, 2002, (01): : 58 - 66
  • [43] High-temperature corrosion of nickel-chromium alloys in flowing chlorine-water vapor environments
    Tu, JP
    CORROSION, 1997, 53 (05) : 365 - 373
  • [44] INDUSTRIAL-PRODUCTION OF HIGH-QUALITY NICKEL-CHROMIUM RESISTORS WITH CONTROLLED TEMPERATURE COEFFICIENTS OF RESISTANCE
    HEGNER, F
    THIN SOLID FILMS, 1979, 57 (02) : 359 - 362
  • [45] Rhenium doped chromium-alumina composites for high-temperature applications
    Chmielewski, M.
    Pietrzak, K.
    Basista, M.
    Weglewski, W.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2016, 54 : 196 - 202
  • [46] Fabrication and performance of a nickel-chromium (NiCr) igniter integrated with TVS diode for ESD protection
    Liu, Wei
    Ren, Xiao-ming
    Xie, Rui-zhen
    Liu, Lan
    Yu, Ke-xin
    Ji, Xiang-fei
    Ren, Wei
    Chu, En-yi
    AIP ADVANCES, 2023, 13 (03)
  • [47] Investigation on the effect of temperature, pressure and grain size on the creep behavior of nickel-chromium binary alloy through molecular dynamics simulation
    Gowthaman S.
    Jagadeesha T.
    Engineering Research Express, 2021, 3 (02):
  • [48] USE OF NIOBIUM IN DEVELOPMENT OF AIR-CAST NICKEL-CHROMIUM ALLOYS FOR HIGH-TEMPERATURE SERVICE
    HAYNES, FG
    JOURNAL OF THE INSTITUTE OF METALS, 1962, 90 (08): : 311 - &
  • [49] The Oxidation Behaviour of Stainless Steel AISI 409 Coated By Decorative Nickel-Chromium Plating
    Wongpinij, Thipusa
    U-Dom, Theerayut
    Suptrakun, Thamrong
    Puttanasun, Tawesuk
    Pimpan, Channarong
    Nangnoi, Nisit
    Wongpanya, Pornwasa
    JOURNAL OF METALS MATERIALS AND MINERALS, 2012, 22 (01): : 45 - 54
  • [50] KINETICS OF LOW-TEMPERATURE VAPOR CONVERSION OF ETHANE ON A NICKEL-CHROMIUM CATALYST
    MESHENKO, NT
    VESELOV, VV
    SHUB, FS
    TEMKIN, MI
    KINETICS AND CATALYSIS, 1977, 18 (04) : 796 - 800
12345