Growth Mechanism of Eutectic Si in Super-Gravity Solidified Al-Si Alloy during Annealing

被引:5
|
作者
Lu, Yuehui [1 ]
Wu, Chuandong [1 ,2 ]
Wu, Hao [1 ]
Wang, Jiamin [1 ]
Su, Yin [1 ]
Gan, Zhanghua [1 ,2 ]
Liu, Jing [1 ,2 ]
机构
[1] Wuhan Univ Sci & Technol, State Key Lab Refractories & Met, Wuhan 430081, Peoples R China
[2] Hubei Engn Technol Res Ctr Marine Mat & Serv Safet, Wuhan 430081, Peoples R China
基金
中国国家自然科学基金;
关键词
super-gravity solidification; Al alloys; annealing; MICROSTRUCTURE EVOLUTION; PRECIPITATION KINETICS; NUMERICAL-SIMULATION; GRAIN-REFINEMENT; HIGH-PRESSURE; PHASE; MORPHOLOGY; SEPARATION; FIELD;
D O I
10.3390/cryst13040684
中图分类号
O7 [晶体学];
学科分类号
0702 ; 070205 ; 0703 ; 080501 ;
摘要
Herein, we report that the influence of annealing time on the microstructure and mechanical properties of Al-14.5Si alloys solidified under a super-gravity field. The results indicate that the coarsening of metastable eutectic Si and formation of precipitated Si could be observed at the early stage of annealing. A slight increase in yield strength and tensile strength could be observed in the sample annealed for 0.25 h, which can be ascribed to the formation of precipitated Si with limited size during the early stage of annealing. The intensified diffusion of Si atoms during annealing led to the coarsening and coalescence of the eutectic Si, as well as the coarsening of precipitated Si with further extension of the annealing time.
引用
收藏
页数:11
相关论文
共 50 条
  • [31] A novel modifier on eutectic Si and mechanical properties of Al-Si alloy
    Jiang, Bo
    Ji, Zesheng
    Hu, Maoliang
    Xu, Hongyu
    Xu, Song
    MATERIALS LETTERS, 2019, 239 : 13 - 16
  • [32] Effect of humidity on friction and wear of Al-Si eutectic alloy and Al-Si alloy-graphite composites
    Yen, BK
    Ishihara, T
    WEAR, 1996, 198 (1-2) : 169 - 175
  • [33] Effects of Strontium,Magnesium Addition,Temperature Gradient,and Growth Velocity on Al-Si Eutectic Growth in a Unidirectionally-solidified Al-13 wt%,Si Alloy
    Hengcheng Liao
    Wanru Huang
    Qigui Wang
    Fang Jia
    Journal of Materials Science & Technology, 2014, 30 (02) : 146 - 153
  • [34] Effects of Strontium, Magnesium Addition, Temperature Gradient, and Growth Velocity on Al-Si Eutectic Growth in a Unidirectionally- solidified Al-13 wt% Si Alloy
    Liao, Hengcheng
    Huang, Wanru
    Wang, Qigui
    Jia, Fang
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2014, 30 (02) : 146 - 153
  • [35] SEPARATED EUTECTIC STRUCTURE OF UNIDIRECTIONALLY SOLIDIFIED AL-SI EUTECTIC ALLOY CAUSED BY FORCED-CONVECTION FLOW
    SHINGU, PH
    KUROSAKI, M
    JIN, JZ
    TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1986, 27 (07): : 546 - 551
  • [36] VICKERS HARDNESS MEASUREMENTS OF UNIDIRECTIONALLY SOLIDIFIED AL-SI EUTECTIC ALLOY GROWN AT DIFFERENT RATES
    JUSTI, S
    BRAGG, RH
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1976, 7 (12): : 1954 - 1957
  • [37] EFFECT OF ANTIMONY ADDITIONS ON HARDNESS AND TENSILE PROPERTIES OF DIRECTIONALLY SOLIDIFIED AL-SI EUTECTIC ALLOY
    TELLI, AI
    KISAKUREK, SE
    MATERIALS SCIENCE AND TECHNOLOGY, 1988, 4 (02) : 153 - 156
  • [38] Coarsening characteristic of Si particles in powders of rapidly solidified Al-Si alloy
    Wang, Hua
    Yu, Fu-Xiao
    Sun, Zhen-Guo
    Zhuzao/Foundry, 2007, 56 (01): : 65 - 67
  • [39] Spheroidization of the Al-Si eutectic in a cast aluminum alloy
    Páramo, V
    Colás, R
    Velasco, E
    Valtierra, S
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2000, 9 (06) : 616 - 622
  • [40] Investigation on Wear Behavior of Al-Si Eutectic Alloy
    Al-Ethari, Haydar
    Haleem, Ali Hubi
    Hassan, Muhanad Hamid
    2021 12TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING (ICMAE), 2021, : 176 - 180