EVALUATION OF THE EFFECT OF ELEVATED TEMPERATURE AND PRELIMINARY THERMAL AGING ON THE RESIDUAL MECHANICAL PROPERTIES OF A STRUCTURAL FIBERGLASS USING THE SIGNALS OF ACOUSTIC EMISSION

被引:2
|
作者
Lobanov, D. S. [1 ]
Lunegova, E. M. [1 ]
机构
[1] Perm Natl Res Polytech Univ, Perm, Russia
关键词
fiberglass; thermal aging; acoustic emission; uniaxial tension; interlaminar shear; BEHAVIOR; WATER;
D O I
10.1007/s11029-023-10084-z
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The paper presents the results of mechanical tests on an aviation structural fiberglass based on a VPS-48 prepreg during quasi-static tests in the uniaxial tension and interlaminar shear. The results of studies on the effect of elevated temperature and preliminary thermal aging on the residual mechanical properties of the material were shown. Results of a preliminary thermal aging (under different regimes) on the mechanical characteristics, the nature of deformation and the implementation of various mechanisms of destruction the composite during interlaminar shear tests were obtained. The laws of changes in the properties of the thermally aged fiberglass during tensile and interlaminar shear tests were studied on the basis of a comprehensive analysis of its mechanical characteristics and AE signals. The time dependences of AE signal parameters for fiberglass specimens were obtained. The paper illustrates distributions of the frequency of spectral maximum of acoustic emission signals obtained after the destruction of specimens with different regimes of preliminary thermal aging presented graphically. An analysis of the microstructure of the surface of specimens before and after a preliminary thermal aging was carried out.
引用
收藏
页码:101 / 114
页数:14
相关论文
共 50 条
  • [31] Effect of structural factors on the effectiveness of evaluating the mechanical properties of ceramics and refractories using active acoustic methods
    Gogotsi, G.A.
    Negovskii, A.N.
    Refractories (English translation of Ogneupory), 1988, 29 (1-2): : 80 - 87
  • [33] Investigating the Synergetic Effect of Ultraviolet Radiation and Elevated Temperature on Mechanical and Thermal Properties of Glass Fiber-Reinforced Plastic Pipes
    Al-Samhan, Meshal
    Samuel, Jacob
    Al-Attar, Fatema
    Al-Banna, A.
    Abraham, Gils
    JOURNAL OF PIPELINE SYSTEMS ENGINEERING AND PRACTICE, 2020, 11 (01)
  • [34] Effect of acrylonitrile-butadiene-styrene/polyethylene terephthalate blends on dimensional stability, morphological, physical and mechanical properties and after aging at elevated temperature
    Oral, Mehmet A.
    Ersoy, Osman G.
    Serhatli, Ersin I.
    JOURNAL OF PLASTIC FILM & SHEETING, 2018, 34 (04) : 394 - 417
  • [35] The effect of thermal shock temperature difference on the structural, dynamics and mechanical properties of carbon materials characterized by ultrasonic test technology
    Deng, Qin
    Wei, Wenfu
    Yin, Guofeng
    Xie, Wenhan
    Huang, Zhanglin
    Ren, Junwen
    Yang, Yan
    Chen, Qichen
    Wu, Guangning
    JOURNAL OF MATERIALS SCIENCE, 2021, 56 (33) : 18522 - 18533
  • [36] The effect of thermal shock temperature difference on the structural, dynamics and mechanical properties of carbon materials characterized by ultrasonic test technology
    Qin Deng
    Wenfu Wei
    Guofeng Yin
    Wenhan Xie
    Zhanglin Huang
    Junwen Ren
    Yan Yang
    Qichen Chen
    Guangning Wu
    Journal of Materials Science, 2021, 56 : 18522 - 18533
  • [37] Elevated Temperature Baseplate Effect on Microstructure, Mechanical Properties, and Thermal Stress Evaluation by Numerical Simulation for Austenite Stainless Steel 316L Fabricated by Directed Energy Deposition
    Kiran, Abhilash
    Li, Ying
    Koukolikova, Martina
    Brazda, Michal
    Hodek, Josef
    Urbanek, Miroslav
    Dzugan, Jan
    Raghavan, Srinivasan
    Odehnal, Josef
    MATERIALS, 2022, 15 (12)
  • [38] Effect of post fabrication aging treatment on the microstructure, crystallographic texture and elevated temperature mechanical properties of IN718 alloy fabricated by selective laser melting
    Ozer, Seren
    Bilgin, Guney Mert
    Davut, Kemal
    Esen, Ziya
    Dericioglu, Arcan F.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2022, 306
  • [39] Evaluation of the Effect of Exposure Duration and Fiber Content on the Mechanical Properties of Polypropylene Fiber-Reinforced UHPC Exposed to Sustained Elevated Temperature
    Rasul, Mehboob
    Ahmad, Shamsad
    Adekunle, Saheed Kolawole
    Al-Dulaijan, Salah U.
    Maslehuddin, Mohammed
    Ali, Syed Imran
    JOURNAL OF TESTING AND EVALUATION, 2020, 48 (06) : 4355 - 4369
  • [40] Effect of pre-deformation on micro-structural thermal-stability and mechanical properties at elevated temperatures of 2D12 alloy
    Wang, Heng
    Liu, Zhi-Yi
    Peng, Jiang-Tao
    Huang, Wen-Jie
    Liu, Xiong
    Liu, Can-Wei
    Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2012, 17 (05): : 639 - 644