Growth Mechanism of Eutectic Si in Super-Gravity Solidified Al-Si Alloy during Annealing

被引:5
|
作者
Lu, Yuehui [1 ]
Wu, Chuandong [1 ,2 ]
Wu, Hao [1 ]
Wang, Jiamin [1 ]
Su, Yin [1 ]
Gan, Zhanghua [1 ,2 ]
Liu, Jing [1 ,2 ]
机构
[1] Wuhan Univ Sci & Technol, State Key Lab Refractories & Met, Wuhan 430081, Peoples R China
[2] Hubei Engn Technol Res Ctr Marine Mat & Serv Safet, Wuhan 430081, Peoples R China
基金
中国国家自然科学基金;
关键词
super-gravity solidification; Al alloys; annealing; MICROSTRUCTURE EVOLUTION; PRECIPITATION KINETICS; NUMERICAL-SIMULATION; GRAIN-REFINEMENT; HIGH-PRESSURE; PHASE; MORPHOLOGY; SEPARATION; FIELD;
D O I
10.3390/cryst13040684
中图分类号
O7 [晶体学];
学科分类号
0702 ; 070205 ; 0703 ; 080501 ;
摘要
Herein, we report that the influence of annealing time on the microstructure and mechanical properties of Al-14.5Si alloys solidified under a super-gravity field. The results indicate that the coarsening of metastable eutectic Si and formation of precipitated Si could be observed at the early stage of annealing. A slight increase in yield strength and tensile strength could be observed in the sample annealed for 0.25 h, which can be ascribed to the formation of precipitated Si with limited size during the early stage of annealing. The intensified diffusion of Si atoms during annealing led to the coarsening and coalescence of the eutectic Si, as well as the coarsening of precipitated Si with further extension of the annealing time.
引用
收藏
页数:11
相关论文
共 50 条
  • [21] CAVITATION BEHAVIOR IN AL-SI EUTECTIC ALLOY
    MAHIDHARA, RK
    MUKHERJEE, AK
    MATERIALS TRANSACTIONS JIM, 1995, 36 (04): : 570 - 572
  • [22] PARTIAL MODIFICATION IN UNIDIRECTIONALLY SOLIDIFIED AL-SI EUTECTIC ALLOYS
    CLAPHAM, L
    SMITH, RW
    ACTA METALLURGICA, 1989, 37 (01): : 303 - 311
  • [23] MECHANICAL-PROPERTIES OF DIRECTIONALLY SOLIDIFIED AL-SI EUTECTIC
    MORROW, DG
    BRAGG, RH
    JOM-JOURNAL OF METALS, 1975, 27 (12): : A14 - A14
  • [24] PARTIAL MODIFICATION IN UNIDIRECTIONALLY SOLIDIFIED AL-SI EUTECTIC ALLOYS
    CLAPHAM, L
    SMITH, RW
    CIM BULLETIN, 1988, 81 (914): : 94 - 94
  • [25] Effect of the temperature gradient, growth rate, and the interflake spacing on the microhardness in the directionally solidified Al-Si eutectic alloy
    Kaya, H
    Çadirli, E
    Gündüz, M
    Ülgen, A
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2003, 12 (05) : 544 - 551
  • [26] Effect of the temperature gradient, growth rate, and the interflake spacing on the microhardness in the directionally solidified Al-Si eutectic alloy
    H. Kaya
    E. Çadırh
    M. Gündüz
    A. Ülgen
    Journal of Materials Engineering and Performance, 2003, 12 : 544 - 551
  • [27] Approach to Modified Mechanism of Eutectic Si in Alumina Fiber Reinforced Al-Si Alloy Composites
    Liu, Zheng
    Liu, Xiao-mei
    MECHATRONICS AND INTELLIGENT MATERIALS II, PTS 1-6, 2012, 490-495 : 3070 - 3073
  • [28] Massive Si phase and its growth mechanism in Al-Si casting alloy
    Liao, HC
    Sun, GX
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2004, 20 (05) : 589 - 591
  • [29] Massive Si Phase and Its Growth Mechanism in Al-Si Casting Alloy
    Hengcheng LIAO and Guoxiong SUNDepaxtment of Materials Science and Engineering
    Journal of Materials Science & Technology, 2004, (05) : 589 - 591
  • [30] Modelling Eutectic Growth in Unmodified and Modified Near-Eutectic Al-Si Alloy
    Tiedje, Niels Skat
    Hattel, Jesper
    Taylor, John A.
    Easton, Mark A.
    LIGHT METALS TECHNOLOGY 2013, 2013, 765 : 160 - +