Poly-Si/a-Si/4H-SiC p-n heterojunction broadband photodetector prepared by magnetron sputtering

被引:0
|
作者
Li, Zihao [1 ]
Zhang, Mingkun [1 ,2 ]
Fu, Zhao [1 ]
Zhang, Zeyang [1 ]
Wu, Shaoxiong [1 ]
Zhang, Yuning [1 ]
Lin, Dingqu [1 ]
Hong, Rongdun [1 ,3 ]
Cai, Jiafa [1 ,3 ]
Chen, Xiaping [1 ,3 ]
Zhang, Feng [1 ,3 ]
机构
[1] Xiamen Univ, Coll Phys Sci & Technol, Dept Phys, Xiamen 361005, Peoples R China
[2] Xiamen Univ, Sch Elect Sci & Engn, Peoples Republicof China, Xiamen 361005, Peoples R China
[3] Jiujiang Res Inst Xiamen Univ, Jiujiang 332000, Peoples R China
基金
中国国家自然科学基金;
关键词
poly-Si/a-Si/4H-SiC heterojunction; broadband photodetector; energy band diagram; ULTRAVIOLET; PHOTODIODES;
D O I
10.1088/1361-6463/ad2bdb
中图分类号
O59 [应用物理学];
学科分类号
摘要
With the increasing complexity of scenarios, there is a growing need for broadband photodetectors (PDs). In this work, we report a polycrystalline-Si (poly-Si)/amorphous-Si (a-Si)/4H-SiC p-n heterojunction PD with efficient response in a broad spectral range of ultraviolet-visible-near-infrared. The poly-Si/a-Si/4H-SiC heterojunction was achieved by magnetron sputtering and annealing. The fabricated heterojunction device has a low dark current of 1 pA at -40 V and a fast response time of 3 ns due to the outstanding rectification characteristics of the heterojunction combined with narrow bandgap and wide bandgap material. In addition, the carrier behavior of the heterojunction exposed to broadband light is analyzed in detail by constructing the energy band diagram.
引用
收藏
页数:8
相关论文
共 50 条
  • [1] High doped MBE Si p-n and n-n heterojunction diodes on 4H-SiC
    Perez-Tomas, A.
    Jennings, M. R.
    Davis, M.
    Shah, V.
    Grasby, T.
    Covington, J. A.
    Mawby, P. A.
    MICROELECTRONICS JOURNAL, 2007, 38 (12) : 1233 - 1237
  • [2] Characterization of 4H-SiC PMOSFET with P+ Poly-Si Gate
    Hung, Chia-Lung
    Tsui, Bing-Yue
    2023 INTERNATIONAL VLSI SYMPOSIUM ON TECHNOLOGY, SYSTEMS AND APPLICATIONS, VLSI-TSA/VLSI-DAT, 2023,
  • [3] Theoretical and experimental investigations of barrier height inhomogeneities in poly-Si/4H-SiC heterojunction diodes
    Triendl, F.
    Pfusterschmied, G.
    Pobegen, G.
    Konrath, J. P.
    Schmid, U.
    SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 2020, 35 (11)
  • [4] Barrier height tuning by inverse sputter etching at poly-Si/4H-SiC heterojunction diodes
    Triendl, F.
    Pfusterschmied, G.
    Schwarz, S.
    Pobegen, G.
    Konrath, J. P.
    Schmid, U.
    SEMICONDUCTOR SCIENCE AND TECHNOLOGY, 2021, 36 (05)
  • [5] Modeling of Boron Diffusion and Segregation in Poly-Si/4H-SiC Structures
    Mochizuki, Kazuhiro
    Shimizu, Haruka
    Yokoyama, Natsuki
    SILICON CARBIDE AND RELATED MATERIALS 2009, PTS 1 AND 2, 2010, 645-648 : 243 - +
  • [6] Novel Low VON Poly-Si/4H-SiC Heterojunction Diode using Energy Barrier Height Control
    Yamagami, Shigeharu
    Hayashi, Tetsuya
    Hoshi, Masakatsu
    SILICON CARBIDE AND RELATED MATERIALS 2011, PTS 1 AND 2, 2012, 717-720 : 1005 - 1008
  • [7] Effects of hydrogen on poly- and nano-crystallization of a-Si:H prepared by RF magnetron sputtering
    Seo, Ji-Min
    Jeong, Min-Chang
    Myoung, Jae-Min
    JOURNAL OF CRYSTAL GROWTH, 2006, 295 (02) : 119 - 123
  • [8] The preparation and Optoelectronic Characteristics of the p-n Si/SiC heterojunction
    Zang, Yuan
    Chen, Zhiming
    Li, Lianbi
    Zhao, Shunfeng
    2009 IEEE INTERNATIONAL CONFERENCE OF ELECTRON DEVICES AND SOLID-STATE CIRCUITS (EDSSC 2009), 2009, : 306 - 308
  • [9] Characterization of AZO/p-Si heterojunction prepared by DC magnetron sputtering
    Bo, He
    Quan, Ma Zhong
    Jing, Xu
    Lei, Zhao
    Sheng, Zhang Nan
    Feng, Li
    Cheng, Shen
    Ling, Shen
    Yue, Zhou Cheng
    Shan, Yu Zheng
    Ting, Yin Yan
    MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING, 2009, 12 (06) : 248 - 252
  • [10] Process investigation of a-Si:H thin films prepared by DC magnetron sputtering
    Liu, Chunling
    Wang, Chunwu
    Yao, Yanping
    Zhang, Jing
    Qiao, Zhongliang
    Huang, Bo
    Wang, Yuxia
    Bo, Baoxue
    LASERS IN MATERIAL PROCESSING AND MANUFACTURING III, 2008, 6825