In-Plane Structural Analysis of Coated Masonry Walls via a Homogenized Model

An orthotropic homogenized model is used to investigate the in-plane elastic behavior of coated masonry walls. The homogenization process mainly consists of modeling the elementary cell of a three-layer medium by using suitable designed assemblies of in-parallel springs. On the basis of the latter, the stresses distributed between masonry and reinforcement coatings are analytically assessed after the determination of the average stress acting on the homogeneous medium. The precision of the theoretical outcomes is evaluated through comparisons with finite element (FE) models. Static and dynamic numerical analyses are carried out on both non-homogeneous and homogeneous FE models of sample systems. The homogeneous model is observed to adequately capture both the local and global behavior of reinforced masonry walls. Parametric analyses are also performed to investigate the effectiveness of reinforcement on the overall behavior of the system.