On winding reconstruction method for six-phase motor with single-phase winding open-circuit faults

被引:3
|
作者
Guo, Liyan [1 ]
Jin, Xinchang [1 ]
Wang, Huimin [1 ]
机构
[1] Tiangong Univ, Sch Elect Engn, Tianjin, Peoples R China
基金
中国国家自然科学基金;
关键词
Six -phase PMSM; Single phase open -circuit fault; Torque ripple; Winding reconfiguration; Armature current optimization; Fault operation; ANALYTICAL-MODEL; MACHINES;
D O I
10.1016/j.jmmm.2023.171365
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Single-phase winding fault in six-phase permanent magnet synchronous motor (PMSM) will cause problems with reduced torque performance. For this problem, this paper analyses the reasons for the increase of torque ripple under single-phase winding open-circuit fault condition taking an 18-slot/10-pole (18S10P) six-phase surface mounted permanent magnet synchronous motor (SPMSM) as an example. Then, a torque performance improvement method by redistributing healthy phase windings to reconstruct the stator magnetic field is proposed in this paper. The proposed method not only can significantly reduce torque ripple caused by winding open-circuit faults but also can maintain a high average torque value. Moreover, this method is suitable for lots of six-phase motors with different pole-slot combinations. At last, considering the significant impact of harmonic contents in stator magnetic field on torque performance, an optimization method for armature current is proposed, which can decrease the torque ripple further. The simulation results by finite element analysis (FEA) show that the proposed method has significant superiority in motor fault operation.
引用
收藏
页数:9
相关论文
共 50 条
  • [41] Determining the single-phase ground fault currents in the stator winding of an induction motor
    Novozhilov, A.N.
    2001, Energoatomizdat
  • [42] A Driver for the Single-Phase Brushless DC Fan Motor With Hybrid Winding Structure
    Chen, Yie-Tone
    Chiu, Chun-Lung
    Jhang, Yi-Ruey
    Tang, Zong-Hong
    Liang, Ruey-Hsun
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2013, 60 (10) : 4369 - 4375
  • [43] A Three-Phase Integrated Battery Charger for EVs Based on Six-Phase Open-End Winding Machine
    Raherimihaja, Henri Josephson
    Zhang, Qianfan
    Na, Tuopu
    Shao, Meng
    Wang, Jinxin
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2020, 35 (11) : 12122 - 12132
  • [44] Open-Circuit Fault Detection of Asymmetrical Six-phase Induction Motor Fed from Z-Source Inverter
    Hammad, Rania
    Dabour, Sherif M.
    Rashad, Essam M.
    2019 21ST INTERNATIONAL MIDDLE EAST POWER SYSTEMS CONFERENCE (MEPCON 2019), 2019, : 1216 - 1222
  • [45] Six-Phase Space Vector PWM under Stator One-Phase Open-Circuit Fault Condition
    Zheng, Jian
    Huang, Shoudao
    Rong, Fei
    Lye, Mingcheng
    ENERGIES, 2018, 11 (07):
  • [46] Open-Circuit Fault-Tolerant Control of a Six-Phase Asymmetric Permanent Magnet Synchronous Motor Drive System
    Liu, Linyin
    Zhang, Qinghui
    ELECTRONICS, 2023, 12 (05)
  • [47] A Novel Multilevel Quad-Inverter Configuration for Quasi Six-Phase Open-Winding Converter
    Padmanaban, Sanjeevikumar
    Blaabjerg, Frede
    Wheeler, Patrick William
    Siano, Pierluigi
    Martirano, Luigi
    Szczesniak, Pawel
    2016 10TH INTERNATIONAL CONFERENCE ON COMPATIBILITY, POWER ELECTRONICS AND POWER ENGINEERING (CPE-POWERENG), 2016, : 325 - 330
  • [48] Armature MMF Reconfiguration Method of Six-Phase Integral-Slot PMSMs for Zero-Order Vibration Reduction Under Open-Circuit Faults
    Ji, Jinghua
    Zhou, Yunhan
    Tao, Tao
    Li, Zongwang
    Zhao, Wenxiang
    IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION, 2024, 10 (01): : 421 - 431
  • [49] FOC Transformation for Single Open-Phase Faults in the Five-Phase Open-End Winding Topology
    Priestley, Matthew
    Farshadnia, Mohammad
    Fletcher, John Edward
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2020, 67 (02) : 842 - 851
  • [50] A three-phase induction motor with power electronic controlled single-phase auxiliary stator winding
    Nicolae, D. V.
    Jimoh, A. A.
    2007 IEEE POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-6, 2007, : 98 - 103