Load-Excursion Failure Analysis of the Gearbox's Input Pinion

被引:0
|
作者
Ning Fenglian [1 ]
机构
[1] AVIC Aviat Powerplant Res Inst, Zhuzhou 412002, Peoples R China
来源
ADVANCES IN POWER TRANSMISSION SCIENCE AND TECHNOLOGY | 2011年 / 86卷
关键词
Gear; Load-excursion; Helix Angle Modify; Failure; Input Pinion;
D O I
10.4028/www.scientific.net/AMM.86.196
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this paper, the failure of gearbox's input pinion was introduced. According to gearbox structure, the factor of load-excursion was analyzed and a method of correcting gear's helix angle was proposed. Finally, the problem was solved by correcting the gear's helix angle and thinking about the influence of the bushes matting under heat conditions. The calculation method of correcting gear helix angle was proven to be valid by other gearbox tests, and provided a reference for correcting the gear's helix angle of other gearbox's.
引用
收藏
页码:196 / 200
页数:5
相关论文
共 50 条
  • [31] Failure Analysis of a Pinion Shaft of Tail Breaker Unit in Rebar Mill
    Neel Kant
    Aditya Sarkar
    Bhushan Rakshe
    Sukanta Sarkar
    Sujoy S. Hazra
    Journal of Failure Analysis and Prevention, 2023, 23 : 1114 - 1126
  • [32] Verification of the operating condition of stationary industrial gearbox through analysis of dynamic signal, measured on the pinion bearing housing
    Baron, Petr
    Kocisko, Marek
    Blasko, Lukas
    Szentivanyi, Patrik
    MEASUREMENT, 2017, 96 : 24 - 33
  • [33] Failure Analysis of a Pinion Shaft of Tail Breaker Unit in Rebar Mill
    Kant, Neel
    Sarkar, Aditya
    Rakshe, Bhushan
    Sarkar, Sukanta
    Hazra, Sujoy S.
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2023, 23 (03) : 1114 - 1126
  • [34] Failure Analysis of Exciter Gearbox of Screen at Sinter Plant
    Jain, Aditya
    Thirumurugan, T.
    Singh, G. R. P.
    Kumar, N. Rajesh
    Mandal, Himangshu S.
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2023, 23 (04) : 1498 - 1505
  • [35] Failure Analysis of Exciter Gearbox of Screen at Sinter Plant
    Aditya Jain
    T. Thirumurugan
    G. R. P. Singh
    N. Rajesh Kumar
    Himangshu S. Mandal
    Journal of Failure Analysis and Prevention, 2023, 23 : 1498 - 1505
  • [36] Analysis on Load Characteristics of High-speed Train Gearbox
    Li G.
    Wang W.
    Yang G.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2018, 54 (04): : 270 - 277
  • [37] Failure Analysis of a Brass Synchronizer Ring in the Gearbox of Vehicle
    Hongchen Gao
    Song Xue
    Yi Ren
    Yi Peng
    Lixuan Zheng
    International Journal of Automotive Technology, 2023, 24 : 493 - 501
  • [38] Failure analysis of an idler gear of diesel engine gearbox
    Yu, Zhiwei
    Xu, Xiaolei
    ENGINEERING FAILURE ANALYSIS, 2006, 13 (07) : 1092 - 1100
  • [39] Failure Analysis of a Brass Synchronizer Ring in the Gearbox of Vehicle
    Gao, Hongchen
    Xue, Song
    Ren, Yi
    Peng, Yi
    Zheng, Lixuan
    INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2023, 24 (02) : 493 - 501
  • [40] Dynamic Analysis of Single Stage Gearbox Focused on Input Parameters Influence
    Prokop, A.
    Kopeckova, B.
    Rehak, K.
    TRANSPORT MEANS 2017, PTS I-III, 2017, : 479 - 484