Impact of intermediate aging on the evolution of microstructure and intermetallics in thermomechanically processed Al-Cu-Mg alloy

被引:3
|
作者
Pouraliakbar, Hesam [1 ]
Ghorbanzadeh, Zahra [2 ]
Fallah, Vahid [1 ]
Monazzah, Asal Hosseini [2 ]
机构
[1] Queens Univ, Dept Mech & Mat Engn, Azar Adv Mfg Lab AAML, Kingston, ON K7L 3N6, Canada
[2] Shahid Beheshti Univ, Fac Mech & Energy Engn, Dept Mat & Met, Tehran, Iran
关键词
Al-Cu-Mg alloy; Thermomechanical processing; Microstructure evolution; Aging; Heat treatment; Intermetallic compound;
D O I
10.1016/j.matlet.2023.135548
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Various thermomechanical processing routes were applied to Al-Cu-Mg alloy to investigate the evolution of microstructure and intermetallics. The microstructure characterization primarily revealed Cu-rich (Al7Cu2(Fe, Mn)) and Fe,Mn-rich (AlCuMnFeSi) compounds. The analysis indicated that the processing significantly transformed the Cu-rich particles. The trend of changes in volume fraction demonstrated that intermediate aging effectively suppressed the nucleation of particles and retained the solutes within the aluminum. It is suggested that the transformation kinetics of intermetallics were substantially affected by the formation of particles during aging acting as diffusion barriers.
引用
收藏
页数:6
相关论文
共 50 条
  • [21] Aging behaviour of Al-Cu-Mg alloy-SiC composites
    Pal, Sharmilee
    Mitra, R.
    Bhanuprasad, V. V.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 480 (1-2): : 496 - 505
  • [22] Effect of Ni on Aging Behavior of Al-Cu-Mg Alloy Cladding
    Farajollahi, Ramezanali
    Aval, Hamed Jamshidi
    Jamaati, Roohollah
    Javidani, Mousa
    JOM, 2023, 75 (11) : 4931 - 4945
  • [23] Dependence of Creep Properties on Aging Treatment in Al-Cu-Mg Alloy
    Zhang, Bingyi
    Zhang, Shasha
    Du, Haiquan
    Yao, Zhengjun
    Kong, Xiang-shan
    Tao, Xuewei
    ADVANCED ENGINEERING MATERIALS, 2022, 24 (06)
  • [24] Effects of sintering time on the microstructure and properties of an Al-Cu-Mg alloy
    Du, Xinyang
    Liu, Rutie
    Xiong, Xiang
    Liu, Hongwei
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (05): : 9657 - 9666
  • [25] Effect of delayed aging on mechanical properties of an Al-Cu-Mg alloy
    S. P. Ravindranathan
    K. T. Kashyap
    S. Ravi Kumar
    C. Ramachandra
    B. Chatterji
    Journal of Materials Engineering and Performance, 2000, 9 : 24 - 27
  • [26] Effect of delayed aging on mechanical properties of an Al-Cu-Mg alloy
    Ravindranathan, SP
    Kashyap, KT
    Kumar, SR
    Ramachandra, C
    Chatterji, B
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2000, 9 (01) : 24 - 27
  • [27] Effect of Ni on Aging Behavior of Al-Cu-Mg Alloy Cladding
    Ramezanali Farajollahi
    Hamed Jamshidi Aval
    Roohollah Jamaati
    Mousa Javidani
    JOM, 2023, 75 : 4931 - 4945
  • [28] The Microstructure and Fatigue of Ultrafine-Grained Al-Cu-Mg Alloy
    Islanigaliev, R. K.
    Khafizova, E. D.
    Kulyasova, O. B.
    Nesterov, K. M.
    Ganeev, A. V.
    Golubovskiy, E. R.
    Volkov, M. E.
    ACTA PHYSICA POLONICA A, 2015, 128 (04) : 633 - 636
  • [29] Constitutive Modeling for Al-Cu-Mg Alloy in Creep Aging Process
    Yang, Y. L.
    Zhan, L. H.
    Xu, X. L.
    STRENGTH OF MATERIALS, 2016, 48 (01) : 23 - 31
  • [30] Effect of trace Ag on the microstructure and precipitation of an Al-Cu-Mg alloy
    Zhang, L
    Min, G
    Yu, H
    Feng, G
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2006, 19 (02) : 134 - 136