A Design of a 2 DoF Planar Parallel Manipulator with an Electro-Pneumatic Servo-Drive-Part 2

被引：3
|
作者：
Takosoglu, Jakub [1 ]
Janus-Galkiewicz, Urszula [1 ]
Galkiewicz, Jaroslaw [1 ]
机构：
[1] Kielce Univ Technol, Fac Mechatron & Mech Engn, Aleja Tysiaclec Panstwa Polskiego 7, PL-25314 Kielce, Poland
来源：
ENERGIES | 2023年 / 16卷 / 07期
关键词：
planar parallel manipulator; fuzzy logic controller; pneumatic positioning system; electro-pneumatic servo-drive; ARCHITECTURE; WORKSPACES;
D O I：
10.3390/en16072970
中图分类号：
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号：
0807 ; 0820 ;
摘要：
This paper is the second part of the study of a planar manipulator and this section presents the construction of a prototype manipulator. A fuzzy control system for the manipulator is described in detail. An experimental study was carried out on the positioning of the end effector of the manipulator and a program written in the Delphi 6 environment was proposed to calculate the position. Prototype tests were performed for transpose and follow-up control. Based on the experimental results, a control quality analysis was carried out.
引用
收藏
页数：10
相关论文
共 50 条
  • [21] Realization and Simulation of Motion Trajectory of a 2-DOF Planar Parallel Manipulator
    Zhu, Xiaorong
    Shen, Huiping
    Zhu, Wei
    MATERIALS, MECHATRONICS AND AUTOMATION, PTS 1-3, 2011, 467-469 : 1351 - 1356
  • [22] Modeling, identification and control of a redundant planar 2-DOF parallel manipulator
    Department of Automation, University of Science and Technology of China, Hefei P. O. Box 4, Anhui 230027, China
    不详
    不详
    Int. J. Control Autom. Syst., 2007, 5 (559-569):
  • [23] Analysis of performances of planar 2-DOF parallel manipulator with actuation redundancy
    Zhang, Lijie
    Liu, Ying
    Huang, Zhen
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2006, 42 (07): : 181 - 185
  • [24] Modeling, identification and control of a redundant planar 2-dof parallel manipulator
    Zhang, Yao-Xin
    Cong, Shuang
    Shang, Wei-Wei
    Li, Ze-Xiang
    Jiang, Shi-Long
    INTERNATIONAL JOURNAL OF CONTROL AUTOMATION AND SYSTEMS, 2007, 5 (05) : 559 - 569
  • [25] Control of 2dof Planar Parallel Manipulator Using Backstepping Approach
    Litim, Mustapha.
    Omari, Abdelhafid.
    Larbi, Mohamed El Amine.
    CONTROL ENGINEERING AND APPLIED INFORMATICS, 2015, 17 (02): : 90 - 98
  • [26] MODELLING A 2 DOF FLEXIBLE PLANAR MANIPULATOR
    Cinquemani, Simone
    Giberti, Hermes
    3RD INTERNATIONAL CONFERENCE OF EDUCATION, RESEARCH AND INNOVATION (ICERI2010), 2010, : 1211 - 1219
  • [27] Kinematic Calibration and Forecast Error Compensation of a 2-DOF Planar Parallel Manipulator
    CHANG Peng1
    revised January 7
    accepted June 30
    published electronically July 28
    Chinese Journal of Mechanical Engineering, 2011, 24 (06) : 992 - 998
  • [28] Robust nonlinear control of a planar 2-DOF parallel manipulator with redundant actuation
    Shang, Weiwei
    Cong, Shuang
    ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2014, 30 (06) : 597 - 604
  • [29] Kinematic Calibration and Forecast Error Compensation of a 2-DOF Planar Parallel Manipulator
    Chang Peng
    Li Chengrong
    Li Tiemin
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2011, 24 (06) : 992 - 998
  • [30] Experimental verification of antagonistic stiffness planning for a 2-DOF planar parallel manipulator
    Lee, Sungcheul
    In, Woosung
    Kim, Sitai
    Jeong, Jay I.
    Kim, Jongwon
    2009 IEEE-RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS, 2009, : 291 - 296
12345