EVALUATION OF THE EFFECT OF ELEVATED TEMPERATURE AND PRELIMINARY THERMAL AGING ON THE RESIDUAL MECHANICAL PROPERTIES OF A STRUCTURAL FIBERGLASS USING THE SIGNALS OF ACOUSTIC EMISSION

被引:2
|
作者
Lobanov, D. S. [1 ]
Lunegova, E. M. [1 ]
机构
[1] Perm Natl Res Polytech Univ, Perm, Russia
关键词
fiberglass; thermal aging; acoustic emission; uniaxial tension; interlaminar shear; BEHAVIOR; WATER;
D O I
10.1007/s11029-023-10084-z
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The paper presents the results of mechanical tests on an aviation structural fiberglass based on a VPS-48 prepreg during quasi-static tests in the uniaxial tension and interlaminar shear. The results of studies on the effect of elevated temperature and preliminary thermal aging on the residual mechanical properties of the material were shown. Results of a preliminary thermal aging (under different regimes) on the mechanical characteristics, the nature of deformation and the implementation of various mechanisms of destruction the composite during interlaminar shear tests were obtained. The laws of changes in the properties of the thermally aged fiberglass during tensile and interlaminar shear tests were studied on the basis of a comprehensive analysis of its mechanical characteristics and AE signals. The time dependences of AE signal parameters for fiberglass specimens were obtained. The paper illustrates distributions of the frequency of spectral maximum of acoustic emission signals obtained after the destruction of specimens with different regimes of preliminary thermal aging presented graphically. An analysis of the microstructure of the surface of specimens before and after a preliminary thermal aging was carried out.
引用
收藏
页码:101 / 114
页数:14
相关论文
共 50 条
  • [41] Effect of Deposition Temperature on the Surface, Structural, and Mechanical Properties of HfO2 Using Chemical Vapor Deposition (CVD)
    Bi, Mengran
    Zhu, Junyu
    Luo, Yuan
    Cai, Hongzhong
    Li, Xuming
    Wang, Xian
    Wei, Yan
    Wang, Xiao
    Hu, Changyi
    Hu, Jinquan
    Zhang, Guixue
    Wang, Xingqiang
    Zhang, Xuxiang
    COATINGS, 2022, 12 (11)
  • [42] Effect of Temperature Field and Mechanical Properties of Casting on Prediction of Hot Tearing Tendency Using FEM Thermal Stress Analysis
    Takai, Ryosuke
    Tsunoda, Tatsuya
    Kawada, Yasutaka
    Hirohara, Rei
    Okane, Toshimitsu
    Yoshida, Makoto
    MATERIALS TRANSACTIONS, 2018, 59 (08) : 1333 - 1340
  • [43] The effect of thermal aging degradation of CFRP composite on its mechanical properties using destructive and non-destructive methods and the DIC system
    Golewski, P.
    Sadowski, T.
    Knec, M.
    Budka, M.
    POLYMER TESTING, 2023, 118
  • [44] Rate effect on mechanical properties of hydraulic concrete flexural-tensile specimens under low loading rates using acoustic emission technique
    Su, Huaizhi
    Hu, Jiang
    Tong, Jianjie
    Wen, Zhiping
    ULTRASONICS, 2012, 52 (07) : 890 - 904
  • [45] Evaluation of residual mechanical properties of steel fiber-reinforced reactive powder concrete after exposure to high temperature using nondestructive testing
    Hou, Xiaomeng
    Abid, Muhammad
    Zheng, Wenzhong
    Waqar, Ghulam Qadir
    PERFORMANCE OF MATERIALS AND STRUCTURES UNDER EXTREME CONDITIONS, 2017, 210 : 588 - 596
  • [46] Investigation of the Effect of Ageing Temperature on a Set of Steel 15NiCuMoNb5 (WB36) Service Properties. Part III. Effect of Thermal Aging on Mechanical Properties and Critical Brittleness Temperature
    Grin, E.A.
    Sarkisyan, V.A.
    Zelenskii, A.V.
    Pchelintsev, A.V.
    Power Technology and Engineering, 2024, 58 (02) : 276 - 283
  • [47] Effect of ambient-temperature and high-temperature electron-beam radiation on the structural, thermal, mechanical, and dynamic mechanical properties of injection-molded polyamide-6,6
    Sengupta, Rajatendu
    Sabharwal, S.
    Tikku, V.K.
    Somani, Alok K.
    Chaki, Tapan K.
    Bhowmick, Anil K.
    Journal of Applied Polymer Science, 1600, 99 (04): : 1633 - 1644
  • [48] Effect of ambient-temperature and high-temperature electron-beam radiation on the structural, thermal, mechanical, and dynamic mechanical properties of injection-molded polyamide-6,6
    Sengupta, R
    Sabharwal, S
    Tikku, VK
    Somani, AK
    Chaki, TK
    Bhowmick, AK
    JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 99 (04) : 1633 - 1644
  • [49] Study of the effect of synthesis temperature and thermal aging on structural, dielectric properties and phase composition in NiO/NiAl2O4 composite ceramics
    Shakirzyanov, Rafael, I
    Borgekov, Daryn B.
    Garanin, Yuriy A.
    Kozlovskiy, Artem L.
    Volodina, Natalia O.
    Shlimas, Dmitriy, I
    Zdorovets, Maxim, V
    MATERIALS RESEARCH EXPRESS, 2024, 11 (07)
  • [50] Investigation of the Effect of Nanosilica on Rheological, Thermal, Mechanical, Structural, and Piezoelectric Properties of Poly(vinylidene fluoride) Nanofibers Fabricated Using an Electrospinning Technique
    Haddadi, Seyyed Arash
    Ramazani, Ahmad S. A.
    Talebi, Soroush
    Fattahpour, Seyyedfaridoddin
    Hasany, Masoud
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2017, 56 (44) : 12596 - 12607