Tribological behavior of 3D printed biomimetic surfaces

被引：5
|
作者：
Mzali, Slah [1 ]
Elwasli, Fatma [1 ]
Mezlini, Salah [1 ]
Hajlaoui, Khalil [2 ]
Alrasheedi, Nashmi H. [2 ]
机构：
[1] Univ Monastir, Ecole Natl Ingenieurs Monastir, Lab Genie Mecan, Monastir, Tunisia
[2] Imam Mohammad Ibn Saud Islamic Univ IMSIU, Coll Engn, Riyadh, Saudi Arabia
来源：
TRIBOLOGY INTERNATIONAL | 2024年 / 193卷
关键词：
FDM; Bioinspired surfaces; Friction anisotropy; Reciprocating sliding; Friction maps; PROCESS PARAMETERS; WEAR PERFORMANCE; FRICTION; PLA; FABRICATION; PLASTICS; REGIMES; SCALE; ABS; DRY;
D O I：
10.1016/j.triboint.2024.109352
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Tribological behavior of five different surfaces patterns, bioinspired from maize leaf skin, shark skin, snakeskin, pitcher's structure and lizard skin, was investigated. Bioinspired surfaces have been printed using Fused Deposition Modelling (FDM) technology from a marked Poly Lactic Acid (PLA). Tribological tests were carried out using a reciprocating sliding device under dry conditions at room temperature. Particular interest was given to the investigation of the friction anisotropy as well as the wear mechanisms. The correlation between the apparent friction coefficient and the test conditions, particularly, the 3D printed bioinspired surface patterns and the number of cycles, was emphasized via the friction maps.
引用
收藏
页数：13
相关论文
共 50 条
  • [31] INDUSTRIAL DESIGN OPTIMISATION FOR 3D PRINTED BIOMIMETIC GRIPPERS IN TITANIUM ALLOY
    Thallemer, A.
    Danzar, M.
    Diensthuber, D.
    Kostadinov, A.
    Rogler, B.
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING, 2018, : 262 - 267
  • [32] Biomimetic Design of 3D Printed Tissue-Engineered Bone Constructs
    Liu, Wei
    Liu, Shifeng
    Li, Yunzhe
    Zhou, Peng
    Ma, Qian
    CURRENT NANOSCIENCE, 2021, 17 (02) : 223 - 240
  • [33] 3D Printed Biomimetic Vascular Phantoms for Assessment of Hyperspectral Imaging Systems
    Wang, Jianting
    Ghassemi, Pejhman
    Melchiorri, Anthony
    Ramella-Roman, Jessica
    Mathews, Scott A.
    Coburn, James
    Sorg, Brian
    Chen, Yu
    Pfefer, Joshua
    DESIGN AND PERFORMANCE VALIDATION OF PHANTOMS USED IN CONJUNCTION WITH OPTICAL MEASUREMENT OF TISSUE VII, 2015, 9325
  • [34] Development and analysis of three-dimensional (3D) printed biomimetic ceramic
    Jung-Seob Lee
    Young-Joon Seol
    Min Sung
    Wonkyu Moon
    Sung Won Kim
    Jeong-Hoon Oh
    Dong-Woo Cho
    International Journal of Precision Engineering and Manufacturing, 2016, 17 : 1711 - 1719
  • [35] Criteria for Evaluating the Tribological Effectiveness of 3D Roughness on Friction Surfaces
    Stelmakh, Oleksandr
    Fu, Hongyu
    Kolienov, Serhii
    Kanevskii, Vasyl
    Zhang, Hao
    Hu, Chenxing
    Grygoruk, Valerii
    LUBRICANTS, 2024, 12 (06)
  • [36] Dissolution behavior of biomimetic minerals on 3D PLGA scaffold
    Jayasuriya, A. Champa
    Assad, Malak
    Jayatissa, Ahalapitiya H.
    EbraheiM, Nabil A.
    SURFACE & COATINGS TECHNOLOGY, 2006, 200 (22-23): : 6336 - 6339
  • [37] Influence of 3D topography on tribological behavior of grinding wheel
    Choudhary, Akshit
    Babu, N. Ramesh
    48TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE, NAMRC 48, 2020, 48 : 533 - 540
  • [38] Vibrational behavior of a 3D printed biomimetic dual-core composite sandwich beam: An experimental and numerical study
    Thanikasalam, Narayanan
    Ramamoorthy, Manoharan
    POLYMER COMPOSITES, 2024, 45 (02) : 1178 - 1194
  • [39] 3D Printed
    Good, Andrew
    MATERIALS EVALUATION, 2016, 74 (07) : 984 - 989
  • [40] Proposal of Biomimetic Tribological System to Control Friction Behavior under Boundary Lubrication by Applying 3D Metal Printing Process
    Yonehara, Misa
    Okubo, Hikaru
    Tadokoro, Chiharu
    Sasaki, Shinya
    Prakash, Braham
    TRIBOLOGY ONLINE, 2018, 13 (01): : 8 - 14
12345