Geometrical Accuracy of Threaded Elements Manufacture by 3D Printing Process

被引：4

作者：

Budzik, Grzegorz ^{[1
]}

Dziubek, Tomasz ^{[1
]}

Kawalec, Andrzej ^{[1
]}

Turek, Pawel ^{[1
]}

Bazan, Anna ^{[1
]}

Debski, Mariusz ^{[1
]}

Jozwik, Jerzy ^{[2
]}

Polinski, Przemyslaw ^{[3
]}

Kielbicki, Mateusz ^{[3
]}

Kochmanski, Lukasz ^{[3
]}

Oleksy, Mariusz ^{[4
]}

Cebulski, Jozef ^{[5
]}

Paszkiewicz, Andrzej ^{[6
]}

Kuric, Ivan ^{[7
]}

机构：

[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Al Powstancow Warszawy 8, PL-35029 Rzeszow, Poland

[2] Lublin Univ Technol, Fac Mech Engn, Dept Prod Engn, ul Nadbystrzycka 36, PL-20618 Lublin, Poland

[3] Tech Sci Rzeszow Univ Technol, Doctoral Sch Engn, Al Powstancow Warszawy 12, PL-35959 Rzeszow, Poland

[4] Rzeszow Univ Technol, Fac Chem, Al Powstancow Warszawy 6, PL-35959 Rzeszow, Poland

[5] Univ Rzeszow, Inst Phys, Al Tadeusza Rejtana 16C, PL-35310 Rzeszow, Poland

[6] Rzeszow Univ Technol, Fac Elect Engn & Comp Sci, ul Wincentego Pola 2, PL-35021 Rzeszow, Poland

[7] Univ Zilina, Fac Mech Engn, Dept Automation & Prod Syst, Slovakia authors, Univerzitna 8215, Zilina 01026, Slovakia

来源：

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL | 2023年 / 17卷 / 01期

关键词：

additive manufacturing; threaded elements; surface roughness; computer measurement system;

D O I：

10.12913/22998624/157393

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Additive processes allow for almost any manufacturing of screw-threaded joint elements. However, this requires knowledge of the geometrical relationships of a threaded itself and the strength of materials from which the screw -threaded joint is made. Thanks to the development of research models and conducting tests related to dimensional accuracy and surface roughness, it was possible to test the models made by MEX process of ABS-M30, PLA, ABS, PETG materials, and PolyJet process from RGD720 polymer material.In the case of measurements carried out on the MarSurf XC20 system, the internal and external thread profile was obtained.Measurements of the surface roughness of the printed models were made using the Taylor Hobson TalyScan 150 profilometer. Based on the obtained surface, following the ISO 25178-2 standard, selected parameters were determined.

引用

页码：35 / 45

页数：11

共 50 条

[21] ADAPTIVE SLICING IN 3D PRINTING PROCESS
Rasovic, Nebojsa
Obad, Milenko
MACHINE AND INDUSTRIAL DESIGN IN MECHANICAL ENGINEERING, SEVENTH INTERNATIONAL SYMPOSIUM, KOD 2012, 2012, : 243 - +
[22] Research Progress in Design and Manufacture of Graphene 3D Electrodes Based on 3D Printing Technology
Lu Z.
Li J.
Li S.
Miao K.
Lou X.
Li D.
Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2021, 57 (23): : 169 - 181
[23] Investigations of the Geometrical Accuracy of Handheld 3D Scanning Systems
Kersten, Thomas P.
Przybilla, Heinz-Juergen
Lindstaedt, Maren
PHOTOGRAMMETRIE FERNERKUNDUNG GEOINFORMATION, 2016, (5-6): : 271 - 283
[24] Design-driven manufacture: 3D printing is reshaping industry
Photonics Spectra, 10 (40-45):
[25] 3D printing as key technology in the manufacture of individual orthodontic equipment
Paehl, R.
VDI Berichte, 2018, (4352): : 9 - 13
[26] Generative Design and Integrated 3D Printing Manufacture of Cross Joints
Han, Leyu
Du, Wenfeng
Xia, Zhuang
Gao, Boqing
Yang, Mijia
MATERIALS, 2022, 15 (14)
[27] Design-Driven Manufacture: 3D Printing is Reshaping Industry
Freebody, Marie
PHOTONICS SPECTRA, 2015, 49 (10) : 40 - 45
[28] Research on the Use of 3D Printing for the Manufacture of Scintillation Detector Housing
Veresnikova, A. V.
Gavrilyuk, Yu. M.
Kazalov, V. V.
Kochkarov, M. M.
PHYSICS OF ATOMIC NUCLEI, 2024, 87 (SUPPL2) : S257 - S263
[29] Energy consumption and carbon footprint of 3D printing in pharmaceutical manufacture
Elbadawi, Moe
Basit, Abdul W.
Gaisford, Simon
INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2023, 639
[30] Quality Assurance and Printing Accuracy Analysis of 3D Printing in Medical Applications
Chen, Joshua Ray
Morris, Jonathan
Wentworth, Adam
Sears, Victoria
Duit, Andrew
Erie, Eric
McGee, Kiaran
Leng, Shuai
MEDICAL IMAGING 2022: IMAGING INFORMATICS FOR HEALTHCARE, RESEARCH, AND APPLICATIONS, 2022, 12037

← 1 2 3 4 5 →