On winding reconstruction method for six-phase motor with single-phase winding open-circuit faults

被引:3
|
作者
Guo, Liyan [1 ]
Jin, Xinchang [1 ]
Wang, Huimin [1 ]
机构
[1] Tiangong Univ, Sch Elect Engn, Tianjin, Peoples R China
基金
中国国家自然科学基金;
关键词
Six -phase PMSM; Single phase open -circuit fault; Torque ripple; Winding reconfiguration; Armature current optimization; Fault operation; ANALYTICAL-MODEL; MACHINES;
D O I
10.1016/j.jmmm.2023.171365
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Single-phase winding fault in six-phase permanent magnet synchronous motor (PMSM) will cause problems with reduced torque performance. For this problem, this paper analyses the reasons for the increase of torque ripple under single-phase winding open-circuit fault condition taking an 18-slot/10-pole (18S10P) six-phase surface mounted permanent magnet synchronous motor (SPMSM) as an example. Then, a torque performance improvement method by redistributing healthy phase windings to reconstruct the stator magnetic field is proposed in this paper. The proposed method not only can significantly reduce torque ripple caused by winding open-circuit faults but also can maintain a high average torque value. Moreover, this method is suitable for lots of six-phase motors with different pole-slot combinations. At last, considering the significant impact of harmonic contents in stator magnetic field on torque performance, an optimization method for armature current is proposed, which can decrease the torque ripple further. The simulation results by finite element analysis (FEA) show that the proposed method has significant superiority in motor fault operation.
引用
收藏
页数:9
相关论文
共 50 条
  • [31] Multidirectional Power Flow Control among Double Winding Six-Phase Induction Machine Winding Sets
    Abduallah, A. A.
    Dordevic, O.
    Jones, M.
    IECON 2017 - 43RD ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2017, : 8001 - 8006
  • [32] A New Single Tooth Winding Layout for a Single-Phase Induction Motor with Segmented Stator
    Abdel-Khalik, Ayman S.
    Diab, Mohamed S.
    Ahmed, Shehab
    Massoud, Ahmed M.
    IECON 2015 - 41ST ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2015, : 102 - 107
  • [33] A Comparative Study of Three Winding Configurations for Six-Phase Induction Motors
    Kalas, Basant A.
    Refaat, Ahmed
    Fawzi, Mahmoud
    Abdel-Khalik, Ayman Samy
    ENGINEERING SOLUTIONS TOWARD SUSTAINABLE DEVELOPMENT, ESSD 2023, 2024, : 669 - 686
  • [34] Space Vector Modulation for Six-Phase Open-End Winding PMSM Motor Drives with Common Mode Voltage Suppression
    Mounir, Mekasser
    Qiang, Gao
    Cai, Xu
    IECON 2017 - 43RD ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, 2017, : 3865 - 3871
  • [35] Effects of Winding Connection on Performance of a Six-Phase Switched Reluctance Machine
    Deng, Xu
    Mecrow, Barrie
    Martin, Richard
    Gadoue, Shady
    IEEE TRANSACTIONS ON ENERGY CONVERSION, 2018, 33 (01) : 166 - 178
  • [36] SHORT-CIRCUIT CURRENTS IN UNIT CONSISTING OF ″SIX-PHASE TURBOGENERATOR AND THREE-WINDING TRANSFORMER″ .
    Galishnikov, Yu.P.
    Insebaev, T.A.
    Soviet electrical engineering, 1978, 49 (08): : 21 - 26
  • [37] Effect of Winding Configuration on Six-Phase Induction Machine Parameters and Performance
    Abdel-Khalik, Ayman S.
    Abdel-Majeed, Mahmoud S.
    Ahmed, Shehab
    IEEE ACCESS, 2020, 8 (08): : 223009 - 223020
  • [38] Starting characteristics by auxiliary winding sequence control for a single-phase induction motor
    Chosun Univ, Kwangju, Korea, Republic of
    IECON Proc, (1222-1227):
  • [39] A new type single-phase induction motor with negative sequence compensatory winding
    Zhong, Hui
    Wang, Xiuhe
    Leng, Xuemei
    Wang, Daohan
    ICIEA 2007: 2ND IEEE CONFERENCE ON INDUSTRIAL ELECTRONICS AND APPLICATIONS, VOLS 1-4, PROCEEDINGS, 2007, : 82 - +
  • [40] Starting characteristics by auxiliary winding sequence control for a single-phase induction motor
    Baek, HL
    Oh, KG
    Sung, KM
    Park, SK
    Lim, YS
    Cha, IS
    Park, HA
    PROCEEDINGS OF THE 1996 IEEE IECON - 22ND INTERNATIONAL CONFERENCE ON INDUSTRIAL ELECTRONICS, CONTROL, AND INSTRUMENTATION, VOLS 1-3, 1996, : 1222 - 1227