Tribological behavior of 3D printed biomimetic surfaces

被引：5
|
作者：
Mzali, Slah [1 ]
Elwasli, Fatma [1 ]
Mezlini, Salah [1 ]
Hajlaoui, Khalil [2 ]
Alrasheedi, Nashmi H. [2 ]
机构：
[1] Univ Monastir, Ecole Natl Ingenieurs Monastir, Lab Genie Mecan, Monastir, Tunisia
[2] Imam Mohammad Ibn Saud Islamic Univ IMSIU, Coll Engn, Riyadh, Saudi Arabia
来源：
TRIBOLOGY INTERNATIONAL | 2024年 / 193卷
关键词：
FDM; Bioinspired surfaces; Friction anisotropy; Reciprocating sliding; Friction maps; PROCESS PARAMETERS; WEAR PERFORMANCE; FRICTION; PLA; FABRICATION; PLASTICS; REGIMES; SCALE; ABS; DRY;
D O I：
10.1016/j.triboint.2024.109352
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Tribological behavior of five different surfaces patterns, bioinspired from maize leaf skin, shark skin, snakeskin, pitcher's structure and lizard skin, was investigated. Bioinspired surfaces have been printed using Fused Deposition Modelling (FDM) technology from a marked Poly Lactic Acid (PLA). Tribological tests were carried out using a reciprocating sliding device under dry conditions at room temperature. Particular interest was given to the investigation of the friction anisotropy as well as the wear mechanisms. The correlation between the apparent friction coefficient and the test conditions, particularly, the 3D printed bioinspired surface patterns and the number of cycles, was emphasized via the friction maps.
引用
收藏
页数：13
相关论文
共 50 条
  • [41] 3D-Printed Biomimetic Hierarchical Nacre Architecture: Fracture Behavior and Analysis
    Patadiya, Jigar
    Wang, Xungai
    Joshi, Ganapati
    Kandasubramanian, Balasubramanian
    Naebe, Minoo
    ACS OMEGA, 2023, 8 (21): : 18449 - 18461
  • [42] 3D Printed Deformable Surfaces for Shape-Changing Displays
    Everitt, Aluna
    Alexander, Jason
    FRONTIERS IN ROBOTICS AND AI, 2019, 6
  • [43] 3D Printed Functional and Biological Materials on Moving Freeform Surfaces
    Zhu, Zhijie
    Guo, Shuang-Zhuang
    Hirdler, Tessa
    Eide, Cindy
    Fan, Xiaoxiao
    Tolar, Jakub
    McAlpine, Michael C.
    ADVANCED MATERIALS, 2018, 30 (23)
  • [44] Quality Evaluation of 3D Printed Surfaces Based on HOG Features
    Lech, Piotr
    Fastowicz, Jaroslaw
    Okarma, Krzysztof
    COMPUTER VISION AND GRAPHICS ( ICCVG 2018), 2018, 11114 : 199 - 208
  • [45] Classification and automated quality assurance of 3D concrete printed surfaces
    Otto, Jens
    Maiwald, Patrick
    AUTOMATION IN CONSTRUCTION, 2024, 164
  • [46] Improved Embedding of QR Codes onto Surfaces to be 3D Printed
    Papp, Gyorgy
    Hoffmann, Miklos
    Papp, Ildiko
    COMPUTER-AIDED DESIGN, 2021, 131
  • [47] 3D printed biomimetic epithelium/stroma bilayer hydrogel implant for corneal regeneration
    He, Binbin
    Wang, Jie
    Xie, Mengtian
    Xu, Miaoyi
    Zhang, Yahan
    Hao, Huijie
    Xing, Xiaoli
    Lu, William
    Han, Quanhong
    Liu, Wenguang
    BIOACTIVE MATERIALS, 2022, 17 : 234 - 247
  • [48] 3D Printed Biomimetic Rabbit Airway Simulation Model for Nasotracheal Intubation Training
    Oberoi, Gunpreet
    Eberspacher-Schweda, M. C.
    Hatamikia, Sepideh
    Konigshofer, Markus
    Baumgartner, Doris
    Kramer, Anne-Margarethe
    Schaffarich, Peter
    Agis, Hermann
    Moscato, Francesco
    Unger, Ewald
    FRONTIERS IN VETERINARY SCIENCE, 2020, 7
  • [49] Compressive behavior of 3D printed MWCNT/HDPE nanocomposites
    Kumar, Sumodh
    Ramesh, M. R.
    Doddamani, Mrityunjay
    COMPOSITES COMMUNICATIONS, 2022, 35
  • [50] IMPACT BEHAVIOR AND FAILURE OF 3D PRINTED REINFORCED COMPOSITES
    Liu, Xiaofang
    Saigal, Anil
    Zimmerman, Michael
    PROCEEDINGS OF ASME 2023 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2023, VOL 4, 2023,
12345