Polysulfone nanofiber-modified composite laminates: Investigation of mode-I fatigue behavior and damage mechanisms

被引:7
|
作者
Mohammadi, Reza [1 ]
Akrami, Roya [2 ]
Assaad, Maher [3 ]
Nasor, Mohamed [4 ]
Imran, Ahmed [4 ]
Fotouhi, Mohammad [1 ]
机构
[1] Delft Univ Technol, Fac Civil Engn & Geosci, NL-2628 CD Delft, Netherlands
[2] Univ Strathclyde, Dept Mech & Aerosp Engn, 75 Montrose St, Glasgow G1 1XJ, Scotland
[3] Ajman Univ, Coll Engn & IT, Dept Elect & Comp Engn, POB 346, Ajman, U Arab Emirates
[4] Ajman Univ, Coll Engn & IT, Dept Biomed Engn, POB 346, Ajman, U Arab Emirates
基金
英国工程与自然科学研究理事会;
关键词
Carbon/epoxy; Polysulfone nanofiber; Electro spinning process; Fatigue crack growth rate; Fracture toughness; INTERLAMINAR FRACTURE-TOUGHNESS; CARBON/EPOXY COMPOSITE; RESISTANCE;
D O I
10.1016/j.tafmec.2023.104078
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this study, the fatigue properties of carbon fiber-reinforced polymer (CFRP) composite laminates were investigated, specifically focusing on the incorporation of 100-mu m polysulfone (PSU) nanofibers as an interleaving material. The PSU nanofibers were produced using the electrospinning technique. Both quasi-static and fatigue tests were conducted on both the reference specimens and the modified specimens to evaluate their mode-I performance. The results revealed an 85% increase in fracture toughness (GIC) under quasi-static testing. The fatigue plots revealed a noteworthy reduction in the fatigue crack growth rate (da/dN) for the modified specimens due to new toughening mechanisms. Scanning electron microscopy (SEM) demonstrated that, the PSU nanofiber became melted and distributed in the interface, leading to phase separation and a sea-island structure. The presence of PSU microspheres caused crack deflection during delamination, which resulted in increased fracture and fatigue resistance.
引用
收藏
页数:10
相关论文
共 50 条