Geometrical Accuracy of Threaded Elements Manufacture by 3D Printing Process

被引：4

作者：

Budzik, Grzegorz ^{[1
]}

Dziubek, Tomasz ^{[1
]}

Kawalec, Andrzej ^{[1
]}

Turek, Pawel ^{[1
]}

Bazan, Anna ^{[1
]}

Debski, Mariusz ^{[1
]}

Jozwik, Jerzy ^{[2
]}

Polinski, Przemyslaw ^{[3
]}

Kielbicki, Mateusz ^{[3
]}

Kochmanski, Lukasz ^{[3
]}

Oleksy, Mariusz ^{[4
]}

Cebulski, Jozef ^{[5
]}

Paszkiewicz, Andrzej ^{[6
]}

Kuric, Ivan ^{[7
]}

机构：

[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Al Powstancow Warszawy 8, PL-35029 Rzeszow, Poland

[2] Lublin Univ Technol, Fac Mech Engn, Dept Prod Engn, ul Nadbystrzycka 36, PL-20618 Lublin, Poland

[3] Tech Sci Rzeszow Univ Technol, Doctoral Sch Engn, Al Powstancow Warszawy 12, PL-35959 Rzeszow, Poland

[4] Rzeszow Univ Technol, Fac Chem, Al Powstancow Warszawy 6, PL-35959 Rzeszow, Poland

[5] Univ Rzeszow, Inst Phys, Al Tadeusza Rejtana 16C, PL-35310 Rzeszow, Poland

[6] Rzeszow Univ Technol, Fac Elect Engn & Comp Sci, ul Wincentego Pola 2, PL-35021 Rzeszow, Poland

[7] Univ Zilina, Fac Mech Engn, Dept Automation & Prod Syst, Slovakia authors, Univerzitna 8215, Zilina 01026, Slovakia

来源：

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2023年 / 17卷 / 01期

关键词：

additive manufacturing; threaded elements; surface roughness; computer measurement system;

D O I：

10.12913/22998624/157393

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Additive processes allow for almost any manufacturing of screw-threaded joint elements. However, this requires knowledge of the geometrical relationships of a threaded itself and the strength of materials from which the screw -threaded joint is made. Thanks to the development of research models and conducting tests related to dimensional accuracy and surface roughness, it was possible to test the models made by MEX process of ABS-M30, PLA, ABS, PETG materials, and PolyJet process from RGD720 polymer material.In the case of measurements carried out on the MarSurf XC20 system, the internal and external thread profile was obtained.Measurements of the surface roughness of the printed models were made using the Taylor Hobson TalyScan 150 profilometer. Based on the obtained surface, following the ISO 25178-2 standard, selected parameters were determined.

引用

页码：35 / 45

页数：11

共 50 条

[31] A Process Parameter Design Method for Improving the Filament Diameter Accuracy of Extrusion 3D Printing
Yu, Kaicheng
Gao, Qiang
Lu, Lihua
Zhang, Peng
MATERIALS, 2022, 15 (07)
[32] CONTINUOUS FIBER 3D PRINTING Development and Application of Continuous Fiber 3D Printing Process for Aerospace
Koon, Bob
Stranberg, Nathan
SAMPE JOURNAL, 2021, 57 (06) : 10 - 18
[33] Multivariate evaluation of the printing process on 3D printing of rice protein
Barrios-Rodriguez, Yeison Fernando
Igual, Marta
Martinez-Monzo, Javier
Garcia-Segovia, Purificacion
FOOD RESEARCH INTERNATIONAL, 2024, 176
[34] Specifying colour and maintaining colour accuracy for 3D printing
Parraman, Carinna
Walters, Peter
Reid, Brendan
Huson, David
THREE-DIMENSIONAL IMAGE CAPTURE AND APPLICATIONS 2008, 2008, 6805
[35] Modular, Discrete Micromixer Elements Fabricated by 3D Printing
Bhargava, Krisna C.
Ermagan, Roya
Thompson, Bryant
Friedman, Andrew
Malmstadt, Noah
MICROMACHINES, 2017, 8 (05): : 137
[36] Interstitial elements created via metal 3D printing
Guo, Xiaolei
Huang, Hsien-Lien
Zhu, Menglin
Hariharan, Karthikeyan
Chien, Szu-Chia
Huynh, Ngan
Hwang, Jinwoo
Windl, Wolfgang
Taylor, Christopher D.
Schindelholz, Eric J.
Frankel, Gerald S.
MATERIALS TODAY, 2023, 66 : 92 - 104
[37] FDM 3D PRINTING TECHNOLOGY IN MANUFACTURING COMPOSITE ELEMENTS
Dudek, P.
ARCHIVES OF METALLURGY AND MATERIALS, 2013, 58 (04) : 1415 - 1418
[38] 3D Printing and Integration: From Photonic Elements to Devices
Juodkazis, S.
2016 PROGRESS IN ELECTROMAGNETICS RESEARCH SYMPOSIUM (PIERS), 2016, : 51 - 51
[39] Effective use of 3D printing in the innovation process
Candi, Marina
Beltagui, Ahmad
TECHNOVATION, 2019, 80-81 : 63 - 73
[40] PROSUMER AND 3D PRINTING: DEMOCRATIZATION OF THE CREATIVE PROCESS
Val Fiel, Monica
REVISTA 180, 2016, (37): : 16 - 21

← 1 2 3 4 5 →