Load-Excursion Failure Analysis of the Gearbox's Input Pinion

被引：0
|
作者：
Ning Fenglian [1 ]
机构：
[1] AVIC Aviat Powerplant Res Inst, Zhuzhou 412002, Peoples R China
来源：
ADVANCES IN POWER TRANSMISSION SCIENCE AND TECHNOLOGY | 2011年 / 86卷
关键词：
Gear; Load-excursion; Helix Angle Modify; Failure; Input Pinion;
D O I：
10.4028/www.scientific.net/AMM.86.196
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
In this paper, the failure of gearbox's input pinion was introduced. According to gearbox structure, the factor of load-excursion was analyzed and a method of correcting gear's helix angle was proposed. Finally, the problem was solved by correcting the gear's helix angle and thinking about the influence of the bushes matting under heat conditions. The calculation method of correcting gear helix angle was proven to be valid by other gearbox tests, and provided a reference for correcting the gear's helix angle of other gearbox's.
引用
收藏
页码：196 / 200
页数：5
相关论文
共 50 条
  • [21] Failure Analysis of a High-Speed Pinion Shaft
    Stevenson, M. E.
    McDougall, J. L.
    Bowman, R. D.
    Herman, R. L.
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2005, 5 (02) : 48 - 54
  • [22] Early Failure Study of Gearbox Input Shaft Bearing on Damage Rate
    Liu Zongqi
    Li Zhiyuan
    Wang Yongguo
    Xia Guang
    PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON ELECTRONIC & MECHANICAL ENGINEERING AND INFORMATION TECHNOLOGY (EMEIT-2012), 2012, 23
  • [23] FAILURE ANALYSIS OF A DIFFERENTIAL GEAR PINION FOR WHEEL LOADERS
    Croccolo, Dario
    De Agostinis, Massimiliano
    Fini, Stefano
    Olmi, Giorgio
    IRF2016: 5TH INTERNATIONAL CONFERENCE INTEGRITY-RELIABILITY-FAILURE, 2016, : 1149 - 1160
  • [24] Failure Analysis of High-Speed Pinion Gear Shaft
    Muhammad, W.
    Ejaz, N.
    Rizvi, S. A.
    JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2009, 9 (05) : 470 - 478
  • [25] Failure Analysis of a Two High Gearbox Shaft
    Moolwan, Charnont
    Netpu, Samroeng
    SOCIAL AND BEHAVIORAL SCIENCES SYMPOSIUM, 2014, 88 : 154 - 163
  • [26] Failure Analysis of Output Shaft in the Gearbox Transmission
    Xu, Wujiao
    Chen, Yanfei
    Wang, Jian
    Wang, Tao
    ADVANCES IN POWER TRANSMISSION SCIENCE AND TECHNOLOGY, 2011, 86 : 598 - +
  • [27] Detection of a helicopter input pinion bearing fault using interstitial envelope analysis
    Aerospace Engineering and Mechanics Department, University of Alabama, P.O. Box 870280, Tuscaloosa, AL 35487-0280, United States
    不详
    不详
    Int. J. Acoust. Vibr., 2006, 3 (137-143):
  • [28] The failure analysis of the repeat geartooth breakage in a 40 MW steam turbine load gearbox and the butterfly in the carburized case
    Liu, William
    ENGINEERING FAILURE ANALYSIS, 2014, 46 : 9 - 17
  • [29] Partial Load: A Key Factor Resulting in the Failure of Gear in the Wind Turbine Gearbox
    Wang Q.
    Zhu Y.
    Zhang Z.
    Fu C.
    Dong C.
    Su H.
    Journal of Failure Analysis and Prevention, 2016, 16 (1) : 109 - 122
  • [30] Failure analysis of a pinion of the jacking system of a jack-up platform
    Cao, Y. G.
    Zhang, S. H.
    ENGINEERING FAILURE ANALYSIS, 2013, 33 : 212 - 221
12345