Fabrication and High Temperature Creep Behaviour of Interpenetrated Nickel-Chromium/Alumina Composites

被引：0
|
作者：
Haeger, Andreas [1 ]
Schell, Karl G. [2 ]
Nagel, Alwin [1 ]
Bucharsky, Ethel C. [2 ]
Oberacker, Rainer [2 ]
Hoffmann, Michael J. [2 ]
机构：
[1] Aalen Univ, Mat Res Inst, D-73430 Aalen, Germany
[2] Karlsruhe Inst Technol, Inst Appl Mat Ceram Mech Engn, D-76131 Karlsruhe, Germany
来源：
ADVANCED ENGINEERING MATERIALS | 2012年 / 14卷 / 09期
关键词：
MATRIX COMPOSITES; MODULUS;
D O I：
10.1002/adem.201200055
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A method to manufacture unique interpenetrating 50?vol% nickelchromium/alumina composites, namely NiCr8020/Al2O3/50pp, is reported. Key process is a high temperature squeeze casting procedure at temperatures above 1500?degrees C used to infiltrate alloy NiCr8020 into porous alumina preforms exhibiting a bimodal pore structure. Microstructure and mechanical properties of this new composite material are presented. Bending creep tests at 1000 and 1150?degrees C are performed. The obtained results are discussed in comparison to a nickel based superalloy. It is shown, that particle preform reinforcement is a promising method to improve creep resistance of nickel based alloys significantly. Due to its outstanding creep resistance, the composite material has a high potential for structural and tribological applications at high temperatures in oxidizing atmospheres.
引用
收藏
页码：795 / 801
页数：7
相关论文
共 50 条
  • [21] A WELDING TECHNIQUE FOR CAST HIGH-CHROMIUM NICKEL-CHROMIUM ALLOYS
    AUCHTERLOUNIE, AJ
    PARRY, PJ
    METAL CONSTRUCTION AND BRITISH WELDING JOURNAL, 1969, 1 (07): : 324 - +
  • [22] Fabrication of carbon nanotube on nickel-chromium alloy wire for high-current field emission
    Yan, Xiao-lu
    Wu, Yu-long
    Wang, Bao-shun
    Zhang, Quan
    Zheng, Rui-ting
    Wu, Xiao-ling
    Cheng, Guo-an
    APPLIED SURFACE SCIENCE, 2018, 450 : 38 - 45
  • [23] A COMPARISON OF SCALING BEHAVIOUR OF PURE IRON-CHROMIUM AND NICKEL-CHROMIUM ALLOYS IN OXYGEN
    WOOD, GC
    HODGKIESS, T
    WHITTLE, DP
    CORROSION SCIENCE, 1966, 6 (3-4) : 129 - +
  • [24] CREEP AND FRACTURE PROPERTIES OF SOME NICKEL-CHROMIUM ALLOYS AT 600 DEGREES C
    DENNISON, JP
    LLEWELLYN, RJ
    WILSHIRE, B
    JOURNAL OF THE INSTITUTE OF METALS, 1967, 95 : 115 - +
  • [25] Effect of a small amount of hydrogen chloride on high temperature oxidation of nickel-chromium alloys
    Akita Univ, Akita, Japan
    Nippon Kinzoku Gakkaishi, 1 (56-63):
  • [26] Effect of a small amount of hydrogen chloride on high temperature oxidation of nickel-chromium alloys
    Sato, Y
    Hara, M
    Shinata, Y
    Narita, T
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1997, 61 (01) : 56 - 63
  • [27] CORROSION BEHAVIOUR OF ELECTROPLATES .I. NICKEL-CHROMIUM ELECTROPLATE ON STEEL
    GURUVIAH, S
    RAJAGOPA.KS
    INDIAN JOURNAL OF TECHNOLOGY, 1966, 4 (02): : 39 - &
  • [28] The temperature variation of the thermoelectric properties and the specific heat of nickel-chromium
    Foster, AW
    PHILOSOPHICAL MAGAZINE, 1934, 18 (119): : 470 - 488
  • [29] Effect of Contact Surface Temperature on Wear of Nickel-Chromium Layer
    Widiyarta, I. M.
    Parwata, I. M.
    Lokantara, I. P.
    Dwipayana
    INNOVATIVE SCIENCE AND TECHNOLOGY IN MECHANICAL ENGINEERING FOR INDUSTRY 4.0, 2019, 2187
  • [30] CREEP BEHAVIOUR OF HIGH NICKEL AND CHROMIUM STAINLESS STEELS FOR FAST BREEDER REACTORS
    LAGNEBORG, R
    OSTBERG, G
    ATTERMO, R
    JERNKONTORETS ANNALER, 1971, 155 (09): : 601 - +
12345